Professional Documents
Culture Documents
JEE 2023 Full Length Revision Test - 2 - Paper
JEE 2023 Full Length Revision Test - 2 - Paper
General Instructions
1. The test is of 3 hours duration and the maximum marks is 300.
2. The question paper consists of 3 Parts (Part I: Physics, Part II: Chemistry, Part III: Mathematics). Each Part has
two sections (Section 1 & Section 2).
3. Section 1 contains 20 Multiple Choice Questions. Each question has 4 choices (A), (B), (C) and (D), out of
which ONLY ONE CHOICE is correct.
4. Section 2 contains 5 Numerical Value Type Questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer. If the answer is a decimal numerical value,
then round-off the value to TWO decimal places. If the answer is an Integer value, then do not add zero in the
decimal places. In the OMR, do not bubble the sign for positive values. However, for negative values, Θ sign
should be bubbled. (Example: 6, 81, 1.50, 3.25, 0.08)
Marking Scheme
1. Section – 1: +4 for correct answer, –1 (negative marking) for incorrect answer, 0 for all other cases.
2. Section – 2: +4 for correct answer, 0 for all other cases. There is no negative marking.
Roll Number :
SECTION-1
This section contains 20 Multiple Choice Questions. Each question has 4 choices (A), (B), (C) and (D), out of which
ONLY ONE CHOICE is correct.
1. A block of mass m is at rest on a smooth horizontal surface under the application of a constant force F0 .
A small particle of mass m moving with velocity u0 hits the block and gets embedded in it. What will be
the frequency & amplitude of oscillation of the block?
1 k m 1 k 2m
(A) , u0 (B) , u0
2 2m k 2 2m k
1 2k m 1 k m
(C) , u0 (D) , u0
2 m k 2 2m 2k
2. A quarter portion is removed from a uniform disc of radius R as shown. Mass of the remaining disc is M.
Moment of inertia of the system about the axis shown is:
4 MR 2 3MR 2 MR 2 MR 2
(A) (B) (C) (D)
3 4 4 3
3. A particle of mass m1 2kg moves with speed u1 and collide head on with a stationary particle of mass
m2 1 kg . If the first particle continues to move in the same direction then coefficient of restitution e :
2 1 1 2
(A) e (B) e (C) e (D) Not possible
3 2 2 3
4. A spherical soap bubble (surface tension = T) encloses n moles of a monoatomic ideal gas. The gas is
3nR
heated slowly so that the surface area of the bubble increases by per unit increment in temperature.
2T
The specific heat for this process is:
5R 7R 9R 3R
(A) (B) (C) (D)
2 2 2 2
5. A listener x hears a sound level of 50 dB when he is at a distance 1 km from the instrument. Another
listener y at a distance 10 km from the instrument hears a sound level of:
(A) 5dB (B) 10 dB (C) 20 dB (D) 30 dB
6. A large wall is moving away from a stationary sonic source with a velocity v. The source emits sound of
constant frequency f. The beat frequency registered by a person standing still between the wall & source
will be. [Speed of sound = c]
2vf vf
(A) 2vf (c v) (B) vf (c v ) (C) (D)
cv cv
x2
7. A parabolic smooth wire frame of equation y is fixed inside water as shown. A small bead of
4
specific gravity 0.5 is threaded on wire is kept at the origin at rest. When it is pushed gently towards +ve
x-axis it moves on the wire frame. Velocity of the ball when it reaches the surface of water is:
y y y y
(A) F1 1 F2 (B) F1 F2 1
L L L
L
y y y y
(C) F1 1 2 F2 (D) F1 1 F2
L L L L
17. In the following arrangement, what is the acceleration of m1 just after thread xy is burnt?
[m1 2 kg ; m2 5kg ]
3g 3g
(A) zero (B) upwards (C) upwards (D) Depends on value of k
2 7
18. A particle is moving on a circular path of radius r such that its speed varies with time as v kt where k is
a positive constant. Choose the correct statement.
(A) Initial acceleration of the particle is zero
(B) Angle between acceleration & velocity vector of the particle decreases with time
(C) Angle between acceleration & velocity vector of the particle is never 90º
(D) Acceleration of the particle is constant
19. An L shaped rod is hanging from one end from ceiling. Value of force F required to keep it in the
position shown.
Mg 3Mg
(A) (B) Mg (C) 2Mg (D)
2 2
14 R 28 R 12 R
(A) 8R (B) (C) (D)
5 5 5
SECTION-2
This section has Five (05) Questions. The answer to each question is a NUMERICAL VALUE. For each question, enter
the correct numerical value of the answer. If the answer is a decimal numerical value, then round-off the value to
TWO decimal places. If the answer is an Integer value, then do not add zero in the decimal places. In the OMR, do
not bubble the sign for positive values. However, for negative values, Θ sign should be bubbled.
(Example: 6, 81, 1.50, 3.25, 0.08)
21. A rod follower AB is subjected to a vertical up and down movement while resting on the circular contour
of radius 0.5 m of a cam. The cam moves to the right with a velocity of 4 cm/s. What is the velocity of
end B of the rod at the instant shown (in cm/s). O is the center of circular contour.
22. Two blocks of masses m 10 kg each are connected by a spring having spring constant k 80 N /m .
Initially spring is in its natural length. The coefficient of friction between the blocks and the surface is
0.08. What minimum constant force (in Newton) has to be applied in the horizontal direction to one of
the blocks in order to shift the other block.
23. A cylinder of mass 5 kg and radius 1m is falling under gravity as the thread is unfolding. What is the
tension (in N) in string?
24. A compound bar 2m long is made of a solid copper core 1 cm in diameter surrounded by a steel casing
whose outer diameter is 2 cm. The outer surface of the bar is thermally insulated and one end is
maintained at 100ºC, the other end is at 0ºC. Find total heat current [in cal/s] through the bar. Thermal
conductivity for copper & steel is 0.9 cal s–1 cm–1 ºC–1 & 0.12 cal s–1 cm–1 ºC–1respectively.
25. P V diagram of a cyclic process performed on one mole of a monoatomic gas is shown. During
process ABC, heat is observed by system till point B and after point B system rejects heat. Find
percentage efficiency of the cycle.
SECTION-1
This section contains 20 Multiple Choice Questions. Each question has 4 choices (A), (B), (C) and (D), out of which
ONLY ONE CHOICE is correct.
1. A system confined in a rigid, well-insulated container undergoes a spontaneous change. What statement
about the system must be true ?
(A) Its Gibbs free energy increases during the change
(B) Its Gibbs free energy decreases during the change
(C) Its entropy increases during the change
(D) Its entropy decreases during the change
2. A metal M forms a sparingly soluble sulfate salt. The logarithm of the concentration of the dissolved
metal ion in a solution saturated in the metal sulfate is plotted below as a function of the logarithm of the
concentration of sulfate ion in solution. What is the formula of the metal sulfate ?
(A) II > III > I > IV (B) IV > II > I > III
(C) III > IV > I > II (D) IV > I > III > II
4. Which of the following compounds could not be prepared by oxidizing phosphorus trifluoride, PF3 ?
(A) Na 4 P2 O7 10H 2 O (B) H 4 P2 O6
(C) KPF6 (D) (NH 4 )2 HPO3 H 2 O
5. What is the valence shell electronic configuration of chlorine atom in potassium perchlorate (KClO 4 ) ?
[Atomic number Cl 17]
(A) 2s 2 2p 6 (B) 3s1 3p6 (C) 3s 2 3p5 (D) 3s1 3p5
6. Which of the following molecules is the most polar?
(A) SF6 (B) SnCl4 (C) XeF4 (D) TeCl 4
(A) (B)
(C) (D)
SECTION-2
This section has Five (05) Questions. The answer to each question is a NUMERICAL VALUE. For each question, enter
the correct numerical value of the answer. If the answer is a decimal numerical value, then round-off the value to
TWO decimal places. If the answer is an Integer value, then do not add zero in the decimal places. In the OMR, do
not bubble the sign for positive values. However, for negative values, Θ sign should be bubbled.
(Example: 6, 81, 1.50, 3.25, 0.08)
21. How many isomers including stereoisomers are possible for dimethyl cyclopentane?
22. Air in open vessel at 25°C is heated so that one third of air measured at final temperature escapes out.
What is final temperature in degree Celsius? [Use 0C 273K]
23. Calculate the volume of 3.0 M HCl in mL needed to decompose 0.76 g of a rock sample. Assume that the
sample is pure mineral dolomite CaMg(CO3 ) 2 and you need 10% excess of the acid.
[Atomic mass: C 12, O 16, Mg 24, Ca 40]
24. Given the following standard enthalpies of formation: CO 2 (g), 394 kJ / mol; H 2 O(), 286 kJ / mol;
C 4 H8 (g), 16.0 kJ / mol. Calculate the heat of combustion of one mole of C 4 H8 in kJ if the equation
describing the process is: C 4 H 8 (g) 6O 2 (g)
4CO 2 (g) 4H 2 O()
25. A 20.0 liter vessel initially contains 0.50 mole each of H 2 and I 2 gases. These substances react and
finally reach an equilibrium condition. Calculate the equilibrium concentration of HI in mol L1 if
SECTION-1
This section contains 20 Multiple Choice Questions. Each question has 4 choices (A), (B), (C) and (D), out of which
ONLY ONE CHOICE is correct.
1. If the quadratic equation ax 2 bx 6 0 does not have Real roots and b R , then :
b 2 b 2
(A) a max , b 6 (B) a max , b 6
24 24
b 2 b 2
(C) a min ,b 6 (D) a min ,b 6
24 2a
2. If tan A, tan B, tanC are the roots of the cubic equation x 3 7 x 2 11 x 7 0 , then A B C equals
to:
(A) π/2 (B) π (C) 3π / 4 (D) None of these
3 5 7
3. 1 cos 1 cos 1 cos 1 cos is equal to :
8 8 8 8
1 1 1 2
(A) (B) cos (C) (D)
2 8 8 2 2
4. ABCD is a rectangle in the clockwise direction. The coordinates of A are (1, 3) and C are (5, 1), vertices
B and D lie on the line y 2 x c , then the coordinates of D are :
(A) (2, 0) (B) (4, 4) (C) (0, 2) (D) (2, 4)
5. Consider points A (3, 4) and B (7, 13). If P be a point on the line y = x such that PA PB is minimum,
then coordinates of P are :
12 12 13 13 31 31
(A) , (B) , (C) , (D) (0, 0)
7 7 7 7 7 7
6. A straight line L through the point 3, 2 is inclined at an angle 60 to the line 3 x y 1 . If L also
intersects the x-axis, then the equation of L is :
(A) y 3x 2 3 2 0 (B) y 3x 2 3 3 0
(C) 3y x 3 2 3 0 (D) 3y x 3 2 3 0
7. Consider a point A (1, 0), which undergoes following transformation successively :
I. Translation through a distance 4 units along the positive direction of x-axis, say point B.
II. Reflection about the line y = x – 1, say point C.
III. Translation through a distance 1 unit along the negative direction of x-axis, say point D.
IV. Rotation through an angle π/ 4 about the origin in anticlockwise direction, say point E.
What is the co-ordinates of the point E at the final position?
3
(A) 2 2, 2 (B) 2, 3 (C) 2 2, 2 2 (D) , 2
2
(A) n
Cr 3r 2n (B) n
Cr 3n r 2n r (C) n
Cr 3r 2n r (D) None of these
12. The least distance between two points P and Q on the circle x 2 y 2 8 x 10 y 37 0 and
x 2 y 2 16 x 55 0 is :
(A) 5 units (B) 8 units (C) 5 5 units (D) None of these
14. Tangents are drawn to x 2 y 2 1 from any arbitrary points P on the line 2 x y 4 0 .
The corresponding chord of contact passes through a fixed point whose coordinates are
1 1 1 1 1 1
(A) , (B) , 1 (C) , (D) 1,
4 2 2 2 4 2
6
2 k 2 k
15. The value of S sin 7
i cos
7
is :
k 1
(A) –1 (B) 0 (C) i (D) i
16. If , are the roots of x 2 px q 0 , and is a cube root of unity, then value of
is :
2 2
3 3 x2 y2
18. If normal at P(2, ) meet the major axis of ellipse 1 at Q and S and S are foci of given
2 16 9
ellipse then SQ : SQ is:
8 7 4 7 8 7 4 7
(A) (B) (C) (D)
8 7 4 7 8 7 4 7
19. In a geometrical progression, first term and common ratio are both
1
2
3 i . Then the modulus of the
SECTION-2
This section has Five (05) Questions. The answer to each question is a NUMERICAL VALUE. For each question, enter
the correct numerical value of the answer. If the answer is a decimal numerical value, then round-off the value to
TWO decimal places. If the answer is an Integer value, then do not add zero in the decimal places. In the OMR, do
not bubble the sign for positive values. However, for negative values, Θ sign should be bubbled.
a
22. If 0 x and sin 2 sin x cos 2 cos x then tan x cot x C
where a, b, c are positive
2 b
integers then a b c ____________.
10
23. If 1 2 x 3 x 2 a0 a1 x a2 x 2 ..... a20 x 20 , then a1 equals ___________.
k
C is ___________.
1
24. The value of 3k
k
r
k 1r 0
25.
The number of such points a 1, 3 a , where a is any integer, lying completely inside the region
bounded by the circles x y 2 x 3 0 and x 2 y 2 2 x 15 0, is __________.
2 2