Professional Documents
Culture Documents
MS 762 2007 Amd.1 2010
MS 762 2007 Amd.1 2010
MALAYSIAN STANDARD
MS 762:2007
y
POLY (VINYL CHLORIDE) (PVC-U) – SPECIFICATIONS FOR COMPONENTS AND
THE SYSTEM (FIRST REVISION)
nl
ly o
The attached amendment on MS 762:2007 has been formally approved.
on se
Date: 07/01/2010
Amd. 1
e su
(1)
us er
Page 26, Table 10. Physical characteristics of pipes
rs ffic
Replace the existing Table 10 with the following:
be O
NOTE. The new Table 10 includes the alternative tests for the resistance to dichloromethane
at specified temperature.
em 's
m SM
/2 J
/J to
C d
r T nse
Fo ce
Li
MS 762:2007
Amd.1
Page: 1 of 2
Table 10. Physical characteristics of pipes
y
The pipe shall 15 min
8 mm< e ≤ 16 mm 30 min
nl
exhibit no Method A:
bubbles or e > 16 mm 60 min Liquid bath
ly o
cracks Length of test piece 200 mm
or
on se
Temperature 150 °C MS ISO 2505-1
Immersion time: together with
e su
MS ISO 2505-2
e ≤ 8 mm 60 min
8 mm < e ≤ 16 mm 120 min Method B: Air
e > 16 mm 240 min
(degree of gelation)
m SM
Uniaxial tensile test Maximum stress Test speed: 5 mm/min ± 1 mm/min ISO 6259-1
(Alternative test ≥ 45 MPa and
method to ISO 6259-2
Strain at break
resistance to
≥ 80 %
/2 J
dichloromethane)b)
/J to
resistance to ≥ 185 °C
dichloromethane) b)
r T nse
WARNING. Attention is drawn to the hazardous involved in using dichloromethane (for details, see MS ISO
9852)
Fo ce
a)
No attack means that there is no swelling , no scuffing ,no dissolution of pipe , no powdery precipitation in solvent
and no bubble formation on surface of pipe after completion of test ( bubbles formed during immersion in solution is
acceptable).
Li
b)
This test is not really suitable for factory production control. In case of dispute the resistance to dichloromethane
shall be used.
MS 762:2007
Amd.1
Page: 2 of 2