Professional Documents
Culture Documents
08 Special Lubrication Systems PDF
08 Special Lubrication Systems PDF
Metering elements
Oil-air mixing distributor MV-4299
Functional description
Valve sleeve
Normal position:
The lubricant is in the dosage chamber of the
Non-return metering valve. The lubricant quantity is determined
valve
Metering elements
Drilling for
by the piston stroke of the delivery piston.
spray air
Dosage chamber
Delivery piston
Piston stroke:
As soon as the pump delivers lubricant, it flows from
the main line to the metering valve and pushes the
delivery piston towards the non-return valve at
approx. 20 bar. The lubricant, which is in the dosage
chamber, is pushed through the non-return valve
and delivered to the lub point. The conical nipple of
the delivery piston prevents any lubricant leakage
and the valve sleeve prevents the lubricant from
reaching the spray air in the connection hole.
Re-filling:
After the pump has been switched off, the main line is
emptied (into the reservoir) and the spring pushes
the piston back into its normal position for the next
cycle. Via the ring opening, the dosage space is
again filled with lubricant. When the drilling for spray
state: 01.16EN
* d e p e n d s o n t h e l u b r i c a n t ’ s v i s c o s i t y.
08-1-60-01
Technical data
Material: flat aluminium material
No of lube points: optional 2 / 4 / 6 / 8
Installation position: any
Ambient temperature: 0 to 70 °C
Metering elements
FAZ04057-01
Lubricant temperature range: 0 bis 70 °C
metered oil/air mixture
Plug connection Ø 4 Spray air
connection
M10x1
38
Plug screw and ventilation
30
screw ES 10.1
Order-no.: 0802000255
9
No. of lube 2 4 6 8 7 18 19 19 19
points 12 “A”
Dim. “A” (mm) 55 93 131 169 20 Lubricant Metering valve cartridge
Dim. “B” (mm) 37 75 113 151 connection metering volume
M10x1 see order key
Code 2 4 6 8
Metering volume (mm³ / stroke) 10 20 30 50
Code 1 2 3 4
Sprayed air connection M10x1
Code 1
Metered lubricant connection M10x1
Code 1
08-1-60-02
Code 00
Subject to alterations! © BEKA 2016 All rights reserved!
BAIER
BAIER++KÖPPEL
KÖPPELGmbH
GmbH++CO
COKG BEETHOVENSTR. 14 TEL.:
POSTFACH
+49 9241
1320
729-0 TEL.:
WEB: +49
www.beka-lube.de
9241 729-0 WEB: www.beka-lube.de
D-91257 PEGNITZ FAX:
D-91253
+49 PEGNITZ
9241 729-50 FAX:
E-MAIL:
+49 9241
beka@beka-lube.de
729-50 E-MAIL: beka@beka-lube.de Contents
Special Lubrication Systems
state: 01.16EN
© BEKA 2014 All rights reserved!
1090200398
Zentralschmiertechnik
BAIER + KÖPPEL
lubrication points
single line unit
compressed air regular
M
E
bearing, breadth andb earing line number. The re- The outflow opening for the oil/air mixture with a dia-
commended value, for defination of the maximum oil meter of 0,8 mm shouldb e directed for spraying in
quantity couldb e assumedb y the following formula. the middle of rolling element andb earing ring. Each
bearing line must be supplied separately.
Q = d x W x A : 250 An air outflow opening in spraying directionand a
Q = oil quantity in cm3/h sufficiently oil drainh ole must be guaranted to avoid
d = inside bearing diameter the building of an oil marsh.
---2 ---
1090200398
D --91253
Subject to alterations! Pegnitz -- Postfach 1320 -- Telefon 09241/729--0 -- FAX 09241/72950
© BEKA 2016 All rights reserved!
BAIER
BAIER++KÖPPEL
KÖPPELGmbH
GmbH++CO
COKG BEETHOVENSTR. 14 TEL.:
POSTFACH
+49 9241
1320
729-0 TEL.:
WEB: +49
www.beka-lube.de
9241 729-0 WEB: www.beka-lube.de
D-91257 PEGNITZ FAX:
D-91253
+49 PEGNITZ
9241 729-50 FAX:
E-MAIL:
+49 9241
beka@beka-lube.de
729-50 E-MAIL: beka@beka-lube.de Contents
© BEKA 2016 All rights reserved! Inhalt
Contents
© BEKA 2016 All rights reserved!
Inhalt
Contents
© BEKA 2016 All rights reserved! X Inhalt
Contents