Professional Documents
Culture Documents
IVY County Brochure
IVY County Brochure
project that will be landmarked as IVY league in eco-friendliness With ample amount of
open area on offering, the project will not only boast of international standards of
PROJECT
GOLD RATED
PRE-CERTIFIED
swaying to the breeze invite you for a walk. Where joyous surroundings raise
Indoor Swimming Pool Fitness center with Spa, Gym, Steam, Jacuzzi
Yoga and Aerobics hall Basket Ball court Banquet Hall
Restaurant & Terrace Garden Coffee lounge
Table Tennis, Cricket Net Practice, lawn tennis Cards room, Reading room
Snooker & Billiard Room
Club lobby
Restaurant
Artistic image for illustrative purposes only
Artistic image for illustrative purposes only
Gymnasium
Type A
BALCONY
• 4 Bed Rooms 8565 X 1825
28'-1" X 6'-0"
• Drawing / Dining
• Kitchen BEDROOM
3350 X 4285
• 4 Toilets BALCONY 11'-0" X 14'-1"
3350 X 1825
• 4 Balconies 11'-0" X 6'-0"
TOILET
1835 X 2760
MASTER BEDROOM
6'-0" X 9'-1"
3350 X 5475
11'-0" X 18'-0"
BEDROOM
3360 X 3350
11'-0" X 11'-0"
DRAWING DINING
3650 X 5475 3450 X 3350
12'-0" X 18'-0" 11'-4" X 11'-0"
ENSUITE
1835 X 3320
TOILET BEDROOM 6'-0" X 10'-11"
1835 X 2460 3950 X 3360
6'-0" X 8'-0" KITCHEN
13'-0" X 11'-0"
4585 X 2460
15'-1" X 8'-1"
FOYER
1375 X 2650
BALCONY
SUPER AREA 4'-6" X 8'-8"
3050 X 1525
10'-0" X 5'-0"
2511 Sq. Ft.
BUILT-UP AREA UTILITY UTILITY BALCONY
ENTRANCE 2135 X 2135 2440,1525 X 3575
2091 Sq. Ft. (194.29 Sq. Mt.) 7'-0" X 7'-0" 8'-0",5'-0" X 11'-9"
BALCONY AREA
370 Sq. Ft. (34.42 Sq. Mt.)
Disclaimer: While every attempt has been made to ensure the accuracy of the plans shown, all measurements, positioning, fixtures, fittings and any other data shown are an approximate interpretation for illustrative purposes only and are not to scale. No responsibility is taken for any error, omission, mis-statement or use of
data shown. The company reserves the right to make changes in the plans, specifications, dimensions and elevations without any prior notice. • Super Area: (i) the entire area of the said flat enclosed by its periphery walls, including half of the area under common walls between two flats, and full area of walls in other case;
area under columns, cupboards, window projections and balconies; and (ii) proportionate share of service areas to be utilized for common use and facilities, including but not limited to lobbies, staircase, circulating areas, lifts, shafts, passage, corridors, stilts, lift machine room, area for water supply arrangement, maintenance
office, security/fire control rooms etc. • Built up Area : Built up area, as per CREDAI definition, shall mean the total Polyline(P.Line) area measured on the outer line of the unit including balconies and /or terrace with or without roof. The outer walls which are shared with another unit shall be computed at 50% Remaining Outer
walls are computed at 100%. • Carpet Area: Carpet Area is the net usable floor area of an apartment, excluding the area covered by the external walls, areas under services shafts exclusive balcony or verandah area and exclusive open terrace area, but includes the area covered by the internal partition walls of the apartment.”
• 1 sq. ft. = 0.0929 sq. mt., 1 sq. mt. = 10.764 sq. ft, 1 ft. = 0.305 mt and 1 mt = 3.281 ft. The above shown plan is of typical unit and is used for reference or indicative purpose only. However balconies and other areas may vary as per the actual construction or as per individual unit/floor plan.
Type B
BALCONY
8565 X 1825
28'-1" X 6'-0"
• 3 Bed Rooms
• Drawing / Dining
• Kitchen
• 3 Toilets BALCONY
3200 X 1825
10'-6" X 6'-0"
• 4 Balconies
• Utility Room with Toilet DRESS
1835 X 1800
6'-0" X 5'-11"
TOILET
1835 X 2760
MASTER BEDROOM 6'-0" X 9'-1" BEDROOM
3350 X 5085 3350 X 3895
11'-0" X 16'-8" 11'-0" X 12'-9"
PASSAGE
TOILET 1400 X 1100
1835 X 2085 4'-7" X 3'-7"
6'-0" X 6'-10"
DRAWING
3500 X 5085
11'-6" X 16'-8"
DINING
3450 X 3350
11'-4" X 11'-0"
TOILET
1835 X 3320
6'-0" X 10'-11"
BEDROOM FOYER
3950 X 3360 1225 X 1825
13'-0" X 11'-0" KITCHEN 4'-0" X 6'-0"
4285 X 2460
14'-1" X 8'-1"
BALCONY
SUPER AREA 2900 X 1525
9'-6" X 5'-0"
2124 Sq. Ft. ENTRANCE
UTILITY BALCONY
BUILT-UP AREA 1525 X 3825
1779 Sq. Ft. (165.31 Sq. Mt.) 5'-0" X 12'-7"
BEDROOM
3350 X 4645 DRESS
11'-0" X 15'-3" 1835 X 1510
6'-0" X 4'-11"
BEDROOM
3200 X 3510
10'-6" X 11'-6"
PASSAGE BEDROOM
2085 X 1100 3350 X 4010
6'-10" X 3'-7" 11'-0" X 13'-2"
DRAWING DINING
3350 X 4785 2750 X 3050
11'-0" X 15'-8" 9'-0" X 10'-0"
FOYER
1225 X 1000
SUPER AREA 4'-0" X 3'-3" TOILET
BALCONY AREA
213 Sq. Ft. (19.80 Sq. Mt. )
Disclaimer: While every attempt has been made to ensure the accuracy of the plans shown, all measurements, positioning, fixtures, fittings and any other data shown are an approximate interpretation for illustrative purposes only and are not to scale. No responsibility is taken for any error, omission, mis-statement or use of
data shown. The company reserves the right to make changes in the plans, specifications, dimensions and elevations without any prior notice. • Super Area: (i) the entire area of the said flat enclosed by its periphery walls, including half of the area under common walls between two flats, and full area of walls in other case;
area under columns, cupboards, window projections and balconies; and (ii) proportionate share of service areas to be utilized for common use and facilities, including but not limited to lobbies, staircase, circulating areas, lifts, shafts, passage, corridors, stilts, lift machine room, area for water supply arrangement, maintenance
office, security/fire control rooms etc. • Built up Area : Built up area, as per CREDAI definition, shall mean the total Polyline(P.Line) area measured on the outer line of the unit including balconies and /or terrace with or without roof. The outer walls which are shared with another unit shall be computed at 50% Remaining Outer
walls are computed at 100%. • Carpet Area: Carpet Area is the net usable floor area of an apartment, excluding the area covered by the external walls, areas under services shafts exclusive balcony or verandah area and exclusive open terrace area, but includes the area covered by the internal partition walls of the apartment.”
• 1 sq. ft. = 0.0929 sq. mt., 1 sq. mt. = 10.764 sq. ft, 1 ft. = 0.305 mt and 1 mt = 3.281 ft. The above shown plan is of typical unit and is used for reference or indicative purpose only. However balconies and other areas may vary as per the actual construction or as per individual unit/floor plan.
O
T
H
E
R
'S
P
R
O
P
E
R
T
Y
LEGENDS
Disclaimer: While every attempt has been made to ensure the accuracy of the plans shown, all measurements, positioning, fixtures, fittings and any other data shown are an approximate interpretation for illustrative purposes only and are not to scale. No responsibility is taken for any error, omission, mis-statement or use of
data shown. The company reserves the right to make changes in the plans, specifications, dimensions and elevations without any prior notice. • Super Area: (i) the entire area of the said flat enclosed by its periphery walls, including half of the area under common walls between two flats, and full area of walls in other case;
area under columns, cupboards, window projections and balconies; and (ii) proportionate share of service areas to be utilized for common use and facilities, including but not limited to lobbies, staircase, circulating areas, lifts, shafts, passage, corridors, stilts, lift machine room, area for water supply arrangement, maintenance
office, security/fire control rooms etc. • Built up Area : Built up area, as per CREDAI definition, shall mean the total Polyline(P.Line) area measured on the outer line of the unit including balconies and /or terrace with or without roof. The outer walls which are shared with another unit shall be computed at 50% Remaining Outer
walls are computed at 100%. • Carpet Area: Carpet Area is the net usable floor area of an apartment, excluding the area covered by the external walls, areas under services shafts exclusive balcony or verandah area and exclusive open terrace area, but includes the area covered by the internal partition walls of the apartment.”
• 1 sq. ft. = 0.0929 sq. mt., 1 sq. mt. = 10.764 sq. ft, 1 ft. = 0.305 mt and 1 mt = 3.281 ft. The above shown plan is of typical unit and is used for reference or indicative purpose only. However balconies and other areas may vary as per the actual construction or as per individual unit/floor plan.
specifications
Disclaimer: While every attempt has been made to ensure the accuracy of the plans shown, all measurements, positioning, fixtures, fittings and any other data shown are an approximate interpretation for illustrative purposes only and are not to scale. No responsibility is taken for any error, omission, mis-statement or use of
data shown. The company reserves the right to make changes in the plans, specifications, dimensions and elevations without any prior notice. • Super Area: (i) the entire area of the said flat enclosed by its periphery walls, including half of the area under common walls between two flats, and full area of walls in other case;
area under columns, cupboards, window projections and balconies; and (ii) proportionate share of service areas to be utilized for common use and facilities, including but not limited to lobbies, staircase, circulating areas, lifts, shafts, passage, corridors, stilts, lift machine room, area for water supply arrangement, maintenance
office, security/fire control rooms etc. • Built up Area : Built up area, as per CREDAI definition, shall mean the total Polyline(P.Line) area measured on the outer line of the unit including balconies and /or terrace with or without roof. The outer walls which are shared with another unit shall be computed at 50% Remaining Outer
walls are computed at 100%. • Carpet Area: Carpet Area is the net usable floor area of an apartment, excluding the area covered by the external walls, areas under services shafts exclusive balcony or verandah area and exclusive open terrace area, but includes the area covered by the internal partition walls of the apartment.”
• 1 sq. ft. = 0.0929 sq. mt., 1 sq. mt. = 10.764 sq. ft, 1 ft. = 0.305 mt and 1 mt = 3.281 ft. The above shown plan is of typical unit and is used for reference or indicative purpose only. However balconies and other areas may vary as per the actual construction or as per individual unit/floor plan.
DOORS & WINDOWS WALL FINISH RAILING
Internal : Designer flush doors External Finish : Most Modern and Balcony : Stainless Steel /RCC/
in polish/duco paint Elegant Permanent Brickwork/
fixed in hardwood Finish with High Blockwork
External : UPVC Sliding doors & Quality Texture Staircase : Mild Steel
windows Paint
Internal Finish : All internal walls of
the room & Drawing
Dining will be
painted using O.B.D.
4 &5 B H K A PA RT M E N T S
S E C TO R - 1 07, N O I DA