The document provides specifications for an 11kV, 630A medium voltage switchgear, including components such as a floor standing cubicle, 630A circuit breaker with protection devices, main bus bar, earth switch, feeder management relay, current and potential transformers, meters, insulators, surge arresters, and a controls compartment with auxiliary contacts and control devices.
The document provides specifications for an 11kV, 630A medium voltage switchgear, including components such as a floor standing cubicle, 630A circuit breaker with protection devices, main bus bar, earth switch, feeder management relay, current and potential transformers, meters, insulators, surge arresters, and a controls compartment with auxiliary contacts and control devices.
The document provides specifications for an 11kV, 630A medium voltage switchgear, including components such as a floor standing cubicle, 630A circuit breaker with protection devices, main bus bar, earth switch, feeder management relay, current and potential transformers, meters, insulators, surge arresters, and a controls compartment with auxiliary contacts and control devices.
1 – Floor standing cubicle, bottom entry control cables access, approximately 2445(H) mm x 650(W) mm x 1400(D) mm. Circuit breaker, main bus and transformers: 1 – ABB VD4, 630A, 25 kA at 12kV, with necessary auxiliary contacts Spring charging motor- 110 VDC Shunt opening release- 110 VDC Shunt closing release- 110 VDC Truck blocking magnet Operation counter Auxiliary contacts (5NO+5NC) Truck position signalling contacts Operating mechanism blocking magnet Additional auxiliary contacts (3NO+2NC) Operating mechanism springs status contact
Three phase directional overcurrent protection
Three phase overvoltage, under voltage protection Residual over voltage protection Reverse power protection Over/under frequency protection Earth fault protection Three phase thermal overload protection Non directional earth fault protection Negative sequence current protection
1 – Main Bus Bar rated at 630A
1 – Earth Switch 12 kV, 630A, 25 kA/3s 1 – ABB Relay (REF615- Feeder Management Relay) 3 – CT (As Required) 3 – PT (As Required) 1 – Multifunction Meter 3 – Ampere Meter 1 – Voltmeter and Selector Switch 1 – LRM Voltage Indicator 3 – Capacitive Insulator 3 – Surge Arrester 12 kV, 10 kA 1 – ES Position Indicator 1 – CB Discrepancy Switch 1 – 100W Heater & Thermostat Controls / relay / metering compartment: 1 – Lot of VCB auxiliary contacts 1 – VCB On and OFF control 1 – Set of DIN rail auxiliary relays, MCBs, nameplates, terminal boards