Note: RRS8-00006 Cure Schedule: 10 MIN @ 400F Product Data Sheets are periodically 10 MIN @ 204C RAL 3001 GL updated to reflect new information Film Thickness Range(mils): 2.4-3.2 MILS relating to the product. It is important POWDURA® RAL series Superdurable that the customer obtain the most Polyester TGIC-Free powder coatings are ATTRIBUTES recent Product Data Sheet for the recommended for a broad range of interior / product being used. The information, Specific Gravity(g/ml): 1.43 exterior decorative applications. They are rating and opinions stated above designed to meet AAMA 2603 and provide Coverage at 1.0 Mil(ft2/lb): 135.4 pertain to the material currently offered superior weatherability compared to standard and represent the results of tests 60° Gloss: 85-100 polyester powder coatings. believed to be reliable. However, due to (ASTM D-523) variations in customer handling and Advantages: Adhesion: 5B methods of application, which are not Excellent exterior color and gloss (ASTM D-3359) known, or under our control, The retention Flexibility: Pass 1/8" Sherwin-Williams Company cannot Excellent overbake resistance (ASTM D-522) make any warranties or guaranties as to Good chemical resistance the end results. Pencil Hardness: H-2H Many applications, including: (ASTM D-3363) Windows Doors Impact Resistance(in.lb): Dir 40 in-lbs Frames (ASTM D-2794) Rev 40 in-lbs Railings Note: Performance measured using 17 00 Fencing Heavy Equipment 24-gauge Bonderite® 1000 test panels. Grove City Product Mod Storage: Powdura® Powder Coatings Shelf Life: 12 Months 03-Jul-2020 should be kept in a dry and cool area at temperatures below 80°F (27°C). When not in Sherwin-Williams recommends that all material be use, store powder in sealed containers: fine used in FIFO order ( first in - first out). Materials powders are hygroscopic. that exceed the recommended shelf life should be Substrate Preparation: Substrate should be tested prior to use. free of grease, oil, dirt, fingerprints, drawing compounds, any contamination, and surface preparation treatments to ensure optimum adhesion and coating performance properties. The use of a chemical conversion coating prior to the application of a powder coating is strongly recommended. Testing: Due to the wide variety of substrates, surface preparation methods, application methods, and environments, the customer should test the complete system for adhesion, compatibility and performance prior to full-scale application. CAUTIONS Thoroughly review product SDS prior to using this product. Please consult your local sales representative or your local Sherwin-Williams facility for additional information.