Professional Documents
Culture Documents
FBS-CMZBR Zigbee Communication Modules: 1. Information
FBS-CMZBR Zigbee Communication Modules: 1. Information
1. Information
a. Button & connector:
b. Default value:
Comm. port:19200,8n1
Destination MAC Address:0x1122334455667732(8 Byte)
Source MAC Address:0x1122334455667731(8 Byte)
PAN ID:0x6436(2 Byte)
Channel:11
Device Model:Master (Broadcast Transmit)
c. Functions:
FBs-CMZBR can be Master or Slave mode. These two modes must set
same PAN ID. In one space execute two sets of FBs-CMZBR can adjust
PAN ID to define two systems. When FBs-CMZBR as Master (radio
mode ) so within communication range all with same PAN ID can
receive data transmitted from Master. When FBs-CMZBR as Slave
must been paired with Master, so Slave receives data will then
transmit to the paired Master only.
2. Power on
a. Get device & PC cables plus in FBs-CMZBR and fasten screws. In case of
PC not support RS-485 then has to add a RS485 to RS232 converter so
can link to PC.
b. Get power cable plug in FBs-CMZBR and fasten screws then can power
on. FBs-CMZBR power on is in working mode, in case want to change
parameter then have to get in mode of setting.
a. PC
iv. press enter then can see the function list of terminating machine.
i. power off
ii. press Config/Binding button and plug in power
iii. LED blinks then Red lights means getting in setting mode.
After (Z) , terminal machine turns to above screen then FBs-CMZBR finishs
4. Set pairing
FBs-CMZBR default mode Master can directly link other FBs-CMZBR for
following methods.
In working mode and failed data transmitting, please check LED light.
was clear