British Engine Technical Report 1981 Volume XIV
Fig. 4. Coral defections
st oP
6-H
e
wai
. 2
26, OMe 6M)
rent, For uniform wall and
stiffener sections Equations (10),
(11) and (12) and Fig 3 become
‘once more applicable provided ps
{s substituted for p in the relevant
equations.
"The wall panels between the
stiffeners can be treated as
rectangular panels fixed (bui
atall four edges and subjected to 8
‘uniform pressure load p over the
entire area. Reference (7) covers
this particular case and gives the
‘maximum bending stress, which
‘occurs at the centre of the long
where the value of B depends
he ratio of the two sid
4a/, bis the width or the shor
span and fis the panel plate