The multi-use USB temperature data logger can be used to monitor temperatures during storage and transportation. It has a wide measuring range of -30°C to 60°C and high accuracy of ±0.5°C. The logger stores over 32,000 temperature readings and can automatically generate PDF and CSV reports upon connection to a computer. To start recording, the user presses and holds the button for 3 seconds until the light turns on. The device will record temperature readings at default 10 minute intervals until stopped.
The multi-use USB temperature data logger can be used to monitor temperatures during storage and transportation. It has a wide measuring range of -30°C to 60°C and high accuracy of ±0.5°C. The logger stores over 32,000 temperature readings and can automatically generate PDF and CSV reports upon connection to a computer. To start recording, the user presses and holds the button for 3 seconds until the light turns on. The device will record temperature readings at default 10 minute intervals until stopped.
The multi-use USB temperature data logger can be used to monitor temperatures during storage and transportation. It has a wide measuring range of -30°C to 60°C and high accuracy of ±0.5°C. The logger stores over 32,000 temperature readings and can automatically generate PDF and CSV reports upon connection to a computer. To start recording, the user presses and holds the button for 3 seconds until the light turns on. The device will record temperature readings at default 10 minute intervals until stopped.
The multi-use USB temperature data logger can be used to monitor temperatures during storage and transportation. It has a wide measuring range of -30°C to 60°C and high accuracy of ±0.5°C. The logger stores over 32,000 temperature readings and can automatically generate PDF and CSV reports upon connection to a computer. To start recording, the user presses and holds the button for 3 seconds until the light turns on. The device will record temperature readings at default 10 minute intervals until stopped.
Multi-Use USB Temp Data Logger Product Introduction Product Features Main Features which indicates the logger
Main Features which indicates the logger is started. d. Stop Recording
User Manual The device is mainly used to monitor Item Parameter Designed to be multi-use b. Mark Press and hold the “■” button for more the temperature of food, medicine, Temp Scale ℃ or ℉ Temperature measurement and When the device is recording, press and than 3s until the “ALARM” light is on, and chemical and other products during Temp ±0.5℃(-20℃ ~ +40℃), recording hold the “▶” button for more than 3s, and the “■” displays on the screen, indicating Accuracy ±1.0℃(other) storage and transportation. It is widely Temp Range -30℃ ~ 60℃ Wide measuring range, high the screen will switch to the “MARK” stopping recording successfully. used in all links of warehousing and Resolution 0.1 accuracy and large data memory interface. The number of “MARK” will (Note: If the logger is stopped during the cold chain logistics, such as reefer Capacity 32,000 Statistics available on LCD screen increase by one, indicating data was status of start delay, a PDF report containers, refrigerated trucks, Startup Mode Button or software No software needed to export data marked successfully. generated when inserted into PC but refrigerated distribution boxes, cold Interval Optional Automatically generates PDF report (Note: One record interval can mark one without data.) Default: 10 mins storage laboratory, etc. Compact, light and CSV file time only, the logger can mark 6 times in Start Delay Optional and economical to use. After the Default: 30 mins Programmable software for logging one recording trip. Under status of start LCD Display Instruction recording is completed, insert it into the Optional parameters, alarms, and start delay delay, the mark operation is disabled.) Alarm Delay Default: 10 mins USB port of PC or computer, it will c. Page Turning Optional Alarm Range Default: <2℃ or >8℃ automatically generate reports without Operating Instruction shortly press “▶” to switch to different Shelf Life 1 year (replaceable) display interface. The interfaces shown any driver. a. Start Recording Report Automatic PDF and CSV in sequence are respectively: Time Zone UTC +0:00 (Default) Press and hold the “▶” button for more Dimensions 83mm*36mm*14mm Real-time Temperature → LOG → MARK than 3s until that the “ OK” light is on and Weight 23g →Temperature Upper Limit the “▶” or “WAIT” displays on the screen, →Temperature Lower Limit . Note: Battery Replacement Battery Status Indication 4. Never dismantle the battery. Do not a. If the device is used for the first time 1. Turn the battery cover remove it if the logger is running. Battery Capacity or after re-configuration, the real-time counterclockwise to open it. 5. Replace old battery with a new Full temperature interface will be the CR2032 button cell with the negative ⑤Upper limit ⑥Lower limit Good initialization interface. (Opened status) inward. b. Real-time temperature interface is Medium update every 10s. Low(please replace ▶ Data logger is recording 2. Put in a new CR2032 button battery, batery) Data logger has stopped Real-time temp interface ■ recording with the negative inward. Data logger is in the Precautions WAIT 1. Please read the manual carefully status of start delay Temperature is within the before using the logger. √ normal range 2. It is recommended to check the ②Above upper limits ①Initialization “ ×” and Measured temperature exceeds its temperature 3. Turn the battery cover clockwise to battery status before restarting the logger “↑” light upper limit close it. to ensure that the remaining battery capacity could finish the recording task. “ ×” and temperature exceeds its 3. The LCD screen will be off after 10 (Closed status) “↓” light temperature lower limit seconds of inactivity. Please press the ③Log interface ④Mark interface “▶” button to lighten it.