Professional Documents
Culture Documents
Takeoff Steel1
Takeoff Steel1
Takeoff Steel1
Page 1 of 8
Project: Steel Structure Drawing Title: SSDE Student name: rishi bhoobdasur 77229345 QS14
Drawings sheets: 01 to 04 11.33.1.2
Reinforcement,
Mild steel bars (t),
11.2.1.2.2.1 Nominal size stated,
In-situ concrete, Bent.
Horizontal work (m³),
≤ 300 thick, Reinforcement, MS bars to BS 4449.
In structures,
Reinforced >5%, MS bar, 20mm diameter, bent
Horizontal work includes foundations. 7/10/ 0.90 mark no. 2, 2.466kg/m. 2
70 2.47 0.16 t
In-situ concrete designed mix
grade C30 reinforced.
11.33.1.4
Pad foundations Reinforcement,
10/ 1.00 Length (m) 1.00 Mild steel bars (t),
10 1.00 Width (m) 1.00 Nominal size stated,
0.40 4.00 m³ Height (m) 0.40 Links.
Page 2 of 8
Project: Steel Structure Drawing Title: SSDE Student name: rishi bhoobdasur 77229345 QS14
Drawings sheets: 01 to 04 15.2.3.1.4
Structural steelwork,
Frames members, permanent erection
15.2.2.2.2 on site (t),
Structural steelwork, Length exceeding 9.00m,
Frames members, permanent erection Weight ≤25kg/m,
on site (t), Purlins.
Length over 1.00 but not exceeding 9.00m,
Weight 25-50kg/m, Grade 43 weldable structural steel
Beams. BS 7613 and 7868;
and section to BS 4 hot rolled,
Grade 43 weldable structural steel welded fabrication, unless stated otherwise
BS 7613 and 7868; or equal and approved.
and section to BS 4 hot rolled,
welded fabrication, unless stated otherwise Steadman purlins C24020;
or equal and approved. 240mm x 74mm x 2mm channel
@1200 c/c.
Universal beams 203mm x 133mm 4/2/ 20.21 Length (m) 20.203
4/2/ 5.00 Length (m) 4.994 8 0.01 1.02 t Weight (kg/m) 6.39
15.2.2.1.7
15.2.2.1.3 Structural steelwork,
Structural steelwork, Frames members, permanent erection
Frames members, permanent erection on site (t),
on site (t), Length over 1.00 but not exceeding 9.00m,
Length over 1.00 but not exceeding 9.00m, Weight ≤25kg/m,
Weight ≤25kg/m, Trusses.
Rafters.
Grade 43 weldable structural steel
Grade 43 weldable structural steel BS 7613 and 7868;
BS 7613 and 7868; and section to BS 4 hot rolled,
and section to BS 4 hot rolled, welded fabrication, unless stated otherwise
welded fabrication, unless stated otherwise or equal and approved.
or equal and approved.
Ties 100mm x 100mm angle
Rafters 100mm x 100mm set back to back
5/2/ 5.89 Length (m) 5.89 5/2/ 5.12 Length (m) 5.115
10 0.01 0.70 t Weight (kg/m) 12 10 0.01 0.76 t Weight (kg/m) 15
Page 3 of 8
Project: Steel Structure Drawing Title: SSDE Student name: rishi bhoobdasur 77229345 QS14
Drawings sheets: 01 to 04 17.1.2.3.1
Sheet roof coverings,
Coverings >500mm wide (m²),
15.5.1.1.1 Sloping; pitch stated,
Structural steelwork, Finish to exposed surface,
Allowance for fittings (t), Nature of base.
Calculated weight,
To framed members, Colour coated long span aluminium
Fittings are components that allow roofing sheet
members to be joined together or are 8/ 20.23 Length 20.230
other brackets, supports and the like 8 6.09 985.61 m² Width 6.087
that are supplied and attached, either
on or off site, to the main loadbearing
frame by the structural metal contractor.
Page 4 of 8
Page 5 of 8
Project: Concrete Frame Student name: rishi bhoobdasur 77229345 QS14
ITEM NO. DESCRIPTION QTY UNIT RATE AMOUNT (£)
Bill of Quantity
finishing work
1 electrical 1 sum 50000
2 painting 1 sum 115000
3 plumbing 1 sum 75000
4 aluminium 1 lot 20000
5 wooden door 1 lot
6 flooring
boundary wall
B.1 excavation
B.1.1 renforcement 1 m3
B.2 blocks
B.2.1 labour 4 m3
interior
C.1 cader 210000
C.1.1 tiles 16 m
metal work
D.1 raiser
D.1.1 hand rail 0.1 t
D.1.2 0.2 t
D.1.3 0.3 t
aluminium
E.1
Page 6 of 8
Page 7 of 8
Project: Concrete Frame Student name: rishi bhoobdasur 77229345 QS14
ITEM NO. DESCRIPTION ASSUMPTION ARCHITECT'S RESPONSE
A - Excavation and filling
1 Source of backfill materials not stated Excavated material to be used
B - Structural steelwork
Taking the angles stated on the
Length of struts, hanger ties and rafters are not drawings into consideration, height
2
specified for top of roof differs; dimensions
are calculated accordingly
Assumed dimension is 222x209 for
3 Cap plate dimensions not stated top of column, extending by 203.2
on each side
4 Cleats for beams thickness not specified Assumed to be same as cap plate
Page 8 of 8