Professional Documents
Culture Documents
Kor-15c Pur Nov2008
Kor-15c Pur Nov2008
Baseplate
The baseplate is constructed of corrosion-resistant aluminum and is
secured to the encapsulated base support.
Mounting
The KOR-15C can be mounted in upright, cantilever, or upside-
down positions. Stress relief devices should be used to support cable
connections.
Test Reports
IEEE test reports are stored electronically and can be e-mailed in
various formats at the time of shipment.
Standards
This unit meets all applicable IEEE and NEMA standards and can
be made to meet other standards, such as CSA or IEC, as requested.
-2-
Unit Dimensions
12.00
[305]
3.13
H2 H1 PRIMARY [76]
POLARITY
MARKER 1.00
H1
[25]
.75
[19] B
19.37
[492] H1
1" STD.
RATIO DECAL PIPE TAP
BOTH SIDES CLAMP TYPE SECONDARY
TERMINALS FOR #14 TO
GROUND LUG #1 WIRE. SECONDARY
WITH HOLE 1.25
[32] TERMINALS SHIPPED NAMEPLATE
FOR .38 [10] BOLT SHORT CIRCUITED.
X1 X2
5.625
[143] 1.38 5.56
[35] [141] .25
6.14 [6]
11.25
[156] 1" CONDUIT KNOCKOUT
14.48 [286]
IN BOTTOM OF JUNCTION BOX
[368]
Bar Dimensions
Weight Strike Creep
Primary A B
Amperes (in) (mm) (in) (mm) (lb) (kg) (in) (mm) (in) (mm)
5 - 100 .25 6 1.5 38 90 41 18.00 457 26.88 683
150 - 1200 .375 10 2.0 51 95 43 18.00 457 26.88 683
Baseplate Dimensions
GROUND LUG
NAMEPLATE
10.50 8.63
[267] [219]
.94 .63
[24] [16]
10.00
[254]
11.25
[286]
Additional styles available upon request. Contact your ABB Sales Representative or call +1-252-827-3212 for more information.
Note: 50 Hz designs available
+ times normal
ABB Inc.
3022 NC 43 North
Pinetops, NC 27864
Tel: +1-252-827-3212
www.abb.com/mediumvoltage