Professional Documents
Culture Documents
Specification Sheet - SXPWL4WH-15 (16) - 65 (65) - iVT-V4
Specification Sheet - SXPWL4WH-15 (16) - 65 (65) - iVT-V4
Specification Sheet - SXPWL4WH-15 (16) - 65 (65) - iVT-V4
ELECTRICAL SPECIFICATIONS
R1 Y1, Y2, Y3, Y4
Frequency Range [MHz]
698-803 880-960 1710-1880 1920-2170 2490-2690
Gain [dBi] ≥ 15.0 ≥ 15.0 ≥ 15.0 ≥ 15.0 ≥ 16.0
Azimuth Beamwidth [º] [Half –power] ≥ 60 ≥ 60 ≥ 60.0 ≥ 60.0 ≥ 60.0
Elevation Beamwidth [º] [Half –power] ≥7 ≥ 6.7 ≥ 6.1 ≥ 6.3 ≥ 5.0
2-10° 2-10°
Electrical Downtilt [º]
Support AISG 2.0
1st Upper Sidelobe Level [dB] ≥ 15 dB ≥ 15 dB ≥ 15 dB ≥ 15 dB ≥ 15 dB
Front to Back Ratio @ 180°±30° [dB] ≥ 24 dB ≥ 24 dB ≥ 24 dB ≥ 24 dB ≥ 24 dB
Squint [º] 3 3 3 3 3
Cross Polar Discrimination Over Boresight [dB] ≥ 16 dB ≥ 16 dB ≥ 16 dB ≥ 16 dB ≥ 16 dB
Cross Polar Isolation [dB] > 25 > 25
Interband Isolation [dB] > 25
Polarization [º] ±45
Impedance [Ω] 50
VSWR < 1.5 : 1
Return Loss [dB] < -14.0
Passive Intermodulation (2x43 dBm Carrier) [dBc] < -150
Maximum Effective Power Per Port [W] 300 200
The specification follows NGMN recommendations on Base Station Antenna Standards. (BASTA)
MECHANICAL SPECIFICATIONS
Antenna Dimensions: Length, Width, Depth [mm] 2100 x 350 x 190
Weight (Without Clamp/With Clamp) [kg] 22/28
Connector Type 7-16 DIN female
Connector Quantity [EA] 10
Connector Position Bottom
Windload, Calculation [km/h] 150
Windload, Frontal [N] 591
Windload, Lateral [N] 234
Maximum Wind Speed [km/h] 200
Mechanical downtilt 0° ~ 8°
Storage temperature (ºC) -40 ± 60
Operating temperature (ºC) -40 ± 60
Radiator material Aluminum
Reflector material Aluminum
Radome Material ASA+PC,UV resistance
Radome Color [RAL] Gray
Lightning Protection DC ground
E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2020 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 1/3
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
December 8, 2021
E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2020 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 2/3
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
December 8, 2021
Model DuraRET-AISG
Protocols Compliant to AISG 2.0 / 3GPP
Input voltage range 10~ 30VDC (pin 6)
Power consumption < 1.5W (stand by); < 13W (motor activated)
2 x 8 pin connector according to IEC 60130-9
Connectors According to AISG Daisy chain in: male;
Daisy chain out: female
RS 485A/B (pin 5 / pin 3)
Power supply (pin 6)
Hardware interface
DC return (pin 7)
According to AISG
Adjustment time(full range) < 120 sec
Temperature range -40~ +70°C
Protection class IP55 (Installed)
Body: Aluminum
Housing material
Cover: Aluminum
Weight < 400g
Main dimensions (W 1 x D1 x H1) 75.0 × 105.0 × 40.0 mm
(Max. dimensions (W 2 x D2 x H2) (105.0× 143.5 × 64.0 mm)
E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2020 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice. ACE Technologies Corp. 3/3
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.