Job safety analysis Functional Testing of Fire Detectors
L-FRM-065
Date: 03/04/2023 Job safety analysis
People In Danger Number: Contractor: AL YAMAMA Title: J S A : Functional Testing of Fire Detectors Task Routine Non-Routine
Risk Residual Risk
Activity Hazard(s) Consequence (s) Rating Control Measure(s) (H/M/L) (H/M/L)
Non – compliance of Refer HSEMS Procedure - Doc. No. SA.KOC.004
HSE MS Procedures “Permit to Work Take a Cold Work Permit from Asset Owner. Defective Tool & Equipment Ensure the Flame (UV / IR) Torch is of correct Loss of time. type and free from defect. Unintended Shutdown of Physical injury Refer manufacturer instruction for charging or Planning Facility / Equipment Fatality replacement of battery or bulb. Loss of material Lack of Communication Asses the risk & Override the fire detector to be High function tested. Low Do not remove override prior to resetting the alarm in the panel Maintain a radio communication between worker at fire Detector site and the person stationed near F & G panel / Control Room. ”.
L-FRM-065 07/2018, Rev. 01 Page
1 of 4 Job safety analysis Functional Testing of Fire Detectors L-FRM-065
Ensure the identity of detector before
switching the Flame Torch near it. Wrong Identity of Fire Detector Secure the step ladder properly before riding Falling from Height Loss of time. on it Burn Physical injury Fire & Explosion Fatality Keep the torch away from body part when Fault Alarm Loss of material switched on. Functional Testing Unsafe Storage / Do not dismantle the Flame Torch. Disposal of Flame Torch Refer manufacturer instruction for servicing or maintenance of Flame Torch. Confirm the alarm through radio High communication; whenever the flame torch is Low switched on. Keep the Flame Torch in safe and secured location. Do not dispose the Flame Torch unsafely. Refer manufacturer instruction for safe disposal / transportation of Flame Torch empty bottle.
L-FRM-065 07/2018, Rev. 01 Page
2 of 4 Job safety analysis Functional Testing of Fire Detectors L-FRM-065 Low HIGH SLIP TRIP AND FALL Ensure proper wind up & Scattered Material housekeeping at worksite. Remove the fire detector override after Windup & resetting the alarm in the panel. Housekeeping Ensure proper wind up & housekeeping at worksite. Normalize safety override after evaluating the risk. Close the permit & associated permits / certificated.
L-FRM-065 07/2018, Rev. 01 Page
3 of 4 Job safety analysis Functional Testing of Fire Detectors L-FRM-065
Personal Protective Equipment to be Used (insert Picture(s))
Number:
Assessed By Reviewed By Approved By
Name ASLAM MULANI Name MOHAMMAD ZAFAR IQBAL Name Name Designation Designation Designatio Designation n Signature Signature Signature Signature Date Date Date Date Declaration by employee involved in the activity detailed above - I fully understand the activity outlined above and the risk control measures that I must implement, use, or wear. I have received sufficient information, instruction and training so as to enable me to conduct this activity with the minimum of risk to myself, or others.