Professional Documents
Culture Documents
Construction of A, B, C, D
Construction of A, B, C, D
5 SCHEDULE 04-06-2023
COMPLETION DATE
COLUMNS FOOTINGS
WALL FOOTINGS
PLINTH BEAM
LINTLE BEAM
ROOF BEAM
PARAPET WALLS
LADDERS
WORK PROGRESS CHART
Construction of A, B, C & D Types of Qtrs. at Gopalpuri
20
18
18
16
14
Numbers of Qtrs.
12
10 10
10
8 8
8
6
6
4 4 4 4
4
2 2
2
0
A - Types B - Types C - Types
Qtrs. Types
RCC Work
Types of work
PCC Work
Back-Filling Work
Excavation Work
0 5 10 15 20 25 30 35
No. of Qtrs.
No. of Qtrs. (Work Balanced) No. of Qtrs. (Work Completed) No. of Qtrs. (Work Planned)
RCC (Above Plinth Level) Work Progress Chart
Chajjas
Roof Slab
RCC Work in Qtrs.
Roof Beam
Lintle Beam
Sill band
Columns
0 5 10 15 20 25 30 35
Number of Qtrs.
No. of Qtrs. (Work Balanced) No. of Qtrs. (Work Completed) No. of Qtrs. (Work Planned)
Paint work
Tiles work
0 5 10 15 20 25 30 35
Number of Qtrs.
No. of Qtrs. (In Progress/ Balanced)) No. of Qtrs. (Work Completed) No. of Qtrs. (Work Planned)
QUALITY TEST PLAN FOR MATERIALS
Activity
Sl.
and Characteristics / instruments Reference Document
No
operation
1 2 3 4
1.1 Excavations-
2 Backfill -
3 Cement
3.3 Soundness
3.4 Fineness.
4 Coarse Aggregate
5 Fine Aggregate
5.5 Density
6 Water
7 Cement
7.1 Consistency
7.4 Fineness.
8 Coarse Aggregate
9 Fine Aggregate
9.3 zone
Fine
9.4 Aggregate Fineness Modulus
IS-2386, IS-383, IS:456-2000/
Tech. spec.
9.5 Density
10 Water
Admixtures
11
for Concrete
As per manufacturer's
Soundness of staging, shuttering and
specifications and as per IS
12.2 scaffolding including application of mould
-do- 3696, 4014, 4990, Tech Specs
oil / release agent
and Const. Drawings
As per technical
Foundation casting - Layout, Shape,
14.4 specifications and
dimensions.
construction drawings
15 BRICK MASONRY
15.3 Efflorescence
15.4 Dimensions
15.5 shape
15.6 warpage
15.1
Consistency
0
15.1
Initial and final Setting time
1
15.1
Cement Soundness IS: 269/ IS:1489 Tech Specs
2
15.1
Fineness.
3
15.1
compressive strength
4
15.1
Cement: sand ratio
5 As per tech specs
16.4 Consistency
16.7 Fineness.
Galvanised Galvanized hexagonal wire netting for lath Tech Specs and Const.
17
wire mesh and plaster Drawings
Materials
and
accessories-
Oil Bound,
Acrylic
Shade, type from brand and manufacturer Tech Specs and Const.
18.1 Emulsion,
as approved by EIC. Drawings
Chemical
Resistant, Oil
Resistant
Paint etc., as
applicable
Acceptance
Tech Specs and Const.
18.3 of painted Shade, finish, WFT
Drawings
surfaces
19 PAINTING SYSTEM - STEEL WORKS (OTHER THAN STRUCTURAL STEEL WORKS)
Rolling Surface finish and thickness of plate of Tech Specs and Const.
20.8
shutters approved make and DFT Drawings
Steel
IS: 1038 / IS:1361, IS: 7452
windows /
20.9 Material fabrication and fixtures and Tech
Grills/
Specs and Const. Drawings
Louvre
Doors /
20.1 Material - Rolled Steel, Z Sections, T-iron Tech Specs and Const.
Windows
0 frames sections, Plates etc. Drawings
Sections
Glass and
IS: 14900, IS:1081, IS: 3548,
20.1 glazing
Material IS:5437
1 (Clear float
Tech Specs and Const.
glass, wired)
Drawings
Curved
dome on
20.1 Material: Impact strength, K value, light Tech Specs and Const.
roof/ Poly
2 transmission value with class -I fire rating Drawings
Carbonate
Sheet
20.1 Materials (gypsum glass, glass fibre Tech Specs and Const.
False Ceiling
3 membrane, fibre board acoustical tiles etc) Drawings
21.3 Elastomeric Material- Primer coat, finishing coat Tech Specs and Const.
coatings Drawings
Wearing Materials - PCC, chicken wire mesh, Tech Specs and Const.
21.4
course elastomeric sealant Drawings
PVC coated
chain link
fencing (IS
2720),
Welded wire
mesh (IS Tech Specs and Const.
22.1 Materials
1566), Drawings
Reinforced
barbed tape
galvanised
(IS 2629)
etc.
Structural
steel,
painting
system,
Tech Specs and Const.
22.2 caster wheel, Materials
Drawings
ball and
bearing,
fixtures and
fasteners
Alignments, erection painting, DFT etc. and Tech Specs and Const.
22.3
acceptance of the installation and working Drawings
Cement
Tech Specs and Const.
23.1 Concrete Glass/ PVC strips in joints
Drawings
Flooring
Kota Stone,
Materials: Quality, texture, thickness, colour Tech Specs/ BOQ and Const.
23.4 Granite and
for each lot of delivery Drawings
Marble
Metallic /
Tech Specs and Const.
23.5 non-metallic Material
Drawings
hardener
Acid / alkali
and oil
resistant
high built Tech Specs and Const.
25.7 Material
seamless Drawings
epoxy-based
resin and
treatment
Acid / alkali
and oil
resistant
high built Tech Specs and Const.
25.8 Surface preparation (as applicable)
seamless Drawings, IS 2395
epoxy-based
resin and
treatment