Professional Documents
Culture Documents
Unidad de Servicio Tecnica On-Off Tool
Unidad de Servicio Tecnica On-Off Tool
Unidad de Servicio Tecnica On-Off Tool
Table of Contents
Introduction.................................... 1 Bonded Seal Removal Tool On-Off Tool Drawing 336-645-7,
Features/Benefits .......................... 3 Drawing 337-115...................... 9 Size 3-1/2 in. .......................... 17
Pressure and Tensile Ratings ....... 3 J-Slot Development Drawing Bonded Seal Disassembly
Specification Guide........................ 4 334-521 .................................... 9 Tools......................................... 18
Cautions and Limitations ............... 4 Dimensional Data ..................... 10 Drawing 333-441, Sizes 2-3/8 in.
TUBEMOVE Information ............... 5 Parts List................................... 11 and 2-7/8 in. ........................... 18
InQuest TUBEMOVE/Performance Seal Nipples with EU 8Rd Drawing 334-540,
Envelope Instructions.................. 5 Threads .................................. 12 Size 3-1/2 in........................... 18
Operation....................................... 5 Seal Nipples With EU 8Rd Drawing 347-637,
Drawing 334-663-2 ..................... 5 Threads, Blanked for Profile .. 12 Size 2-3/8 in........................... 19
To Disengage the Tubing............ 5 Easy-Out Washover Shoes Drawing 347-636,
To Re-Engage Tubing................. 6 (Welded) ................................ 12 Size 2-7/8 in........................... 19
Disassembly Instructions............... 6 Standardized Material Nos. ...... 13 Drawing 347-638,
Assembly Instructions.................... 6 On-Off Tool Drawing 336-645-1, Size 3-1/2 in........................... 20
L-10 and R-10 On-Off Sealing Size 2-3/8 in. .......................... 15
Connectors.................................. 8 On-Off Tool Drawing 336-645-5,
Assembly and Dimensional Data Size 2-7/8 in. .......................... 16
Drawing 334-663-00P01 .......... 8
Introduction
The L-10™ and R-10™ high performance on-off sealing connectors are designed to provide a simple
and reliable means of retrieving the production string without unseating the companion packer below. It
can be run above and anchored into a permanent production packer or on top of any retrievable packer
which will remain set without applied tubing tension or weight. A seating nipple profile is available in the
top of the seal nipple to provide a means of plugging the lower zone while the tubing is pulled. This loca-
tion of the blanking plug provides for minimum debris build-up on top of the blanking plug.
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document is the property
of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent with the
purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in conjunction with equipment or product.
© 8/6/12 Baker Hughes Incorporated.
WARNING
Use of Baker Hughes equipment contrary to
manufacturer’s specifications may result in
property damage, serious injury or fatality.
Drawing 334-663
TUBEMOVE Information
Tool
On-Off Tool Seal Diameter Check tool or coupling directly below seal nip-
Size (in.)
ple that it has clearance for washover shoe stroke.
2.375 2.656
If tool below on-off tool is larger than dimension Z
2.875 3.149
or shorter than dimension X, as shown in Drawing
3.500 3.995
334-663, then on-off tool may not operate. Either
the tool below must be modified according to di-
InQuest TUBEMOVE/Performance mensions Z and X or a short pup joint must be run.
Envelope Instructions
Warning:
Run inQuest TUBEMOVE calculations in an- Tool string makeup procedures on the rig floor
chored condition. Enter on-off tool seal diameter often duplicate the sequence required to un-jay
(Refer to TUBEMOVE Information table shown in the washover shoe from the seal nipple of the
on-off tool. Extreme care should be taken when
this unit) as packer bore in InQuest TUBEMOVE making up the tool string to the tubing on the
program. Compare with the appropriate rating en- rig floor to ensure the on-off sealing connector
velope contained in this unit. rating envelopes in does not accidentally disengage. It is advisable
this unit are based on safe tensile limit and not ul- to have the on-off tool shear pinned during
timate tensile limit. makeup on the rig floor. All or part of the shear
screws can be removed prior to running in the
hole if desired.
Operation
NOTE: During retrieval it should always be assumed
Prior to running check to ensure the washover the shear screws have sheared and care should be
shoe is fully engaged on the seal nipple, and verify taken during breakout and lay down of the tool string to
the number of shear screws compared with the an- prevent accidental disengagement of the washover
ticipated available shear force. Each brass screw shoe from the seal nipple.
shears at 2,380 ± 15%. Shear screws are recom- To Disengage the Tubing
mended to prevent accidental disengagement of
the on-off tool during makeup and run in of the tool Unloading Pressure
string. It is recommended that the pressures across
If running an on-off sealing connector with an F the tool be equalized prior to disengaging the tub-
profile, check that the end of the EU 8Rd pin thread ing. The bonded seal may be unloaded against
G (max) N/A 5.500 6.250 7.250 8.125 N/A 6.250 7.250 8.125 N/A 7.250 8.125
J 7.46 8.39 8.59
K 13.60 15.00 14.95
L 21.47 23.91 24.82
M (min) 2.22 2.47 2.97
N (max) 3.310 3.950 4.870
X (min) 0.75 0.75 1.25
Y 2.59 2.90 3.42
Z (max) 3.350 3.688 4.930
L-10 and R-10 On-Off Sealing Connectors
or sold, either alone or in conjunction with equipment or product. © 8/6/12 Baker Hughes Incorporated.
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
Parts List
Refer to Drawing 334-663-00P01.
Size (in.) and Material
Qty.
Item Description 2-3/8 2-7/8 3-1/2
Req’d
(with EU 8Rd) (with EU 8Rd) (with EU 8Rd)
1 Top Sub (- 41XX) 1 H033445700 H033431600 H033444000
Bonded Seal H035769501 H034508300 H034508400
THIS DOCUMENT IS FOR INTERNAL USE ONLY
2 1
Nonelastomeric Seal Stack H033589000 H033589100 H033589200
3.75-in. OD
H035412800
Left-hand Washover Shoe
N/A
3.75-in. OD
H035455300
Right-hand Washover Shoe
4.5-in. OD
H035432100 H035465600
Left-hand Washover Shoe
N/A
4.5-in. OD
H035420900 H035469100
Right-hand Washover Shoe
3 1
5.5-in. OD
H035468900 H033347700
Left-hand Washover Shoe Use 4.5-in. OD
5.5-in. OD shoe with guide
H035469200 H033458900
Right-hand Washover Shoe
5.88-in. OD
H033347800
Left-hand Washover Shoe
N/A
5.88-in. OD
H033459000
Right-hand Washover Shoe
HWWGE1B0MB
4 Brass Shear Screw 4*
Rev. New
(5/16–18×5/8)
5 Seal Nipple 1 Refer to separate parts list
5.5-in. Guide H033559001 N/A
N/A
6.25-in. Guide H033559101 H033563401
6 1**
7.25-in. Guide H033559201 H033563501 H033567601
8.125-in. Guide H033559301 H033563601 H033567701
Unit No. SU 4451
**Guides for 2-3/8-in. size can only be used with 4.5-in. OD washover shoes; Guides for 2-7/8-in. size can only be used with 5.5-in. OD washover shoes; Guides
for 3-1/2-in. size can only be used with 5.88-in. OD washover shoes.
L-10 and R-10 On-Off Sealing Connectors
Page 12 of 20
June 29, 2012
Unit No. SU 4451
Seal Nipples with EU 8Rd Threads
Size (in.) Profile Material Material
1.87 F H033445800
1.81 F H033445803
1.78 F H033445806
2-3/8
1.78 R H033592600
Rev. New
1.87 X H033597700
THIS DOCUMENT IS FOR INTERNAL USE ONLY
2.31 X H033588000
2.377 blank ID H033635100
2.81 F H033444100
3-1/2 2.81 X H033597900
2.942 blank ID H033635200
X profiles are Baker Hughes manufactured profiles for Otis® X® lock mandrels.
H684201802
1.87 X
Chevron H684201804
1.930 blank ID H684201900
3.75-in. 1.87 F EU 8 Rd H684211800
Bonded
(right-hand) 1.81 F H684211700
H684202800
1.87 F
Chevron H684202801
1.81 F H684202700
1.78 F H684202500
Bonded
1.78 R H684202501
2-3/8
4.5-in. H684202803
(left-hand) Chevron H684202802
Bonded H684202804
1.87 X New VAM
Chevron H684202805
Bonded H684202806
41XX RTS-8
Chevron H684202807
1.930 blank ID H684202900
4.5-in. 1.87 F H684212800
(right-hand) 1.81 F H684212700
1.87 F H684203800
5.5-in.
1.81 F H684203700
(left-hand) Bonded
Rev. New
1.78 F H684203500
1.87 F H684204000
6.25-in.
1.87 X H684204001
(left-hand)
1.930 blank ID H684204002
2.31 F EU 8 Rd H684205300
Chevron H684205302
4.5-in. 2.25 F H684205200
Unit No. SU 4451
2-7/8
2.377 blank ID H684205400
H684205800
2.31 F
5.5-in. Chevron H684205801
(left-hand) 2.25 F H684205700
Bonded
1.87 F H684205601
Chevron seal is nonelastomeric seal stack.
L-10 and R-10 On-Off Sealing Connectors
Page 14 of 20
June 29, 2012
Unit No. SU 4451 Standardized Material Nos. (Continued)
Top Sub and
Size (in.) Shoe OD (in.) Profile Seal Thread Material
Seal Nipple
Bonded H684206405
EU 8 Rd
Chevron H684206400
Bonded H684206406
5.5-in. 2.31 X New VAM
Chevron H684206407
(left-hand)
Rev. New
Bonded H684206408
RTS-8
THIS DOCUMENT IS FOR INTERNAL USE ONLY
Chevron H684206409
2-7/8
2.377 blank ID H684205901
5.5-in. 2.31 F H684215800
(right-hand) 2.31 X H684216400
Bonded EU 8 Rd
2.31 F H684206000
6.25-in.
or sold, either alone or in conjunction with equipment or product. © 8/6/12 Baker Hughes Incorporated.
with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned
Hughes on request and may not be reproduced, used or disclosed to persons not having a need to know consistent
revealed for limited purposes only. This document is the property of Baker Hughes and is to be returned to Baker
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is
2.31 X H684206001
(left-hand)
2.377 blank ID H684206002
41XX
Bonded H684206800
2.81 F
Chevron H684206802
EU 8 Rd
Bonded H684206801
Chevron H684206803
5.5-in
Bonded H684206804
(left-hand) 2.81 X New VAM
Chevron H684206805
3-1/2
Bonded H684206806
RTS-8
Chevron H684206807
2.942 blank ID H684206900
Bonded
H684207100
7.25-in. 2.81 F EU 8 Rd
Chevron H684207102
(left-hand)
2.942 blank ID Bonded H684207103
Chevron seal is nonelastomeric seal stack.
RTS-8 is a Baker Hughes premium thread interchangeable with Hydril® CS®.
X profiles are Baker Hughes manufactured profiles for Otis® X® lock mandrels.
L-10 and R-10 On-Off Sealing Connectors
On-Off Tool Drawing 336-645-1, Size 2-3/8 in.