Professional Documents
Culture Documents
ZTE UMTS UR14 NodeB Optimization For Small Data Service Feature Guide
ZTE UMTS UR14 NodeB Optimization For Small Data Service Feature Guide
ZTE UMTS UR14 NodeB Optimization For Small Data Service Feature Guide
Service
Feature Guide
Optimization for small Data Service
TABLE OF CONTENTS
1 Feature Attribute ............................................................................................... 4
2 Overview ............................................................................................................ 4
2.1 Feature Introduction ............................................................................................. 4
2.2 License Control .................................................................................................... 5
2.3 Correlation With Other Features .......................................................................... 5
4 Parameters......................................................................................................... 7
7 Abbreviation .................................................................................................... 11
8 Reference Document....................................................................................... 11
FIGURES
TABLES
Table 4-1 Optimization for small Data Service Parameter List ............................................ 7
Table 5-1 Optimization for small Data Service Counter List ................................................ 8
Table 6-1 Optimization for small Data Service Validation Procedure ................................... 9
Table 6-2 NodeB Parameter List 1 .....................................................................................10
1 Feature Attribute
RNC version: [ RNC V3.14.10/RNC V4.14.10]
Attribute: [Optional]
Involved NEs:
NE Name Related or Not Special Requirement
MS/UE -
BTS/Node B √
BSC/RNC -
iTC -
MSC -
MGW -
SGSN -
GGSN -
HLR -
2 Overview
When this optimization is enabled, NodeB grants guaranteed SG for the UEs with
small-data services. With guaranteed SG, Uplink data can be sent as soon as possible.
Meanwhile UE online time can be shortened and control-channel UL load can be
reduced, Cell UL load can be balanced and most UEs have better experience in a
high-load cell.
This feature is controlled by a license. Before commissioning this feature, you must get
authorization through the OMC or LMT.
1. Required Features
None.
3. Affected Features
None.
3 Technical Description
In general situation, there are not many UL large-data services (e.g. FTP uploading,
Email) on a real commercial network. Data channel for large-data services always
occupy a great amount of UL load. But there are many small-data services such as
instant messaging, webpage browsing and streaming media on a real commercial
network. Small-data services have the features of small UL load consumption, short
online time and sensitive to delay.
The existing HSUPA scheduler will grant SG = 0 to most HSUPA UEs when current cell
UL load exceeds a ROT threshold configured in the system. In this situation, many UEs
wait for SG allocation so that they can run UL small-data services. Because SG is not
granted, UL data cannot be timely transmitted, causing online time to be extended.
During the waiting time, more control-channel power may be consumed. This further
deteriorates the uplink load of the whole cell.
To avoid such deterioration, the system should allocate the guaranteed SG for the UEs in
case of small-data services. Thus, these UEs can transmit data as soon as possible.
After successfully sending the data, they can quick switch to offline state and release
control-channel power. Finally, the UL load of the whole cell can be reduced.
Start
N UE.TEBS<NodeBFunction.
lowTrafficOptimAlgThr
TTI=2ms?
Y N
End
For more information, refer to the ZTE UMTS NodeB HSUPA Packet Scheduling in
NodeB Feature Guide.
It brings many benefits: uplink data can be sent as soon as possible, UE online time can
be shortened, control-channel UL load can be reduced, cell UL load can be balanced and
most UEs have acceptable experience in a high-load cell.
4 Parameters
Recom
Managed Logic Value Default
Parameter Description Unit mende
Object Name Range Value
d Value
Uplink low
NodeBFu
traffic
nction.low Optimised algorithm of uplink 0: Off
Optimising None 0: Off 1: On
TrafficOpti low traffic data service. 1: On
algorithm
mAlgSwch
switch
TEBS
NodeBFu threshold of
Minimum SG will be
nction.low Uplink low [0..31]
guaranteed for users whose None 20 20
TrafficOpti traffic step 1
TEBS below the threshold
mAlgThr Optimising
algorithm
Counter ID Name
OMMR counter->cell->#300660
OMMB counter->UPAcell->C372500012
6 Engineering Guide
In the configuration resource tree, select Modify Area > Managed Element > Radio
Parameter > UMTS and double-click UMTS. Set parameters. See Figure 6-1.
Test Steps 1. Close the Optimization for small Data Service function.
2. Set up one HSUPA 2ms service and one HSUPA 10ms service. Save
5. Set up one HSUPA 2ms service and one HSUPA 10ms service. Save
Anticipative Close the Optimization for small Data Service function, when TEBS=0,for
Result HSUPA 2ms service and 10ms service, SG=0.Open the Optimization for
This feature provides guaranteed SG (Serving Grant) for small-data service. Uplink
data can be sent as soon as possible to reduce UE online time. Then, the uplink
load can be balanced and most UEs in a high-load cell have acceptable experience.
7 Abbreviation
Abbreviation Full Name
rd
3GPP 3 Generation Partnership Project
PA Power Amplifier
SG Serving Grant
8 Reference Document
None.