Professional Documents
Culture Documents
Adidas FT-08 Courtauld Test
Adidas FT-08 Courtauld Test
FT-08
Courtauld Test
Index Update – Courtauld Test FT-08
Update Date Changed Items
17.11.06 Specimen size 100 x 37.5 mm added.
16.03.07 Amount of test specimens reduced.
22.09.07 Waiting time between taking the stand out of the oven and evaluation
precised
17.10.07 After feedback from Asia, waiting and evaluation was re-adjusted once
again
19.08.08 Purchasing address for Perspiration stand added
NOTE... This test must not be used on dark colours like black, brown or coffee
Apparatus
Courtauld test equipment kit including
Glass plates size 100mm x 40mm
Test paper size 100mm x 75mm
NOTE…. Once the delivered test paper package is opened the supplier guarantees
accurate results for three (3) month
Test Procedure
1. Fold the test paper in half along its width axis so that the end measurement of the paper is 50
x 75 mm or length axis 100 x 37, 5 mm to get the size of the specimen.
2. Insert the material sample between the layers of the paper. For synthetic material Place the
sandwich (= material + test paper) between two glass plates (5 sandwiches plus control fabric
is the highest amount which can be done in one test).
NOTES …
The BHT free PE film shall only be used once, that means every new test must use
a new film
When textile packages are tested during incoming inspection, the package must be
delaminated before testing and each single textile must be tested separately
Evaluation
Check visually if the control fabric is yellow, if so the test is successful.
Check the intensity of the yellowing by using the grey scale for colour change.
For synthetic material both check if the backer or the surface became yellow on materials with
knitwear and woven backer.
For Synthetic material with non woven backer only the surface is evaluated.
Purchasing Addresses