Professional Documents
Culture Documents
Flexi Remote Radio Head 2TX 900 (FHDB) PDF
Flexi Remote Radio Head 2TX 900 (FHDB) PDF
Single RAN, Rel. SRAN 17A, Operating Documentation, Issue 02 (HTML) > Descriptions > Flexi Multiradio 10 BTS Descriptions > Flexi Multiradio BTS RF
Module and Remote Radio Head Description > Descriptions of 2TX RRHs
Functional description
Property Value
MIMO 2TX
Interfaces
FHDB interfaces
Place the cursor over the table or module for more information.
1 of 4 10/17/2022, 1:36 PM
Flexi Remote Radio Head 2TX 900 (FHDB) http://localhost:9090/informationbrowser/topic/m172698092_html/htm/...
Electrical specifications
Property Value
Power consumption
Mode Configuration Output Estimated power consumption [W] at 48VDC input at 25°C. Non-committed estimated values depend on the final product
power per HW and SW optimization with +/- 10% margin. Average = (6h low hour load, 10h medium hour load and 8h busy hour load) /
carrier [W] 24h
2 of 4 10/17/2022, 1:36 PM
Flexi Remote Radio Head 2TX 900 (FHDB) http://localhost:9090/informationbrowser/topic/m172698092_html/htm/...
Mode Configuration Output Estimated power consumption [W] at 48VDC input at 25°C. Non-committed estimated values depend on the final product
power per HW and SW optimization with +/- 10% margin. Average = (6h low hour load, 10h medium hour load and 8h busy hour load) /
carrier [W] 24h
0.4 0.8
Property Value
Installation options
• pole/wall installation
• directly on the wall installation
IP rating IP65
Height A.101 As delivered, cable tie point recessed: 335.2 mm (13.2 in.)
A.102 With lower mounting bracket in the "FMFA" position: 571 mm
(22.5 in.)
With lower mounting bracket in the alternative "ALT" position:
621 mm (24.4 in.)
Volume A.101 21 l
A.102
A.103 19.1 l
3 of 4 10/17/2022, 1:36 PM
Flexi Remote Radio Head 2TX 900 (FHDB) http://localhost:9090/informationbrowser/topic/m172698092_html/htm/...
Environmental specifications
Property Value
Maximum operational outdoor temperature in the shade, assuming wind speed is 3 m/s (at +55°C (131°F)
constant high ambient temperature, maximum output power might be limited)
Maximum operational outdoor temperature in the sun, assuming wind speed is 3 m/s +50°C (122°F)
Maximum indoor temperature, assuming wind speed is 0 m/s (this is valid for fanless products) +40°C (104°F)
LEDs
Red, stable Critical alarm affecting the whole RF module or all antenna carriers Fault
Stable Red for less than 5 seconds and changes to Switched ON, but the next conditions are not reached yet No alarm
Stable Yellow
Stable Red for less than 5 seconds The module is in the process of resetting No alarm
Periodic Red and Green Antenna line faulty/degraded due to external factors (for example, VSWR Alarm
minor/major values exceeded, Antenna line device faulty/degraded)
Blinking Colors (Red, Yellow, and Green), each color Module highlighting (Flexi BTS SM functionality that can help identifying No alarm
stable for 0.5 second faulty module)
NOTICE: The RRH should always be mounted in a vertical orientation with connectors on the bottom side to ensure proper cooling.
Note: The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down.
Related resources
4 of 4 10/17/2022, 1:36 PM