Professional Documents
Culture Documents
TES Bro drx250 En-1
TES Bro drx250 En-1
Combined
probe sensor
Single rod measurement probe for
simultaneous measurement of
- Dust concentration [mg/Nm³]
- Volume flow [Nm³/h]
- Temperature [°C]
- Absolute pressure [hPa]
● Only one probe/ installation opening in ● The dust concentration is determined ● The absolute pressure in the flue gas is
the exhaust gas channel according to the triboelectric measuring measured by a pressure transmitter in one
● Compact design principle. The tribo probe measures the chamber of the probe.
● No moving parts electric charge of the impinging particles. ● The temperature is measured directly in
● Automatic zero and reference point check ● The measurement of the volume flow is ba- the centre of the flue gas flow in a separate
sed on the mechanical action principle. The chamber within the probe with a tempera-
Applications probe has two separate chambers, ture sensor.
between which a differential pressure
● For measurements in accordance with TI Air builds up under flow.
(Technical Instructions for Maintaining Air
Purity), 13., 17. and 27. BImSchV
✖ Not suitable for use behind electrostatic System components
precipitators. Please consult us
Approvals
probe transmitter differential control and
pressure evaluation unit
● Suitability-tested by the TÜV Cologne, transducer
Distributor
max. 1000 m
Options
● Automatic cyclic probe back purging for
● Weather protection cover high dust concentrations
● Switch-over cock for back purging/ zero ● Hastelloy probes for corrosive gases
point control ● Purge air connection at flange
measurements dust concentration, volume flow, digital inputs 6 potential free inputs
absolute pressure, temperature
measuring ranges 0 ... 10 ... 0 ... 500 mg/Nm³ detection limit <2% of measuring range
©DURAG GROUP 07/2016 · Subject to change without notice
DURAG GmbH Tel. +49 (40) 554 218-0 · Fax +49 (40) 584 154
Kollaustrasse 105 · 22453 Hamburg · Germany E-Mail: info@durag.de www.durag.com