Professional Documents
Culture Documents
Loctite 222 Data
Loctite 222 Data
LOCTITE® 222
January-2009
m
Application Threadlocking m
m
m
05
2
m
Strength Low 0.
m
0.
50
15
0.
®
LOCTITE 222 is designed for the locking and sealing of
threaded fasteners which require easy disassembly with 25
standard hand tools. The product cures when confined in the
absence of air between close fitting metal surfaces and
prevents loosening and leakage from shock and vibration. 0
1min 5min10min 30min 1h 3h 6h 24h 72h
Particularly suitable for applications such as adjustment of Cure Time
set screws, small diameter or long engagement length
fasteners, where easy disassembly is required without Cure Speed vs. Temperature
shearing the screw. The thixotropic nature of LOCTITE® 222 The rate of cure will depend on the temperature. The graph
reduces the migration of liquid product after application to the below shows the breakaway strength developed with time at
substrate. different temperatures on M10 steel nuts and bolts and tested
according to ISO 10964.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.05
100
% of Full Strength on Steel
C
°C
100
Cure Speed vs. Activator
% of Full Strength on Steel
75
at
l
ee
to ISO 10964.
nc
50
Zi
el
s s te
25 s
Bra le ss
ain
St
0
1min 5min10min 30min 1h 3h 6h 24h 72h
Cure Time
TDS LOCTITE® 222, January-2009
% Strength @ 22 °C
No activator
75 75
1™
47
50 or7 50
9™ivat
764 Act
tor
iva
25 Act 25
0 0
1min 5min10min 30min 1h 3h 6h 24h 72h 0 50 100 150
Cure Time Temperature, °C
Heat Aging
TYPICAL PROPERTIES OF CURED MATERIAL Aged at temperature indicated and tested @ 22 °C
Physical Properties:
Coefficient of Thermal Expansion, 80×10-6
125
ISO 11359-2, K-1
% Initial Strength @ 22 °C
Coefficient of Thermal Conductivity, ISO 8302, 0.1 120 °C
W/(m·K) 100
Specific Heat, kJ/(kg·K) 0.3
75
TYPICAL PERFORMANCE OF CURED MATERIAL
Adhesive Properties
50
After 24 hours @ 22 °C 150 °C
Breakaway Torque, ISO 10964:
25
M10 steel nuts and bolts N·m 6
(lb.in.) (50)
0
Prevail Torque, ISO 10964: 0 1000 2000 3000 4000 5000
M10 steel nuts and bolts N·m 4 Exposure Time, hours
(lb.in.) (35)
Chemical/Solvent Resistance
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m: Aged under conditions indicated and tested @ 22 °C.
M10 steel nuts and bolts N·m 14 % of initial strength
(lb.in.) (120)
Environment °C 100 h 500 h 1000 h 5000 h
Max. Prevail Torque, ISO 10964, Pre-torqued to 5 N·m: Motor oil (MIL-L-46152) 125 100 95 90 85
M10 steel nuts and bolts N·m 14
Leaded Petrol 22 95 95 95 95
(lb.in.) (120)
Brake fluid 22 95 95 95 90
Compressive Shear Strength, ISO 10123: Water/glycol 50/50 87 80 80 80 80
Steel pins and collars N/mm² ≥2.5LMS
(psi) (≥360) Acetone 22 100 90 90 90
Ethanol 22 95 95 90 90
TYPICAL ENVIRONMENTAL RESISTANCE GENERAL INFORMATION
Cured for 1 week @ 22 °C
This product is not recommended for use in pure oxygen
Breakloose Torque, ISO 10964, Pre-torqued to 5 N·m:
and/or oxygen rich systems and should not be selected as
M10 zinc phosphate steel nuts and bolts
a sealant for chlorine or other strong oxidizing materials
Hot Strength For safe handling information on this product, consult the
Tested at temperature Material Safety Data Sheet (MSDS).