Professional Documents
Culture Documents
Doors and Windows
Doors and Windows
08110
Doors and Windows
steel doors & frames
08120 aluminum doors & frames
08210 wood doors
08220 plastic doors
08330 coiling doors & grilles
08341 cold storage doors
08350 folding doors & grilles
08400 entrances & storefornts
08460 automatic entrance doors
08510 steel windows
08520 aluminum windows
08550 wood windows
08560 plastic windows
08
08600 skylights
08710 door hardware
08720 weatherstripping & seals
08740 electro-mechanical hardware
08810 glass
08812 decorative glazing
08840 plastic glazing
08900 glazied curtain walls
08
08
08200 wood & plastic doors & frames
notes:
Main Office: Suite 201 LGI Bldg.,Ortigas Avenue Greenhills San Juan, MM 1502 ph
Tel.: 632-725-0661 * 724-8070 * 724-8072 * 724-8032 Fax: 632-722-0729
Sales & Plant Office: UDC Compound, Malhacan, Meycauayan, Bulacan, 3020 ph
Tel.: 063-44-228-3774 * 840-7150 * 228-3814 * 840-9407 Fax: 063-44-695-3800
E-mail: pateco@pacific.net.ph
There are so many manufactureres of PVC windows & doors
claiming to be of high quality.......
BUT ONLY
EMERALD
SHEERFRAME
CARRIES THE TRADITION OF EXCELLENCE AND
SUPERIORITY
08
DURABILITY
WEATHERABILITY
elegance
......COMBINING SHEER ELEGANCE
& SHEER STRENGTH
08500 windows
and treatment with shading Products that are in charge of solar radiation have been
devices have an impact on the manufactured by companies since the last 20 years. Buildings mainly use
comfort of occupants and the glass that absorb heat and reflective coatings on glass, but coatings
operation of mechanical systems. reducing the entry of ultraviolet radiation are slowly gaining popularity.
Glare, overheating and cooling Glazing is used as an energy filter: whether it be solar energy, radiation
effects, draughts and outside noise energy from objects and people or energy from sound waves.
affect the physical comfort of Figure 2. Discontinuity of functions at wall- In certain instances, windows may have to be retrofitted rather than
occupants, while their psychological window interface. replaced. In order to improve their thermal performance, the applica-
comfort can also be affected by communication — or lack of it — with tion of adhesive films on the existing glass is important to control solar
the outside world. How much glazing, what type and where to place it to heat gains and reduce internal heat losses.
Advantages
08
Gold System Eurodur SF2 System
Types
Arch Windows
Awning Windows
Fixed Glazed Windows
Tilt & Turn Windows
Casement Windows & Doors
KOMALIT-Z Sliding Windows & Doors
Tilt & Slide Doors
Designed Especially For Tropical Climate Slide & Fold Doors
Roll-up Screens
KOMALIT
OMALIT-Z-Z
-Z,, a PVC blend of the highest impact
resistance grade, especially for tropical climate
climate.
This material compound performs to worldwide
standards for strength, durability, heat stability, color
retention and termite resistance.
08500 windows
#1 In Europe and Asia
notes:
Rain Penetration
Rain penetration can be controlled by applying the rain screen
principle to the interface of glazing-sash and sash-frame components.
The rain screen
08
since vapour diffusion in most (separate frames and sashes for inner and outer layers). They certainly
window materials (aluminum, steel, have to be as airtight as possible: usually fixed windows provide much
glass, PVC, protected wood) is better sound transmission control than operable windows.
very small. For example, in
unsealed double glazing, exfiltrated Entry of Insects
humid air can condense between Screens must be added to the window to prevent the entry of
the panes of glass (Figure 6). A insects. The fitting of the screen is critical to prevent insects from
better tightening of the existing getting in. Observation and common sense will indicate the type of
inside sash or, as a default, a slight screens that do not let bugs crawl around and are easy to remove and
opening of the exterior Figure 6. Condensation between panes of reinstall for cleaning.
unsealed glazing.
Ease of Operation elastomeric membranes used as wall air barriers in high rise construction
also make the interface with the window frame airtight. By extension,
The ease of operation of windows sometimes conflicts with
strips of these membranes join other materials acting as wall air barriers
the requirement of air and sound tightness. The mechanism of operation
to the window frame. Sprayed-on polyurethane foam (PUF) insulation is
of the window and its hardware, as well as the thermal and moisture
also used because it can provide both thermal insulation and airtightness;
movement of the sash and frame materials, affect the ‘operability’ of
however, the movement PUP can accommodate, its adherence to
the window.
various substrates and the potential transfer of the vertical loads above
the window in case of wall settlement have to be addressed.
08
used to seal it?
sheet.
The rain screen principle can also be applied at the interface
Heat-strengthened glass receives a heat treatment similar to that between walls and windows in order to achieve low maintenance of the
used for fully tempered glass but the temperature and rates of cooling joints and better performance. The structural connection between the
produce a lower level of surface compression. It is suitable for applica- window and the wall is vital to the proper transfer of wind and other
tions where annealed glass could be used but where additional strength loads to the structure. Most often, the head of the window is not
and thermal endurance are desirable. attached in any way to the header; this tends to increase the potential
displacement of the window frame relative to the rough opening. The
Wired glass has a wire mesh embedded in the molten glass during the locations of anchor points also affect the expansion and contraction of
manufacturing process. Its main advantage is provided by the wire, which the joint and the selection of the sealing materials.
holds the pieces of glass together after fracture has occurred. The installation of replacement windows in existing construc-
Wired glass is used in fire separations, for burglar protection and where tion is probably more complex than installing windows in new construc-
protection from flying glass is required in high risk areas. tion because one has to deal with what is there, and one does not always
know what is there before decisions are made. For example, the wall-
window interface should be airtight and this implies that a plane of air
Laminated glass comprises two or more sheets bonded together with
tightness exists in the wall itself, which is unlikely in most older
intermediate layers of plastic. Laminated glass is no more resistant to buildings. What do you join the window frame to? This difficulty
fracture than monolithic glass, but in case of fracture, the plastic probably explains why so many retrofitted buildings have been ‘face
interlayer holds the fragments in place. A combination of glass and inter sealed’ on the outside without any type of inside sealing; new windows
layers can be designed for such uses as sound control, solar heating may well suffer from rain penetration because of that compromise. In
control, bullet-resistance and blast-resistance. existing buildings (commercial, residential and institutional) where wood
windows are replaced, the decision to keep or remove the existing wood
frame, and to insert the new window
Fire Propagation frame in the rough wall opening or in
Glazing is measured as an insubstantial point for the propaga- the existing frame is important . Often
tion of fire to other storeys or other buildings. The Philippine govern- the new frame is inserted into the old
one, and everything is covered on the
ment limits the area of windows according to the occupancy of the
outside with an aluminum sheeting and
space, the distance from the lot line, or the limiting distance and the
face sealed. This means the rain screen
geometry of the facade.
principle is not applied and the size of
the gap around the window has doubled,
resulting in increased air leakage at the
What Are the Requirements for the Wall- wall window interface.
Window Interface? A discernment and admira-
windows
The detailing of the wall-window interface is critical to the tion of what has to be achieved, of the
continuity of functions over the enclosure. More often than not, these sequence of construction, and of the
details are only given importance when it is time to install the actual way to design the details so that it will
windows. The little ‘gap’ between the rough opening and the window be possible to build on are of utmost
frame can threaten the performance of the whole system. Problems of importance. To make sure the window
rain penetration, air infiltration or efflorescence on masonry can relate carries out all its intended functions, a
to a lack of continuity of the functions of the envelope around windows replica can initially be tested in the
(rather than through them). The plane of air tightness in the window laboratory to evaluate if it can work,
Figure 9. Typical window
and in the walls must be clearly identified by the designers so that the and on location to validate whether it is replacement in houses: no rain
two appropriate components get joined together properly. Adhesive being built to the specifications. screen, no airtightness.
your solution
in furniture fittings, architectural
hardware and electronic locking system
08
08700 hardware
Hardware notes:
Technology
GLASS FIN
The glass facade panels are suspended from a beam or slab by means
of concealed clamps. Lateral support is provided by tempered glass
fins, which are independently clamped to the building structure. For
high-span façade, the fins are installed in sections,held together by
stainless steel sliced joints.
TRUSS
S E RUT CUR T
These offer many design possibilities, and can be selected from a wide range of sizes
and shape, made of stainless or coated steel, to blend with other internal or external
features.
08
CABLE
The cable system is formed from two single stainless steel cable, tied to the building using
turnbuckles and fork-ends. The system maintain the lateral support under wind load. The integrity
and stability of the glazed panels are ensured by the cable, arranged horizontally and vertically,
fixed to the structure.
notes:
Mkna 941-2297
MGS Woodworkd Mand. 718-1885
Citi Projects QC 924-5522
MSD Wood Products Val. 983-9456
EBHea Furnishings Inc. Mand. 531-8071
Nu-Crest Corp. QC 635-0677
Hi-Class Venetian Blinds & Design Center Manila 244-7521
PACIFIC TIMBER EXPORT CORP. SJ 724-8070
Jassen Décor Enterprises SJ 727-1883
R & M Roque Sash Works Manila 740-8191
Mega Blinds Center KC 363-5197
Doors & Windows
08 location contact no. location contact no.
08
COMGLASCO CORP. KC 330-6372
Concepcion Glass & Alum. Supply LP 871-1435 08550 wood windows
Consolidated Glazing Corp. Pasig 671-2377 Acts Woodworks QC 414-3099
Glassworks Industries, Inc. Mand. 724-9115 Canadian Asian Enterprises (Andersen) SJ 722-6671
Glass World Inc. QC 921-4946 MATIMCO INCORPORATED QC 366-7009
Hi-Grade Glass & Aluminum Supplies Inc. Pasig 655-3994 Cebu (032)346-1080
Neltex Development Co., Inc. (Vistawall) Makati 812-5431 Rovitron Enterprises (Hurd) Makati 833-9320
Robins Home Depot Inc. (Tesa) QC 416-4921 Kraut Art Glass PC 521-6488
Tamsons Enterprises, Inc. Manila 242-1384 Pacific Glass Corp. Mand. 631-8221
UNITED EXPERTS INTERNATIONAL, INC. (EPCO) Pasig 632-0650 RAR Glass Art Specialtist Makati 889-2463
WITCO International Trading Corp. Manila 562-5926 Seagull Glass Works Inc. Makati 897-4036
SGA International Inc. Makati 844-8177
Chain Glass Enterprises Inc. Manila 781-6791 COMGLASCO CORP. Makati 894-3823
COMGLASCO CORP. KC 330-6372
GlassTemp Industries Corp. QC 372-3896 Concepcion Glass & Alum. Supply LP 871-1435
GlassWorks Industries Inc. Mand. 724-9115 Consolidated Glazing Corp. (GE) Pasig 671-2377
Glassworks Industries, Inc. Mand. 724-9115
Hyatt Industrial Manufacturing Corp. (Visteon) Mand. 727-0661 Glass World Inc. QC 921-4946
Pacific Glass Corp. Mand. 631-8221 Neltex Development Co., Inc. (Vistawall) Makati 812-5431
Republic-Asahi Glass Corp. Pasig 641-1981
Solid Glass & Aluminum Corp.. QC 714-3765 PAGCS QC 913-8315
Sun Industrial Corp. KC 367-8815 Republic-Asahi Glass Corp. Pasig 641-1981
UNITED EXPERTS INTERNATIONAL, INC. Pasig 632-0650
Unicorn Safety Glass Inc. KC 364-1604 632-0687
UNITED EXPERTS INTERNATIONAL, INC. Pasig 632-0650
632-0687 be seen and get specsified !