Tooway Installer Manual

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 54

Tooway™

Preliminary Installation Training


Q2 2011
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 2
Tooway terminal ODU

page 3
Tooway TRIA description

> RT4000N-010:
- 3W amplifier
- Electromagnetic switch of polarization
(guarantied for not less than 500 switches)
- 300-800MHz Rx, 1800-2300MHz Tx (1
connector)(2 connectors at the beginning)
- Beeper for antenna pointing
- Maximum 50m IFL length with RG6 cable
- Not paint, zinc, no feed/polarizer plastic
cup

> Weight is 3.7 kg for TRIA in its packaging

> MTBF : 11 years (5 year lifetime expected)

> Availability : January 2011


page 4
Tooway User terminal for Ka band
> RM4100N-010:
- One IFL Cable
- 300-800MHz Rx, 1800-
2300MHz Tx (1 connector)

- 1 x Ethernet interface (1Gbps)

- USB interface (for future


service upgrade)

- GUI

- 110/220Vac → 30 Vdc power to


TRIA
page 5
Tooway 0.75 antenna shipping box

> RA4075N-010:
- 77 x 72cm antenna dish size (packaging size 100 x 80 x 17.5cm)
- Weight : 12.8kg
- Integrating carry handle solution

page 6
Tooway 0.75m antenna description (E)
> European mid pole solution (pole not provided by the logistic centre in Europe,
beige color – 40/75mm)
> For Elevation angels up to 45 °

page 7
Az/El adjustment (E)

Waiting picture with the correct antenna colour


> Az adjustment

> El adjustment

page 8
Antenna pointing limits
> Find out the window Elevation

> 56.5° noise heard beat tone


56.5° first hint of a carrier

54.5° modem sync SNR 2.5 dB

53° optimum pointing SNR 9.9

52° modem sync. SNR 0.0 dB

51° modem start sync


first hint of a carrier detectable
<51° noise and heard beat tone

page 9
Antenna pointing limits 2.5°
> The size of the window

Carrier detect

Modem sync
Peeking
optimum

-2.4° -1.8° 1.8° 2.4°

-2°

-2.5°

Antenna peaking behaviour corresponds to a


1.5 m Ku band antenna
page 10
Terminal mount mechanical load

page 11
Alternative Tooway terminal versions
for special applications
> Top pole mount antenna
- Same size antenna mount for higher elevation above 45°
- Delivered with SB1 universal mount, no flexibility on mount diameter
- Antenna colour dark gray as SB1 antenna

> IDU with 2 IFL cables for services including broadcast functions
(Capability to connect separate Ka band receiver)
- RM4200N-010:
- 1000-1500MHz Rx (1 connector)
- 1800-2300MHz Tx (1 connector)
- 1 x Ethernet interface (1Gbps)
- USB interface (for future service upgrade)
- 110/220Vac → 30Vdc power supply (<50m IFL length with RG6)
- Black housing with blue LEDs
> Professional terminal 1m/1.2 m antenna under development (Aug 2011)

page 12
Tooway ODU synthesis

> The following table provides G/T and EIRP performances of the Tooway ODU

Description EIRP @ 29.75GHz Rx G/T @ 19.95GHz


0.75m / 3W ODU 48.4dBW 17.2dB/K
1.0m / 3W ODU 51.2dBW 20.4dB/K
1.2m / 3W ODU 52.8dBW 23.0dB/K

> Tooway service deployment is foreseen with the smallest one, nevertheless a 1
and 1.2m antenna dish sizes could be used in the edge of KA-SAT coverage

> As 1 and 1.2m antenna dish size have an EIRP higher than 50dBW, the
distributor has to manage license issues

page 13
Tooway terminal setup
Broadband service only

> Interactive services with 1-IFL modem toowayTM TRIA


1-IFL

toowayTM antenna
Phone
ToowayTM modem
1-IFL

VoIP phone IPTV STB

Rx/Tx

WiFi router L/S band cable for tooway


optional Cable for Analogue phone
Ethernet cable
SCART/DVI/HDMI…for TV
User PC

User TV screen
page 14
Tooway terminal setup
Broadband service only + DTH Ka & Ku band Rx only

> Interactive services with 2-IFL modem


toowayTM TRIA
2-IFL
> Ka band Rx only with additional splitter (9°E) Ku DTH LNB

> Ku band Rx only with additional Ku band LNB


(0.8°W, 5°E, 13°E or 19°E)

toowayTM antenna
Phone
ToowayTM modem
2-IFL

VoIP phone IPTV STB Rx

Tx

WiFi router
L/S band cable for tooway
Cable for Analogue phone
Ethernet cable
SCART/DVI/HDMI…for TV
User PC Satellite 2 way splitter
L band cable for DTH
Reference : S106
Public cost : 6€ TTC
User TV screen
page 15
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 16
Necessary accessories

> Antenna fixation


- Fixation on a wall
- Estimated price 15 – 20 €

- Fixation on the ground (Flat roof)


- Estimated price 20 – 35 €

- Fixation on an angled roof


- Estimated price 50 to 95 €

page 17
Necessary accessories

•Ifl Cables “coaxial cable” connection between Modem


and ODU (TRIA)

•Normally (98% of all cases) one cable for TX and RX


•300 – 800 MHz Fwd Link IF in frequency range of
cable networks and mobile services
•Cable length about 50 m with good RG 6 cable
•Centre wire must be full copper min 1mm Diameter
•Minimum double shielding
•Estimated price 25€/100 m

page 18
Multifeed for TV reception

page 19
Multifeed TV reception

Surfbeam 2 antenna pointed to 9 ° East


Multifeed reception on that antenna from following orbital pos.

5° W (AB 3 Fransat) possible with margin of about 4 dB


0.8° W in principle possible; further test on site
4.8° E in principle possible; further test on site
7° E not possible too close to Terminal feed require special development
9° E not possible as same orbital position of Ka Sat
13° E possible with sufficient margins
16° E not possible due to strong interference and insufficient power satellites
19.2° E possible with sufficient margins
28.5° E possible for all official Freesat channels with margins of
about 4 dB

page 20
Multifeed
28.5 ° East == 19° E – 13° E – 4.8° E – 0.8° W == 5° W

page 21
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 22
Licensing for Tooway

CEPT RECOMMENDATION:
When a Terminal:

•Receives in the exclusive Satellite Band 19.7-20.2 GHz

• Is located more than 500 m away from any airport

• Transmits in the Exclusive Satellite Band (29.5 – 30.00GHz)

• Has a Transmit Power of no more than 2 Watt

• Generates an EIRP of no more than 50 dBW

NO INDIVIDUAL LICENSING IS REQUIRED

This blanket license applies to most European countries but all installers
must comply with local regulations
Page
23
Paris, 5/8/2011 page 23
Network & Product Description
Health & security
Weight of antenna plus transceiver is 14Kgs
Lifting the antenna over shoulder – new drawing
Balance
Fix transceiver after securing antenna on mast

page 24
Health & security
Assessing building earth
Before linking the Tooway coaxial cable into the building
earthing system you should assess the building earth. If the
property does not conform to local regulations then the
customer must be informed
If the property does conform
then you should earth the
system to prevent static build up and or touch currents
•Identify a suitable earthing location (e.g. socket, lighting
circuit, electrical circuit)
•Install a coaxial cable earthing block and earth as shown

page 25
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 26
Installation position/ Line of Sight

There are 4 criteria for choosing a site for antenna


installation
1. Clear Line Of Sight (L.O.S)
2. Suitable surface for fixing antenna mount
3. Cable route and distance – Max 50m
4. Safety

page 27
Tooway manual
Line of Sight
There must be a 10 degree separation between the line of
sight angle and any obstacles

Normally a wall installation at high level gives the clearest L.O.S.

page 28
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 29
FWD link user beams

page 30
Mapping and configuration

> Color in the pdf Color in Viasat GUI Number in Viasat GUI
> RED BLUE 1
> GREEN ORANGE 2
> BLUE PURPLE 3
> YELLOW GREEN 4

> Beam number Beam color Symbol rate Center frequency


Polarization
> 1 Blue 50 19.73125 RHCP
> 2 Orange 50 19.99375 RHCP
> 3 Purple 50 20.11875 LHCP
> 4 Green 50 19.85625 LHCP

page 31
Ka Sat finder
> http://finder.tooway-instal.com

page 32
Ka Sat finder
> http://finder.tooway-instal.com

page 33
KA-sat Finder iPhone

page 34
34
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 35
Tooway Terminal pointing procedure
Presumption Modem installed and
IFL connected to TRAI
> Zusammenbau der Antenne
> Richtigen SAT-Spot finden
> Modem und Laptop verbinden, enter 192.168.100.1
> Goto Modem GUI Install menu; enter:
192.168.100.1/?page=install
> Korrekte Spotdaten eingeben => TRIA beeper starts
> Antenne einstellen => Modem lock tone
> Azimuth fixieren
> Elevation fixieren => continuous tone
> Antenna final fixation
> Pointing check (Daumen Check)

page 36
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 37
Terminal GUI 1.0.3
http://192.168.100.1

page 38
Terminal GUI 1.0.3
http://192.168.100.1/?page=install

page 39
Terminal GUI 1.0.3

page 40
GUI Version 1.1.1
http://192.168.100.1

page 41
GUI Version 1.1.1

page 42
GUI 1.1.1

page 43
GUI 1.1.1
http://192.168.100.1/install

page 44
GUI 1.1.1

page 45
GUI 1.1.1

page 46
GUI 1.1.1

page 47
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 48
Az/El adjustment (E)

Waiting picture with the correct antenna colour


> Az adjustment

> El adjustment

page 49
Pointing Beeper process Phase
In Az, Modem detect the first maximum

First maximum
Lower Beep Beep tone

Constant Beep Beep tone

Satellite
Fwc carrier AGC tone (bip bup), Modem Carrier
SNR detection and synch.

Heard Beat
SNR about 0 dB

Az or El angle of antenna
page 50
Pointing Beeper process Phase
In Az, Modem detect the first maximum
Maximum
peeking
point

Second maximum
0.15 dB below maximum
Continuous tone

Lower Beep Beep tone

Satellite
Fwc carrier AGC tone (bip bup), Modem Carrier
SNR detection and synch.
Heard Beat
SNR about 0 dB

Az or El angle of antenna
page 51
Summary

q The Tooway KA-SAT user terminal


q Accessories and Multifeed
q Health and Safety
q Satellite pointing basics
q Getting Spot configuration
q The pointing process
q The Modem GUI
q The beeper
q The Modem Signalling

page 52
Modem LED legende

page 53
Thank you
for your kind attention!

Enjoy the film!!

page 54

You might also like