The document provides design criteria and conditions for a tennis court project in Bangkok, including:
1. Design loads for the roof, frame, wind, collateral, and dead loads.
2. Design codes to be followed including ASCE 7-16, IBC-2006, and LRFD ASCE 7-16.
3. Accessory conditions such as purlin and girt spacing, roofing specifications, roof slope, ventilation, column design, bay spacing, and siding frames.
4. Steelwork finish conditions including welding, blasting, primer, and top coat specifications.
The document provides design criteria and conditions for a tennis court project in Bangkok, including:
1. Design loads for the roof, frame, wind, collateral, and dead loads.
2. Design codes to be followed including ASCE 7-16, IBC-2006, and LRFD ASCE 7-16.
3. Accessory conditions such as purlin and girt spacing, roofing specifications, roof slope, ventilation, column design, bay spacing, and siding frames.
4. Steelwork finish conditions including welding, blasting, primer, and top coat specifications.
The document provides design criteria and conditions for a tennis court project in Bangkok, including:
1. Design loads for the roof, frame, wind, collateral, and dead loads.
2. Design codes to be followed including ASCE 7-16, IBC-2006, and LRFD ASCE 7-16.
3. Accessory conditions such as purlin and girt spacing, roofing specifications, roof slope, ventilation, column design, bay spacing, and siding frames.
4. Steelwork finish conditions including welding, blasting, primer, and top coat specifications.
2. Girt spacing max (for siding) =optimize ( 1.2m max) 3. Specification of roofing sheet = 4. Roof slope = 5. Roof Ventilator = 6. Column condition = steel column (optimize) 7. Width module (m) = followed customer drawing / column distance can be optimized 8. Bay spacing (m) = followed customer drawing / column distance can be optimized 9. Siding Frame (1) = for metalsheet siding cover stainless steel gutter at grid line A,G (Can be redesigned to optimise 10. Siding Frame (2) = for canvas ( canvas can be lifted up when fully open air required) at grid line 1 and 7 (End wall) level +6m to +15m 11. Siding Frame (3) = for chain link at level +,- 0.0 to +6m (4 sides) 12. Bracket and Running Beam = none.
Steel work finished condition
1. Welding = Both side welding 2. Shot Blasting = sa2 3. Primer = 50 micron Alkyde 4. Top coat = 50 micron Alkyde 5. Fire proof paint = none
Remarks.
- Bottom of Plate are at +0.0m ( at finished ground floor level , no kicker)