Professional Documents
Culture Documents
EG Handout
EG Handout
Team of Instructors:
Varinder Singh, Devendra G Patil, Sandeep Jose, Mali Kiran Dinkar, Ravindra Singh Saluja, Amal
S Siju, Anandteerth, Sudhy S.. Panicker, Mane Sanjay Pandurang, Gavade Atul Arjun, Shandilya
Siddhartha Devendra, Vipin Gupta, Dhiraj Bhimrao Puri, Suhas Nayaku Ankalkhope, Pradyumna
Kodancha, Kulkarni Sudhanwa Mahesh, Ravi Raj B M
Learning outcomes:
After completion of the course, the student will be able to:
Conceive product concepts clearly and use established standards for producing orthographic
and isometric drawings.
Use the concepts of spatial geometry for drawing projections of various complex shapes.
Use advanced concepts such as cut-sections useful for aiding the manufacturing and
assembly processes involved in complex products
Use advanced concepts such as development of the surfaces of solids for aiding the
manufacturing.
Text Book : D.M. Kulkarni, A.P.Rastogi and A. Sarkar., Engineering Graphics with AutoCAD, PHI
publisher, revised edition, July 2010
References:
1) N. D. Bhatt & V. M. Panchal., Engineering Drawing, Charotar Publisher, 2007.
2) Dhanjay A Jolhe, Engineering Drawing, Tata-Mcgarw hill, 2008.
1
Course Plan:
Topics to be covered Learning Objectives Approx. Chap./Sec.
Number of
Lab Classes
M1: Introduction to course Fundamental requirements for
Ch 1
completing the course
M2: Introducing the AutoCAD platform Basic commands for working on
2 Ch. 2 & Ch.4
AutoCAD
M3: Theories of Projections Fundamental syntax of
Ch 3
engineering drawings
M4: Orthographic projections Multi view drawing from pictorial
2 Ch. 5
views.
Theory of isometric drawing,
M5: Isometric drawings construction of isometric from 2 Ch. 6
orthographic.
M6: Projection of points and lines Fundamentals and procedures to
solve problems on spatial 2 Ch. 9
geometry for points and lines
M7: Projections of Planes Fundamentals and procedures to
solve problems on spatial 1 Ch. 10
geometry for planes
M8: Projections of Solids Fundamentals and procedures to
solve problems on spatial 1 Ch. 12
geometry for solids
M9: Sections of Solids How to draw selected features in
1 Ch. 13
solids prominently
M10: Development of surfaces How to manufacture hollow solids
1 Ch. 14
from sheets
Make – up policy:
Students may communicate the genuine reason(s) (only for medical reasons) for absence to the instructor in
charge through email prior to the absence and further the approval form the instructor in charge will be
intimated to the students.
Instructor-in-charge
(BITS F110)