Professional Documents
Culture Documents
Moon Light: The Source - Warranty
Moon Light: The Source - Warranty
Moon Light: The Source - Warranty
Instruction Manual
INCLUDED WARNINGS
• Moon light • Moon light is for indoor use only
• 3-piece wood base • Light is NOT waterproof–please use in a clean and dry place
• 99cm (3.25ft.) USB cable • Protect your light and USB cable from sharp or potentially damaging
• Instruction manual objects to avoid damage to the wire’s insulation
• DO NOT use outdoors
FEATURES • DO NOT use if product is damaged
• LED light shines warm or cool • DO NOT expose to direct heat, flame or immerse in water
• Touch the metal ring to switch between a bright, white light and a • DO NOT drop the light, or hit it forcefully
warm, yellow glow • DO NOT attempt to remove the bulbs–LEDs cannot be replaced
• Plug your moon light into a wall adapter (sold separately) with the
included USB cable to use it as a night light
• Shatter-proof plastic makes this light perfect for kids! CAN ICES-005 (B) / NMB-005 (B)
GETTING STARTED
BASE ASSEMBLY
Collect the three base pieces and assemble them following the diagram
below.
CHARGING
Please fully charge the moon light before first use.
1. Use the included USB cable to connect the moon light to to a wall
adapter or alternative power source (sold separately).
2. The red LED will turn ON while the moon light is charging.
3. The red LED will turn OFF once charging is complete.
OPERATING INSTRUCTIONS
1. Touch the metal ring at the base of the moon light to turn light
ON and OFF.
2. Touch the metal ring to cycle through the colour settings–bright
white, warm yellow and OFF.
3. Press and hold the metal ring to adjust the brightness of the light.
SPECIFICATION
Power: USB Charging cable/PC 5.0V
Battery capacity: 3.7v/450mAh
Charging Time: 1-3 hours
Operation Time: 6-7 hours