Offer of Air Cooled Chiller For 13th Building 6th Floor - COTTON CLUB-09.04.2023 PDF

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

QUOTATION FOR SUPPLY, INSTALLATION, TESTING & COMMISSIONING

OF CENTRAL AIR CONDITIONING SYSTEM


PROJECT: MONDOL COTTON CLUB LTD.
Schedule - A : Supply Of Imported Items
Supply of Imported Items Local supply & Labour
Rate (in USD) Rate (in Taka)
Sl. No. Short Description of Items Unit Qty.
SUPPLY RATE TOTAL SUPPLY LABOUR TOTAL AMOUNT
(USD) AMOUNT (USD) AMOUNT (TK) (TK)

1.0 Air Cooled VFD Type Screw Chiller Capacity: 100 RT set 1 69,000.00 69,000.00 25,000.00 25,000.00
Air cooled VFD Type screw Single compressor type chiller
having capacity of 87.7 RT and to cool 53.4 m3/hr of water from
12°C to 7°C. unit control panel shall have microprocessor control
factory wired and tested. The unit shall be complete with
refrigerant filter with service valves, spring isolator, flow switch,
power panel with incoming MCCB, high-low voltage protection,
high-low pressure cutout, sequential auto start stop system, .
Power supply shall be 380 / 50Hz/ 3 Phase. Refrigerant-R134a

Model: ACHX-B 90S


Brand : DUNHAM-BUSH
Country of origin : USA
Manufacture & Shipment From: Malaysia.

2.0 SUPPLY OF WATER CIRCULATION PUMPS


Supply of end suction and vertical discharge centrifugal pump as
per following capacities and specification. The pump is completed
with interally coupled electrical motor of appropiate capacity,
flexible coupling, support base etc. The pump and pump motor
shall be outdoor type and properly trivialized. The supply power
is 400 ±5%V/3PH/50Hz.

Brand : Euroflo
Country of Origin: Singapore
Country of Manufacturing & Shipment: Malaysia

2.1 CHILLED WATER PUMP sets 2 2,800.00 5,600.00 5,000.00 10,000.00


Flow Capacity: 60 m3/hr
Total Head : 20 M
RPM : 1450
Efficiency: 71 %
VFD Motor :7.5 KW
One No Standby.
Model: EU 65 - 26
3.0 VFD INVERTER FOR WATER CIRCULATION PUMPS Nos 2 520.00 1,040.00 2,000.00 4,000.00
Supply of VFD Inverter for Chilled Water pumps of following
capacity.
Brand :iAstar
Country of Origin: China
Capacity: 7.5 kW
3.0 Fan Coil Unit (Indoor Unit)
3.1 FAN COIL UNITS :(CEILING CONCEALED DUCTED TYPE):
Fan coil units shall be ceiling mounted ducted type complete with
fan, fan motor, cooling coil, washable filter. The units shall be
complete with insulated enclosure, hangers, wall mounted
temperature and fan speed controller . The fan shall have the
capacity at medium speed of the fan. The units shall have 3 row
coil depth as mentioned and have the following capacities at
chilled water entering the coil at 7.5°C and leaving the coil at
12.5°C. Power supply shall be 220V/1Ph/50Hz.
Fan Coil Units shall be ceiling mounted ducted type.
The fan coil units shall have the capacity to cool air from 80.00°F
DB/ 69.00°F WB and leaving the coil at 52.00°F DB/ 51.00°F WB

Brand : DUNHAM-BUSH
Country of origin : USA
QUOTATION FOR SUPPLY, INSTALLATION, TESTING & COMMISSIONING
OF CENTRAL AIR CONDITIONING SYSTEM
PROJECT: MONDOL COTTON CLUB LTD.
Schedule - A : Supply Of Imported Items
Supply of Imported Items Local supply & Labour
Rate (in USD) Rate (in Taka)
Sl. No. Short Description of Items Unit Qty.
SUPPLY RATE TOTAL SUPPLY LABOUR TOTAL AMOUNT
(USD) AMOUNT (USD) AMOUNT (TK) (TK)

3.2 Cooling Capacity: 3.0 RT Set 13 428 5,564.00 1500 19,500.00


Air Flow: 1200 cfm,
Model: CR127E3DXEP
3.3 Cooling Capacity: 2.5 RT Set 12 362 4,344.00 1500 18,000.00
Air Flow: 1000 cfm,
Model: CR087E3DXEP
3.4 Cooling Capacity: 2.0 RT Set 8 340 2,720.00 1500 12,000.00
Air Flow: 800 cfm,
Model: CR087E2DXEP
3.5 Cooling Capacity: 1.5 RT Set 1 214 214.00 1500 1,500.00
Air Flow: 600 cfm,
Model: CR047E2DXEP

3.6 Fresh Air Fan Coil Unit


Cooling Capacity: 4.0 RT Set 2 450 900.00 1500 3,000.00
Air Flow: 800 cfm,
Model: CR06HCP3
4.0 Air Terminal:
Brand: Wattson
Country of Origin: Bangladesh

4.1 Supply of Linear Type Air Diffuser


Supply of linear type supply air diffuser made of extruded
aluminium.
Neck Size: 150 mm X 1000 mm sets 34 4,560.00 155,040.00

4.2 Supply of Air Diffuser (For Fresh Air Supply)


Supply of Air Diffuser (For Fresh Air Supply) made of extruded
aluminium.
Neck Size: 150 mm X 150 mm sets 19 550.00 10,450.00
4.3 Return Air Grille
Supply of Return air Grille made of extruded aluminium.
Neck Size: 150 mm X 1000 mm sets 34 4,560.00 155,040.00

9.0 Fresh Air Louver With Insect Screen


Supply, fabrication & installation of wall mounted fresh air
louvers with G4 filter shall be constructed with 18 SWG
galvanized sheet steel of approved colour suitable to protect
intrusion of rain water. The each louver shall be complete with
adjustable volume control damper, aluminium bird screen and all
other accessories.
Neck Size: 500 mm X 200 mm. set 2 2,560.00 5,120.00

10.0 CHILLED WATER LINE VALVE ACCESSORIES


Brand : Fivalco or Equivalent
Country of Origin: Malaysia

10.1 GATE VALVE/Butterfly Valve


Butterfly, Gate valve body shall be cast iron, purple spray painted.

100 mm dia Sets 4 120.00 480.00 1,000.00 4,000.00


80 mm dia Sets 4 85.00 340.00 1,000.00 4,000.00
QUOTATION FOR SUPPLY, INSTALLATION, TESTING & COMMISSIONING
OF CENTRAL AIR CONDITIONING SYSTEM
PROJECT: MONDOL COTTON CLUB LTD.
Schedule - A : Supply Of Imported Items
Supply of Imported Items Local supply & Labour
Rate (in USD) Rate (in Taka)
Sl. No. Short Description of Items Unit Qty.
SUPPLY RATE TOTAL SUPPLY LABOUR TOTAL AMOUNT
(USD) AMOUNT (USD) AMOUNT (TK) (TK)
10.2 BALL VALVE
Bronze body screwed type with Brass ball and steam
20 mm dia (Pressure Gauge) Sets 6 10.00 60.00 500.00 3,000.00
20 mm dia (Drain Line) Sets 1 10.00 10.00 500.00 500.00
25 mm dia Sets 30 15.00 450.00 500.00 15,000.00
20 mm dia Sets 42 10.00 420.00 500.00 21,000.00
10.3 Y-STAINER
Strainer shall be 40 Mesh, screwed cover, Y-pattern body,
stainless steel screen and flanged end type.
80 mm dia Sets 2 95.00 190.00 1,000.00 2,000.00
25 mm dia Sets 15 20.00 300.00 500.00 7,500.00
20 mm dia Sets 21 15.00 315.00 500.00 10,500.00
10.4 CHECK VALVE
Check valve shall be re-grindable seat scrwed cap, lift type disc
(vertical line), integral seal and flange end type.
80 mm dia Sets 2 220.00 440.00 1,000.00 2,000.00
10.5 FLEXIBLE JOINT
Flexible joint shall be suitable to absorb sock and system
hammering and to reduce vibration transmission. Flexible joint
shall be molded neoprene or butyl and suitable to withstand
chilled water pressure & temperature. Flexible joint shall be
sperical shape.
100 mm dia Sets 2 120.00 240.00 1,000.00 2,000.00
80 mm dia Sets 4 75.00 300.00 1,000.00 4,000.00
25 mm dia Sets 30 30.00 900.00 500.00 15,000.00
20 mm dia Sets 42 25.00 1,050.00 500.00 21,000.00
10.6 AUTO AIR-VENT VALVE
Automatic vent valves shall be free floating type having test
cock,0.7" threaded outlet to accpet drain line and threaded inlet
connection. Vent valve shall be 0.75" size
20 mm dia Sets 6 75.00 450.00 1,000.00 6,000.00

10.7 METERING DEVICES


o
Thermometer (0 - 50 C) Sets 2 30.00 60.00 500.00 1,000.00
Pipe Thermometer shall be mercury tube straight type with
thermometer well, socket, etc. Thermometer shall be suitable to
read water temperature of range 0 - 50 degC. Scale casing shall be
made of aluminium and stem shall be made of stainless steel.
Protection shall be of IP65.

2
10.8 Pressure Gauge (dial type) 0 - 15 kg/cm Sets 6 25.00 150.00 500.00 3,000.00
Pressure Gauge shall be burdon type with 4" dia and suitable to
read 0 to 16 kg/sq.cm. Pressure gauge shall be complete with ball
valve, pet cock, pressure snobber, nipple, etc. The casing & socket
shall be made of stainless steel, lens of polycarbonate with IP65
protection.
10.9 2-WAY SOLENOID VALVE FOR FCU CONTROL
Electric operated 2-way type solenoid valve shall be single seated,
straight through, globe body, normally close type (spring loaded),
high lift plug, flanged end type with companion flanges. The valve
shall be complete with sensor, digital thermostate etc.

BRAND: Johnson Control


Country of Origin : USA
Shipment from: Malaysia
25 mm dia Sets 15 160.00 2,400.00 500.00 7,500.00
20 mm dia Sets 21 140.00 2,940.00 500.00 10,500.00
QUOTATION FOR SUPPLY, INSTALLATION, TESTING & COMMISSIONING
OF CENTRAL AIR CONDITIONING SYSTEM
PROJECT: MONDOL COTTON CLUB LTD.
Schedule - A : Supply Of Imported Items
Supply of Imported Items Local supply & Labour
Rate (in USD) Rate (in Taka)
Sl. No. Short Description of Items Unit Qty.
SUPPLY RATE TOTAL SUPPLY LABOUR TOTAL AMOUNT
(USD) AMOUNT (USD) AMOUNT (TK) (TK)

11.0 PIPE WORKS:


11.1 PRE-INSULATED PIPE (FOR CHILLED WATER LINE):
40 to 45Kg/m3 density PU Pre-insulated pipe shall be black steel
pipe with insulation and galvanized sheet metal cladded vapor
barrier. Pipe shall be suitable to withstand a test pressure of
360psi. Pipe shall be of following nominal dia.
Brand : Wattson
Country of Origin : Bangladesh
Chilled Water Pipe Line
Dia: 20 mm(PU Thick: 25mm) rft 530 396.00 209,880.00
Dia: 25 mm (PU Thick: 25mm) rft 870 486.00 422,820.00
Dia: 32 mm dia (PU Thick: 25mm) rft 110 670.00 73,700.00
Dia: 40 mm dia (PU Thick: 25mm) rft 40 710.00 28,400.00
Dia: 50 mm dia (PU Thick: 25mm) rft 60 907.00 54,420.00
Dia: 65 mm dia (PU Thick: 32mm) rft 100 1,223.00 122,300.00
Dia: 80 mm dia (PU Thick: 40mm) rft 156 1,644.00 256,464.00
Dia: 100 mm dia.(PU Thick: 40mm) rft 315 2,407.00 758,205.00
Dia: 150 mm dia.(PU Thick: 40mm) rft 12 4,111.00 49,332.00

12.0 For Condensate Drain Pipe Line with Insulation


Supply, installation of PVC pipes of following sizes complete with
bends, tee, elbow, reducer, socket, union, etc as per requirement.
Pipe work shall be complete with hangers, brackets, supports, etc.

Brand: RFL/ BRB


Country of Origin: Bangladesh
20 mm dia rft 600 82.00 49,200.00
25 mm dia rft 30 104.00 3,120.00
32 mm dia rft 80 131.00 10,480.00
40 mm dia rft 35 164.00 5,740.00
50 mm dia rft 50 214.00 10,700.00

13.0 DUCT WORK:


Fabrication and installation of galvanized sheet steel ductwork
complete with bends, tees, reducers, branch takeoffs, air chamber
etc. as per direction and drawing. Hangers, brackets, stiffeners
and isolator boxes shall be fabricated with MS angle / bar or rod
as per drawing and direction and shall be painted after proper
removal of rust.
Duct shall be constructed with best-bloomed galvanized sheet
steel. Before installation duct inside and out side shall be cleaned
from any dust. Between flanges, for flanged end duct, approved
type of gasket shall be used. Approved type of sealing compound
shall be used to make the ductwork leak proof. Duct shall be
hanged or supported at an interval of not more than 4 feet using
MS angle, Rod etc.
Duct made of 24 SWG GP sheets. Sft 1500.00 220.00 330,000.00
QUOTATION FOR SUPPLY, INSTALLATION, TESTING & COMMISSIONING
OF CENTRAL AIR CONDITIONING SYSTEM
PROJECT: MONDOL COTTON CLUB LTD.
Schedule - A : Supply Of Imported Items
Supply of Imported Items Local supply & Labour
Rate (in USD) Rate (in Taka)
Sl. No. Short Description of Items Unit Qty.
SUPPLY RATE TOTAL SUPPLY LABOUR TOTAL AMOUNT
(USD) AMOUNT (USD) AMOUNT (TK) (TK)

15.0 Duct Insulation


Supply and installation of Nitril rubber insulation of 19 mm thick
30kg/ cum specific weight having conductivity of 0.30. complete
Sft 1500 120.00 180,000.00
with reinforced, adhesive, , holding pin, glue for pin etc.

Brand: Aeroflex
Country of Origin: China

18.0 Closed Type Expansion Tank With Auto Refiled Pump Set 1 7,500.00 7,500.00
Capacity: 300 Litter.

19.0 Testing, Commissioning and Balancing Job 1 50,000.00 50,000.00


After proper installation and certification the system shall be
tested, commissioned and balanced as per direction and
recommendation by the Manufacturer.

TOTAL COST IN USD(C & F AT CHITTAGONG PORT) & Taka 100,877.00 3,180,411.00

You might also like