Professional Documents
Culture Documents
Larks Head Design
Larks Head Design
HEAD
DESIGN
LARKS HEAD
DESIGN
DESCRIPTION
LARKS HEAD KNOT
PROCEDURE The Larks Head Knot is one of the most frequently
used decorative knots in Macrame. Another name
for this knot is the Cow Hitch.
LARKS HEAD
DESIGN
DESCRIPTION
LARKS HEAD KNOT
PROCEDURE A hitch made by passing the bight of a line
through a ring or around an object and then
passing the two ends through the bight.
LARKS HEAD LARKS HEAD KNOT
DESIGN
DESCRIPTION
PROCEDURE
LARKS HEAD LARKS HEAD KNOT
DESIGN Secure one holding cord to
your board horizontally.
DESCRIPTION
VERTICAL LARKS HEAD
PROCEDURE The Vertical Larks Head is a very popular variation
of the standard Larks Head knot. In some vintage
Macrame patterns, it is called the Buttonhole
Stitch.
LARKS HEAD VERTICAL LARKS HEAD
DESIGN
DESCRIPTION
PROCEDURE
LARKS HEAD LARKS HEAD KNOT
DESIGN Move the working cord over -
under the holding cord,
rotating counter-clockwise.
DESCRIPTION
As you pull it to the left, pass
over the secured end of the
PROCEDURE working cord to complete
the loop.
DESCRIPTION
LARKS HEAD SENNIT
Larks Head sennits can be made without a separate
PROCEDURE holding cord. This technique shows you how to
alternate between two cords, where one holds the
knot and the other is used to tie it. The knots will tilt
slightly, forming a zigzag pattern. This design is
similar to the Alternating Half Hitch.
LARKS HEAD
DESIGN
DESCRIPTION
PROCEDURE
LARKS HEAD LARKS HEAD KNOT
DESIGN Use the left working cord to
tie a Vertical Larks Head knot
onto the holding cord,
DESCRIPTION rotating counter-clockwise.
DESCRIPTION
BUTTONHOLE CLASP
This Buttonhole Clasp is a round or oval loop made
PROCEDURE
with Vertical Larks Head knots.
DESCRIPTION
PROCEDURE
LARKS HEAD LARKS HEAD KNOT
DESIGN Make the first loop for the
Vertical Larks Head by
passing the working cord
DESCRIPTION over - under the holding
cord, rotating clockwise.
Rotate counter-clockwise to
make the two loops.
LARKS HEAD LARKS HEAD KNOT
DESIGN Form the Buttonhole Clasp
by making a circle with the
knots as you bring the ends
together.
DESCRIPTION
Tie a the first half of a
Square knot with the two
PROCEDURE working cords, around the
holding cords.
Tighten it firmly.
LARKS HEAD LARKS HEAD KNOT
DESIGN Tie the second half of the
Square knot with the working
cords.
DESCRIPTION
After you tighten the knot,
pull on both ends of the
holding cord to remove the
PROCEDURE slack between the knots.
LARKS HEAD LARKS HEAD KNOT
DESIGN Make sure the button fits
through the opening, then
attach it to the other end of
the design you are making.
DESCRIPTION
You can also use a bead or
button knot to form the
PROCEDURE closure.
BUTTONHOLE
CLASP
LEADER:
Capuno, Kisses Joy M.
MEMBER:
Atienza, Roderick T. Jr.
Catapang, John Zedrick V.
Galindez, Jv C.
Mendoza, Sir Lawrence C.
Sendon, John Razel C.
Marco, Ruthalet S.
Valencia, Joyce Ann B.