QI. A shaft transmits 100 KW of power at 180 rpm. Take the allowable stress as 120
MPa and determine the diameter of a solid shafi to transmit the required power. If the
total angle of twist is limited to 2° in 4 m of the shaft length, what will be the diameter
of solid shaft on the basis of maximum twist angle? Take G=80 GPa.
2. At a point in a stressed object, there are mutually perpendicular normal stresses of
magnitude 90 MN/m* (tensile) and 30 MN/m? (Compressive) are acting. Besides these
the shear stress of 30 MN/m? is also present. Using Mohr’s circle determine the
principal stresses, direction of principal planes and the maximum shear stress
magnitude,
Q3. A hollow circular column of steel of outer diameter 180 mm and thickness 4 mm
has a length of 4 m, with both ends fixed. Find the Euler’s ical load if E=200 GPa.
If the yield stress is 290 MPa determine the length below which Euler’s formula can
not be applied.
Q4. An object is subjected to the following stresses in perpendicular directions 4,=
120 MPa, ¢,= 90 MPa, and shear stress t,y= 30 MPa. Determine the factor of safety
according to
a) Maximum Principal Stress theory
b)Maximum Shear Stress theory
c) Maximum Principal Strain theory
Take E= 200 GPa, Poisson's ratio= 0.3, Elastic limit stress G,jy= 220 MPa.