Professional Documents
Culture Documents
8.4 - VR Moto
8.4 - VR Moto
Pag. 3382
CATALOGUE
I. APPEARANCE INTRODUCTION____________________________________3
II. NOTICE_________________________________________________________ 4
Equipment Maintenance______________________________________________ 4
Warning____________________________________________________________ 5
V. OPERATING INSTRUCTIONS______________________________________ 9
How To Shutdown____________________________________________________ 9
About Computer____________________________________________________ 14
ATTACHMENT____________________________________________________ 18
2 / 20
Pag. 3383
I. Appearance Introduction
Picture1 VR Moto
3 / 20
Pag. 3384
II. Notice
Equipment Maintenance
1. Machine have to shut down in correct process. Please read the manual about
shut down process accordingly. It means that to turn off the computer switch first,
then turn off the main switch after the computer switch light off. Incorrect shut down
process will lead to system damage or machine damage, please pay more attention on
it.
2. If machine works continuously 10 hours per day, we suggest after machine
works 6-8 hours can shut down for 15-20 minutes.
3. In order to extend the VR glasses lifetime, please do not cover the VR glasses
with box or don’t put the VR glasses under sun directly. High intensity sunlight will
burn the convex lens inside VR glasses.
. It is recommended to keep the site constant temperature in 16-28℃, under this
temperature, can make sure site dry and machine can save power.
5. Please inspect and make sure the foot screw fixed on the ground safely every
week.
6. Please keep clean the appearance of machine every week, but do not clean
while machine is running.
4 / 20
Pag. 3385
Warning
1. If any problems occur, please stop the machine at once and then turn off power,
finally pull out the plug. Please contact Movie Power After Sales Team to get solution
as soon as possible, if insist to operate the machine without solving the problem, may
cause fire or accident.
2. Forbid to loosen the seats belt and leave the seat when machine is running. It
will lead to safety problem or cause accident.
3. Please don’t disassemble, replace or modify our machine or its configuration
without the authorization of our technical team. To avoid that incorrect operation lead
to damage the product, or threaten the personal safety.
. Please do not use any fuses or components other than those specified by our
company.
5. Please do not operating the machine under thunderstorm condition.
6. Please turn off the electric power when the equipment not working. And do not
touch the electric power with wet hand to avoid the electric shock or short circuit
accident.
7. Keep machine power line away from flammable and explosive, corrosive
materials. Avoid to cause the fire disaster.
8. Please put the machine in the dry and clean place. Avoid to cause short circuit
accident and fire disaster.
9. Keep the power line away from the heating device. Do not twist, modify, or
pull the power wires. Do not place anything on it or hook the power wires on other
products or the wall. Do not do anything that might damage the power wires.
5 / 20
Pag. 3386
III. Technical Parameters
VR Motor
Type VR
weight 250kg
6 / 20
Pag. 3387
IV. Installation Instructions
This machine is for indoor use, not suggested to place outside, and please be
attention to below points while placing at location:
.1 Avoid placing in damp places.
.2 Avoid placing near Flammable, Volatile drugs and Dangerous substances
around.
.3 Avoid location with direct sunlight.
3. . Avoid location on Inclined plane.
.5 Avoid placing near Emergency Exits, Fire Extinguishers or other
Fire Fighting apparatus.
.6 Avoid placing in vibrates violently.
.7 Avoid placing in dusty location.
.8 Attention to the safety distance of the machine (At least keep people or other
things 1.0 meter away from the front, back, left and right of the machine, and the
space height should be 3.0 meter above).
.9 When installing the machine on site, please use the wrench turn the ground
bolt down firmly.
Connect Micro USB port (picture 2) to the tablet's Micro USB port, the network port
7 / 20
Pag. 3388
Introduce the function of the socket
Picture3 socket a
Picture4 socket b
8 / 20
Pag. 3389
V. Operating Instructions
How To Start Up
VR moto: When the main switch is set to "1" on, the computer will
automatically start up, no need to press the "computer switch" button. Wait 1 minute
to complete the boot.
Table: Press table’s power switch (on table corner) 10 second. Wait 1 minute to
complete the boot.
How To Shutdown
VR moto: Must turn off the “PC switch” first, wait for the computer switch light
off, then turn off the power switch "0" position, and finally unplug the power cord.
Table: Click “SETTING” then click “Shut down”, table will shutdown.
Let player sit on the cushion of motorcycle and put on the "VR glasses", adjust
the “VR glasses” to a comfortable position. Hold the motorcycle "VR glasses" with
both hands and be ready to start the game.
Before start, operator click the "SETTING" icon.
Check if M161 pc is connected. If there is no connection, click the "Search
Host" icon and the online bar will display "Yes" icon.
9 / 20
Pag. 3390
Picture 5 main interface
After finish, click back icon to back to VR-Power Player interface,Click on the
"Play" button and "Confirm Play" button in turn, and the game begins to play.
If you need to stop the game, you can press the Stop Playing button.
10 / 20
Pag. 3391
Picture 7 Operational description (1)
motorcycle forward
If you need to set the price for ticket, you can enter the account system, by click
on "Setting", then "Account Management", enter password is: 123 5678.
11 / 20
Pag. 3392
Picture 9 Accounting Management
Set Password:You can enter Accounting Management then set password, click
save button to confirm change.
Game price : You can set the price for each movie ticket, click save button to
confirm change.
12 / 20
Pag. 3393
Picture 11 set Email
(If you have coin function)If you need to set coin type, you can click “Payment
Settings”. And need to open the console computer back cover, pick up the coin
machine "replace" to take the "mother coin" out, put in the type of coin you want.
13 / 20
Pag. 3394
Picture13 Payment Settings
Set the number of: In here, you can set any number of coins.
Support coin: Must click here have the function of coin
About Computer
2. How to solve if the computer is not working well or can’t enter the windows
successfully?
A: (Note! This step must approval from Movie Power after Sales engineer
before you take action.)
Take out the computer and then press the buckle of the memory to take off the
14 / 20
Pag. 3395
memory bank (see attachment pic). Use the eraser to clean the “golden finger” of the
memory bank (see attachment pic). Put it back after clean it, and make sure all the
wires connect well like before. If you could turn on the computer, it is ok, if not, you
need to replace the DDR G memory bank.
3. How to do if the computer could not turn on after replacing the memory bank?
A: The motherboard maybe has already burned out, because too much dust can
cause it short circuit. You could take picture and then connect our after sales engineer
for replacement.
15 / 20
Pag. 3396
Picture15 control circuit board
F: 12V Input, if voltage bigger than 12V, may burn out motion circuit board
G: Coin port, the coin box signal line and power line are connected here
H: Throttle lever, control the motorcycle to accelerate
I: right button, in game you can fire a gun
J: 58 signal line, as the control board output signal to computer
K: Direction, it can control the motorcycle to move left and right
1. When Servo driver shows E20, how to do?
A: When servo driver shows E20, please contact Movie Power After Sale
technician.
2. When Servo driver shows E28, how to do?
(Note! This step must approval from Movie Power After Sales engineer before
you take action.)
A: Open the cover of the servo drive display digital tube, press the "AXIS"
button to switch AXIS A, B and C. AXIS A, B and C correspond to 3, 2 and 1 electric
cylinders. While servo driver shows E28, please adjust below sensor to the bottom of
electric cylinder, then move it up until sensor red light is on. Then move more 2cm,
fixed sensor to finish the step.
16 / 20
Pag. 3397
Picture16 display digital tube
Connect the network cable to “WAN” port on router, then click “SETTING” to
enter “Account Management”, click “WINDOWS DeskTop” to back to computer
desktop. Open “Teamview12” , take a picture for Teamview12 ID and password and
send to our After Sales.
17 / 20
Pag. 3398
Attachment
Picture 19
Memory bank, the golden parts is called “Golden Finger” (Coherent Memory Filter)
Picture 20
18 / 20
Pag. 3399
Picture 21
19 / 20
Pag. 3400
Electrical schematic d
20 / 20
Pag. 3401