Professional Documents
Culture Documents
TD Series Displacement Sensors: Specifications Notes
TD Series Displacement Sensors: Specifications Notes
TD Series Displacement Sensors: Specifications Notes
, LTD
TD series displacement sensors convert mechanical measurement of liner movement into electrical power. Through
this principle, sensors measure and control displacement automatically. TD series displacement sensors have simple
structure, high reliability, excellent usage and maintainability, long life, good linearity and high repeat precision. It
also has a wide measuring range, low time constant and fast dynamic response.
Specifications Notes
1. Linear range: 0~150mm. 1. Sensor wires: primary: brown yellow, sec1: black
2. Linearity: ±0.3% full stroke. green, sec2: blue red.
3. Excitation voltage: 3VRMS (1~17VRMS). 2. Linear range: within two scale lines of the sensor
4. Excitation frequency: 2.5 KHz (400 Hz~100 KHz) rod (based on “Inlet”).
5. Operating temperature: -40~150℃ 3. The sensor rod number and shell number must to
6. Coefficient of sensitive: ±0.03%FSO./℃ be consistent, supporting the use.
7. Lead wires: six Teflon insulated sheathed cable, 4. Sensor fault diagnosis: measure PRI coil resistance
outside stainless steel sheathed hose. and SEC coil resistance.
8. Vibration tolerance: 20g up to 2 kHz. 5. Keep sensor shell and signal demodulation unit
away from strong magnetic fields.
Range Table
Linear Range A (mm) PRI Coil Resistance SEC Coil Resistance
Model Length (mm)
Unipolar Biopolar (Ω±15%) (Ω±15%)
3000TD 0~150 ±75 356 175 258