Professional Documents
Culture Documents
PVC Tube Extrusion Line1
PVC Tube Extrusion Line1
Quotation
PVC 50mm-200mm pipe extrusion production line
(Ref. No.:WUHE-18.2.24)
Contact to Mr Steven Qu
Material 38CrMoAl
Mold material: 40Cr Sizing sleeve: Cu Heater: stainless steel; Mold equipped with co-extrusion die
Size Wall Wall Die Mandrel Sizing Heater Remark
thickness1 thickness2 sleeve
2”=50.8mm 1.8 2.5 1pc 2pcs 1pc 1set
3”=76.2mm 2.9 3.5 1pc 2pcs 1pc
4”=101.6mm 3.4 4.5 1pc 2pcs 1pc
Material SU304×3mm
Length 6m
Water pump 4kw×2sets(SHANGHAI YULONG)
Vacuum pump 5.5kw×1set(SHANGHAI YULONG)
Moving motor 0.75kw
Up-down adjustment ±50mm
Left-right adjustment ±30mm
Front-back adjustment ±500mm
Tank cover Toughened glass
Detailed description The sizing sleeve is installed with a small nozzle; automatic level
control; angle seat valve inlet; manual drainage; concentrated
water supply& drainage; steam-water separation; stainless steel
pipe for drainage; no volt alarm; riding wheel; stainless steel filter;
stainless steel valves
Control electrics Schneider contactor, connected by plug-in
Caterpillar quantity 3
Caterpillar effective 1600mm
length
Caterpillar effective 50mm
width
Traction power 1.1kw×3sets
Gearbox Direct connection
Speed 4m/min
PICTURES:
1. Payment term:
2. Delivery time:
SERIVCE:
1. Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
2. The customer can send the engineer to our factory for training.
3. The seller can send enough technicians to the buyer’s company for installation and testing the lines.
the cost caused by the seller’s expert in customer’s country (including round trip ticket between
China and the buyer’s country inland traffic, medical fees, lodging, dinner and so on) and the cost of
the materials of the components will be covered by the buyer, and buyer pay seller’s technicians
50USD per person per day.