Professional Documents
Culture Documents
7650-8550-DS-500-6211 Done
7650-8550-DS-500-6211 Done
7650-8550-DS-500-6211
© All rights reserved. This document is protected by copyright. The contents and information in this document, in particular text, drawings and images it contains, are
strictly confidential and may not be altered or amended, copied, used or disclosed without the express permission of the rights holder.
DocuSign Envelope ID: 603FFE4F-81D2-428B-8746-CA96970B9C28
CLIENT
LOGO Project One – ECR EPCm
INDEX
© All rights reserved. This document is protected by copyright. The contents and information in this document, in particular text, drawings and images it contains,
are strictly confidential and may not be altered or amended, copied, used or disclosed without the express permission of the rights holder.
DocuSign Envelope ID: 603FFE4F-81D2-428B-8746-CA96970B9C28
GENERAL NOTES:
Binder Package
General Notes
Template: P6
7650-8550-DS-500-6211, RADAR
EE1 AS 27/12/2022 FOR ENQUIRY LEVEL TRANSMITTER Page N-1 of 1
No. By Date Description Doc. No.: DATASHEETS - (P6 Rev.: EE1
DocuSign Envelope ID: 603FFE4F-81D2-428B-8746-CA96970B9C28
INSTRUMENT SPECIFICATION SHEETS - GUIDED WAVE RADAR LEVEL TRANSMITTERS
Units Units
1 GENERAL : 60 GENERAL :
2 Tag No. ECR-LT -50306 61 Plant ECR_P
3 Service D5030 C3 Refr Seal Drum Lvl 62 Unit 50
4 Equipment ECR-D-5030 63 Area Classification Zone 1, IIC, T4
5 Piping Class / Trim Spec B1GP3 64 Location EQUIP
6 P&ID No. 7650-8110-25-550-2009 65 Design Code -
7 66
8 PROBE / BODY : 67 TRANSMITTER / ELECTRONICS :
9 Measuring Method Time Domain Reflectometry 68 Type Guided Wave Radar
10 Probe Type Rigid Single Rod 69 Mounting External Chamber Mounted
11 Probe Material SS316/316L 70 Power Supply / From 24VDC Loop Powered
12 Probe Lining Material NA 71 Accuracy % Repeatibility ±3mm VTA
13 Probe Length mm VTA 72 Output Signal Category 4-20mA HART HART Device
14 Process Connection Flanged 73 Gas Group Temp Rating IIC T4
15 Flange Material SS316 74 Certification Zone EEx d ZONE 1
16 Flange Size/Rating/Facing 3" 300# RF 75 IP Rating IP 66
17 Mounting Side-Side 76 Cable Entries 2
18 Seal Material PTFE 77 Electrical Connections M20 x 1.5
19 Standard Drawing - Stilling Well N/A 78 Crippled Mode Detection Required (NAMUR NE 043)
20 Stilling Well Material N/A 79 Burn-out Direction TBD
21 Stilling Well O.D. mm N/A 80 Calibrated Range % 0 - 100
22 Stilling Well Length mm N/A 81
23 Instrument Range mm 190 - 2375 82
24 CHAMBER : 83
25 Chamber Material ASTM A333 GR. 6 (LTCS) 84
26 Chamber Size / Centre to Centre mm 3" Sch-40 2185 85
27 Vessel Connection Side-Side 86
28 Flange Size/Rating/Facing 2" 300# RF 87
29 Vent / Drain Required Required 88
30 Vent / Drain Connection Flanged 89
31 Vent/Drain Flange Size/Rating/Facing 1" 300# RF 90
32 91
33 PROCESS DATA : 92 SPECIAL REQUIREMENTS :
34 Lower Fluid Name Propylene Refrigerant 93 NACE Requirements N/A
35 Upper Fluid Name Propylene Refrigerant 94 Certification Authority VTA
36 Fluid State Lower / Upper Liquid Gas/Vapor 95 Certification Approval No. VTA
37 Operating Conditions Min Norm Max 96 Material Certificate See Notes
38 Pressure barg 13,53 97 Test Requirements See Notes
39 Temperature °C 34,6 98 Special Requirements for Service N/A
40 Lower Density kg/m³ 489,7 99 Fire Safe Design N/A
41 100 Paint Finish Mfr. STD
42 Lower Specific Gravity 101 Lightning Protection
43 102 Weight kg VTA
44 Normal Level mm 103
45 Design Pressure Min/Max barg 17 104
46 Design Temperature Min/Max °C -48 100 105
47 Dielectric Constant Upper/Lower 106 NON-VENDOR RELATED INFO :
48 Corrosive Agents Upper/Lower No No 107 Protection
49 Toxic Agents Upper/Lower No No 108 Tracing Temperature °C
50 Fluid Type / Service Identification 109 SAP Class
51 110 SAP Code
52 111
53 112 Req No.:
54 PURCHASE DATA : 113 REMARKS :
55 Manufacturer 114 See notes
56 Model Number 115
57 Serial Number 116
58 Purchase Order Number 117
59 Item Number 118
INSTRUMENT SPECIFICATION
Process Notes:
Instrument Notes:
I-1. Gaskets Materials: Sp. Winding + Inner. Ring: SS316, Filler: Graphite, Outer Ring: SS316 3mm Thk, Low Stress.
I-2. Stud & Nut Materials: STUD: ASTM A320 GR. L7 / NUT: ASTM A194 GR. 7, S3
I-3. Charpy Impact Tested At -20 Deg.C, Minimum 27 Joules Average and 20 Joules Minimum.
INSTRUMENT SPECIFICATION
INSTRUMENT SPECIFICATION
Process Notes:
Instrument Notes:
I-1. Gaskets Materials: Sp. Winding + Inner. Ring: SS316, Filler: Graphite, Outer Ring: SS316 3mm Thk, Low Stress.
I-2. Stud & Nut Materials: STUD: ASTM A320 GR. L7 / NUT: ASTM A194 GR. 7, S3
I-3. Charpy Impact Tested At -20 Deg.C, Minimum 27 Joules Average and 20 Joules Minimum.
I-4.
INSTRUMENT SPECIFICATION
INSTRUMENT SPECIFICATION
Process Notes:
Instrument Notes:
I-1. Gaskets Materials: Sp. Winding + Inner. Ring: SS316, Filler: Graphite, Outer Ring: SS316 3mm Thk, Low Stress.
I-2. Stud & Nut Materials: STUD: ASTM A320 GR. L7 / NUT: ASTM A194 GR. 7, S3
I-3. Charpy Impact Tested At -20 Deg.C, Minimum 27 Joules Average and 20 Joules Minimum.
INSTRUMENT SPECIFICATION
INSTRUMENT SPECIFICATION
Process Notes:
Instrument Notes:
I-1. Gaskets Materials: Sp. Winding + Inner. Ring: SS316, Filler: Graphite, Outer Ring: SS316 3mm Thk, Low Stress.
I-2. Stud & Nut Materials: STUD: ASTM A320 GR. L7 / NUT: ASTM A194 GR. 7, S3
I-3. Charpy Impact Tested At -20 Deg.C, Minimum 27 Joules Average and 20 Joules Minimum.
INSTRUMENT SPECIFICATION