Professional Documents
Culture Documents
Rocker Arm - Disassemble (RENR8630-12)
Rocker Arm - Disassemble (RENR8630-12)
Rocker Arm - Disassemble (RENR8630-12)
Disassembly Procedure
PIP
Start By:
-
202 1011
12: 3 / 0 8
a. Remove the rocker arms and the rocker shaft. Refer to Disassembly and Assembly, "Rocker
791
3
Arm and Shaft - Remove".
2 / 1
RE :04- 3
1
NOTICE
N 0
©2 R 863 3:00
Keep all parts clean from contaminants.
023 0
Contaminants may cause rapid wear and shortened component
life.
Cat
erp
illa
rI nc.
Illustration 1 g01047557
1. Remove valve rocker arms (11) and electronic unit injector rocker arm (3) from rocker shaft
assembly (4).
4. Remove button (10) from adjustment screw (8). Remove O-ring seal (9) from the adjustment
screw.
https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Rocker%2520Arm%2520-%2520Disassemble%2520(RENR86… 1/2
13/3/23, 09:21 SIS 2.0
5. Remove jam nut (2) from unit injector adjustment screw (1).
6. Remove unit injector adjustment screw (1) from electronic unit injector rocker arm (3).
7. Remove button (6) from unit injector adjustment screw (1). Remove O-ring seal (5) from the unit
injector adjustment screw.
PIP-10118791
2023/03/13
12:20:51-03:00
i02034827
© 2023 Caterpillar Inc.
https://sis2.cat.com/#/print-preview/service/%257B%2522title%2522%253A%2522Rocker%2520Arm%2520-%2520Disassemble%2520(RENR86… 2/2