Professional Documents
Culture Documents
Tripp Lite Owners Manual 796960
Tripp Lite Owners Manual 796960
www.tripplite.com/warranty
Product Features
All Models:
• Convert your fiber network to a copper network with the addition of power
• Supports 10/100/1000 Mbps speeds
• Supports up to 100 m (328 ft.) over Cat5e/Cat6 cable to your PoE-
compliant device
• IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at compliant
• Auto identification of MDI/MDI-X
• Supports full-duplex and half-duplex modes
• LED indicators monitor Ethernet and Fiber link status
• Link Fault Pass Through (LFP) allows network personnel to quickly identify
faults
Optical Fiber Max Distance
Model Connector Wavelength Mode from Source
N785-P01-LC-MM1 LC 850 nm Multimode 550 m (1804 ft.)
N785-P01-SC-MM1 SC 850 nm Multimode 550 m (1804 ft.)
N785-P01-SC-MM2 SC 1310 nm Multimode 2000 m (6561 ft.)
N785-P01-SC-SM1 SC 1310 nm Singlemode 20 km (12.4 mi.)
N785-P01-SFP User-definable Dependent Dependent Dependent on
on on transceivers used
transceivers transceivers
used used
Accessories
All Models:
• N001-Series Cat5e Snagless Patch Cables
• N201-Series Cat6 Snagless Patch Cables
PoE Device
Up to 100 m
(328 ft.) via Data + Power Out
550 m (1804 ft.) - 20 km (12.4 mi.) Cat5e/6 Cable
Data In
Source
Fiber Network Cable
Power Source
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice. Photos and illustrations may differ slightly from actual products.
8
19-03-251 93-395E_RevB