Professional Documents
Culture Documents
Related
Related
XXXX proposed a numerical simulation of air blast by using Eulerian-material formulation and
validate for high pressure wave propagation and comparing the examples with experimental
results. High explosion process is simulated using an Eulerian formulation, with a fixed mesh.
Unlike classical Lagrangian methods, the mesh is fixed and the material flows though the mesh.
Two different cases have been tested, a free propagation pressure wave, and pressure wave with
rigid wall reflection. For the advection algorithm that follows the Lagrangian phase in the split
method, we used the second-order algorithms. The pressure impulses computed by time
integration of pressure time history are very close for both simulations. Good agreements for the
pressure transient in the explosion with experimental data are obtained and major explosion
physical phenomenon can well simulated using the Eulerian multi-material method.
YYY proposed a numerical study of Fluid-structure interaction dynamics under high explosive
Detonation. This research is based upon open software and the coupling library and the
blastFoam solver is used to support the simulation. To verify the solver, simulation of
perpendicular elastic flap motion under explosion is carried out. The detonation velocity ,
pressure and density at the simulation time step are captured .
Due to the large mesh scale ratio of fluid to structure,the parallel acceleration effect of FSI is
mainly affected by the solving of fluid.
ZZZ proposed Blast impact response of aluminum foam sandwich composites examines the
modeling of aluminum foam sandwich composites subjected to blast loads using LS-DYNA
software. The sandwich composite was designed using laminated face sheets (S2 glass/epoxy
and aluminum foam core. The aluminum foam core was modeled using an anisotropic material
model. Various blast load of TNT was .applied and the box resulted in outward radial wave propagation.
The blast wave patterns from the explosion of cylindrical charges are very complex and the
pressure-time histories exhibit multiple shocks. So, in order to make accurate assessment of
parameter of blast wave MMM proposed a blast wave patterns for non-spherical charges which
is Tetryl explosive. The experimental results are analyzed and behavior of near field/far field has
been studied using pressure vs time graph. Results shows that the blast wave parameters
demonstrated the usual behaviour of an ideal blast wave, i.e. the peak overpressure and the
positive impulse decreased with distance from the explosive source while the positive duration
increased.
An experimental blast program was conducted in a blast chamber to investigate the effects of
cylindrical charges on the peak reflected overpressure and impulse on the wall of the chamber.
Another purpose of the blast program was to develop an experimental data set which would
validate the finite element AUTODYN model. In the numerical model, air and TNT are
simulated by Euler processor. The calibration is processed with spherical charge and based on
the simulated results a new model for cylindrical charges was developed for predictions of
overpressure and impulse on a chamber wall.