Professional Documents
Culture Documents
Colo-Re Tec Eng
Colo-Re Tec Eng
Colo-Re Tec Eng
COLO-RÈ
Coloured revitalising sealer for concrete
Description
COLO-RÈ is a solvent-based product developed to renovate and colour concrete
surfaces. It is particularly suitable for stamped/imprinted and decorative floors.
Features
• Easy application
• Matt (opaque) and veiled effect
• It can be applied on Ideal Sealer (solvent-based acrylic resin) without prior sanding.
• High yield
• Spray applied
Fields of Use
• Refreshes and renews the colour of old concrete surfaces
• Protects concrete surfaces from UV rays, abrasion and stains.
• Diluted with Ideal Sealer Medium, it gives the surface coloured glazes and shades.
• Can be used to change the colour of existing concrete horizontal surfaces.
Application
Preparation
The application must only take place on concrete surfaces that are completely dry and free
of, oil, grease, paints, waxes and any other product that can inhibit penetration and
adhesion to the surface including anti-evaporation membranes (CURING) that are not
compatible with Ideal Sealers
COLO-RÈ should never be applied in the event of rain or when rain is expected within 3
hours.
Application
COLO-RÈ can be applied undiluted with a covering effect to radically change the colour of
the slab or to cover existing stains
Normally COLO-RÈ is used diluted with Ideal Sealer Medium to revive the colour, create
new shades or give an antiqued effect to an old concrete floor.
For example:
Technical Information
COLO-RÈ is available to order in colours from the NCS chart for a minimum quantity of 5 L.
Consumption
Approximately 100 g of mixture per m2. The consumption of COLO-RÈ depends on the
dilution ratio and substrate density/absorption capability.
Precautions
COLO-RÈ can only be used on concrete or cementitious materials. It must never be used in
areas subject to the constant presence of water, aggressive chemical exposure, abrasion,
rubbing or passage of metal wheels.
The product is flammable. Avoid contact with skin, mucous membranes, eyes etc. In case of
accidental contact, wash thoroughly with soap and water and consult a doctor. The use of
protective masks and gloves is recommended. In closed rooms, provide good ventilation
and avoid inhalation of vapours.
Consult the safety data sheet.
IMPORTANT
All information contained herein is based on the best and most recently available practical and laboratory testing. It is the customers
responsibility to determine that the product is suitable for their chosen application. The manufacturer assumes no responsibility for the results
of incorrect applications. You should always test on a small area before full scale application. This document replaces all previous versions. The
data can be changed at any time. Also note that the products are intended for professional use only. Ideal Work provides training, updates and
refresher courses for their regular customers on request. Anyone using these products without being enabled does so at their own risk.
EDITION01 dated 10.06.2017 - Rev. 02 dated 07.04.2020