This document provides information for a midterm exam in a Fall 2022/2023 Civil Engineering course on steel structure design. The exam contains one question with 7 parts related to analyzing and designing members of a steel truss structure covering an area. Key details include member forces, required drawings, safety checks, force calculations, member designs, and joint designs.
This document provides information for a midterm exam in a Fall 2022/2023 Civil Engineering course on steel structure design. The exam contains one question with 7 parts related to analyzing and designing members of a steel truss structure covering an area. Key details include member forces, required drawings, safety checks, force calculations, member designs, and joint designs.
This document provides information for a midterm exam in a Fall 2022/2023 Civil Engineering course on steel structure design. The exam contains one question with 7 parts related to analyzing and designing members of a steel truss structure covering an area. Key details include member forces, required drawings, safety checks, force calculations, member designs, and joint designs.
Assume any missing data. Use pencil in drawing only. Steel tables and Egyptian Code of Steel structures are allowed Question # 1: (24 Marks) The shown structure consists of steel trusses spaced at 8.0 m to cover an area of 24 x 48 m Given data Weight of steel = 50 kg/m2 Weight of covering (corrugated sheets) = 20 kg/m2 Live Load on the roof = 50 kg/m2 St(37) Gusset plate thickness = 10 mm Bolt diameter =16 mm
Member cross- section and internal forces
Member Force Cross-section
U1 - 9.5 ton 2Ls 70 X70X 7 U2 - 10.4 ton 2Ls 70 X70X 7 D1 + 11.2 ton ???? D2 - 10.5 ton 1L 70 X70X 7 V1 ??? 1L 60 x60 x 6 L1 12.5 ton 2Ls 80 x80 x8 L2 + 14.6 ton 2Ls 80 x80 x8 Required: 1- For the shown truss structure, draw to scale 1:200 the plan and side-view of the bracing system (4 Marks) 2- Check the safety of member D2 as 1Ls 70 x70 x 7 (Consider welded connection) (3 Marks) 3- Check the safety of member L1 as 2Ls 80 x80 x8 (Consider bolted connection) (3 Marks) 4- Find the maximum design force due to (D.L and L.L) in member V1 (3 Marks) 5- Design member D1 as a single angle for tension force =11.2 ton (welded connection) (3 Marks) 6- Compute the maximum compression capacity of member U1 (4 Marks) 7- Design and draw to scale 1:10 the joint J1 as welded connection and continuous chord (4 Marks)