Professional Documents
Culture Documents
Kathryn Blouse: Get All-Day Elegance With The
Kathryn Blouse: Get All-Day Elegance With The
ESSENTIALS
Kathryn
Blouse
Fabric, 1.5m (130cm)
Fusible interfacing, 25cm
Buttons, 15mm, eight
SUGGESTED FABRICS
Lightweight wovens, such
as cotton poplin, chambray
and seersucker From pretty polka dots to statement stripes, 2021 is the year of the
SIZES pattern. Always keen to embrace a trend, we decided to use a gingham
8-24 fabric when bringing this gorgeous design to life. Featuring a flattering
CUTTING GUIDE
tie belt that will cinch you in at the waist and statement armholes that
promise to keep you cool, this offering from Posner & Posner won’t just
Get started
Back: cut one on the fold
Front: cut two on the fold be a joy to wear, it will also act as a masterclass in stitching buttonholes,
Back neck facing: cut one on working with bias strips, and creating hems.
the fold from fabric and one on
the fold from interfacing
Front neck facing: cut two on
the fold from fabric and two on front along the fold line towards the stitch in place and press. Apply
1
Download the templates from
the fold from interfacing sewmag.co.uk, then print and wrong side to create the button fusible interfacing to the wrong
Casing: cut one on the fold follow the cutting guide. Snip band. Press the fold, but don’t stitch. sides of the front and back neck
Tie belt: cut two on the fold two pieces of fusible interfacing, facing pieces. Pin the facings right
2
Press a 5mm turning on to the
Bias strips: cut two, 2.5cm 4.5cm wide and the same length as wrong side of both the long sides together at the shoulder edge
x 46cm and stitch. Trim the seam and
https://vk.com/sew_room
the centre front, then apply to the edges of the casing. Repeat
1cm seam allowance centre front on the wrong side. Press this process at each of the short neaten the edge. Press the seam
used throughout, unless under a narrow turning along the ends of the casing and stitch close open. Neaten around the outside
otherwise stated. raw edge of the front band and to the edge. Pin the casing in place edge of the facing by turning under
stitch close to the edge. Fold each along the lines marked on the back a small hem or overlocking.
5
of the blouse and stitch close to the With right sides together, pin
edge at the top and bottom of the the facing to the neck edge of
3
Press a 5mm turning on the
long edges of the bias strips. allowance. Snip around the curve
Pin the unpressed edge of the and trim the seam. Press the facing
bias strips to each armhole, right away from the neck edge and fold
sides together, and stitch in place towards the wrong side. Trim any
with a 5mm seam allowance. Press excess facing at the front edge so
the bias strip away from the that the front band lies flat. The
armhole. With right sides together, facing can be understitched to help
pin the back and front at the side achieve a neat, folded edge around
seam, leaving a gap at the position the neckline. Secure the facing with
marked for the casing. Sew the side slipstitches at the shoulder seams
seam from the hem to the bottom of and hand-stitch the top of the front
the casing and the top of the casing band where it meets the facing.
to the armhole, stitching through
6
Fold the front band back on
the ends of the bias strip. Trim the itself at the hem edge so that
seam and any extra bias strip, then the right sides are together
neaten the edges and press the side and stitch across the bottom of the
seam towards the back. Fold in the band 2cm from the bottom of the
raw edges of the side seam at the blouse hem edge. Trim any excess
SEW MAGAZINE 32
If you decide to work with gap for the casing and slip-stitch fabric and fold the band back into
a gingham fabric, you may need to secure. position, then press. Press a 1cm
extra material for lining up
4
Fold the bias strip to the wide hem around the bottom of the
the pattern wrong side of the armhole so blouse, turn under again and press,
that the pressed edge meets Stitch the hem in place. Make
the stitching line. Hand or machine buttonholes at the marked positions
20
sewmag.co.uk
DRESSMAKING
7
DOWNLOAD
and stitch the short ends of sewmag.co.uk
the tie belt together to make /templates
one long belt. Press the seam open.
Fold the belt in half lengthways,
then pin and sew, leaving a gap for Our exclusive
turning. Stitch diagonally across patterns are now
available to
the ends of the belt. Turn the belt to download in sizes
the right side through the gap in
the stitching. Press along the edge
and push out the points at the
8-24
diagonal end of the belt. Sew the
gap closed. Thread the belt from
the front side seam, through the
casing and round to the other side
of the front, then adjust to fit.
https://vk.com/sew_room
21
sewmag.co.uk
ISSUE 148 APRIL 2021
PATTERN
DOWNLOAD
CUT OUT & KEEP
KATHRYN BLOUSE
Designer: Posner & Posner
Magazine page: 20
https://vk.com/sew_room
sewmag.co.uk
PATTERN LAYOUT
1 2 3 4 5
sew
KATHRYN BLOUSE
TEST SQUARE TIE BELT
10cm CUT TWO ON THE FOLD
sew
KATHRYN BLOUSE
BACK NECK FACING
CUTTING GUIDE
CUT ONE ON THE FOLD
FROM FABRIC AND ONE ON THE
FOLD FROM FUSIBLE INTERFACING
6 7 8 9 10
sew
KATHRYN BLOUSE
CASING
CUT ONE ON THE FOLD
IN FABRIC
1 2 sew
KATHRYN BLOUSE
FRONT NECK FACING
CUT TWO FROM FABRIC AND
TWO FROM FUSIBLE INTERFACING
14
FOLD OF FABRIC
11 12 13 15
5 sew
KATHRYN BLOUSE
BACK
CUT ONE ON THE FOLD
FROM FABRIC
3
16 17 18
https://vk.com/sew_room 19 20
4 sew
KATHRYN BLOUSE
Stitching line for casing
FRONT
CUT TWO
belt
sewmag.co.uk
1 2
TEST SQUARE
10cm
https://vk.com/sew_room
sewmag.co.uk
2 3
https://vk.com/sew_room
F
FO
sewmag.co.uk
3 4
https://vk.com/sew_room
sew
KATHRYN BLOUSE
BACK NECK FACING
CUT ONE ON THE FOLD
FROM FABRIC AND ONE ON THE
FOLD FROM FUSIBLE INTERFACING
sewmag.co.uk
4 5
sew
KATHRYN BLOUSE
TIE BELT
CUT TWO ON THE FOLD
https://vk.com/sew_room
sewmag.co.uk
5
https://vk.com/sew_room
sewmag.co.uk
6 7
sew
https://vk.com/sew_room
KATHRYN BLOUSE
FRONT NECK FACING
CUT TWO FROM FABRIC AND
TWO FROM FUSIBLE INTERFACING
sewmag.co.uk
7 8
https://vk.com/sew_room
sewmag.co.uk
8 9
https://vk.com/sew_room
sewmag.co.uk
9 1
sew
KATHRYN BLOUSE
CASING
CUT ONE ON THE FOLD
IN FABRIC
https://vk.com/sew_room
sewmag.co.uk
10
https://vk.com/sew_room
sewmag.co.uk
11 1
https://vk.com/sew_room
sewmag.co.uk
12 1
https://vk.com/sew_room
sewmag.co.uk
13 1
https://vk.com/sew_room
sewmag.co.uk
14 1
CU
https://vk.com/sew_room
sewmag.co.uk
15
sew
KATHRYN BLOUSE
BACK
CUT ONE ON THE FOLD
FROM FABRIC
https://vk.com/sew_room
sewmag.co.uk
16 1
for belt
stitched
https://vk.com/sew_room
Leave un
sewmag.co.uk
17 1
sew
KATHRYN BLOUSE
FRONT
CUT TWO
elt
hed for b
https://vk.com/sew_room
sewmag.co.uk
18 1
https://vk.com/sew_room
sewmag.co.uk
19 2
Stitching line for casing
https://vk.com/sew_room
sewmag.co.uk
20
https://vk.com/sew_room
sewmag.co.uk
21 2
https://vk.com/sew_room
sewmag.co.uk
22 2
https://vk.com/sew_room
sewmag.co.uk
23 2
https://vk.com/sew_room
sewmag.co.uk
24 2
https://vk.com/sew_room
sewmag.co.uk
25
Size 8
Size 10
https://vk.com/sew_room
Size 12
Size 14
Size 16
Size 18
Size 20
Size 22
Size 24
sewmag.co.uk