Professional Documents
Culture Documents
SL-C/SL-V Series: Installation Procedure of Front Protection Cover and Dimmer Filter
SL-C/SL-V Series: Installation Procedure of Front Protection Cover and Dimmer Filter
SL-C/SL-V Series: Installation Procedure of Front Protection Cover and Dimmer Filter
1 Hook the claw on one side of the front protection cover onto the 0
1
8
6
5.8
4.3
8
6
5.8
4.3
groove on the side of the SL-C/SL-V series as shown, then push the 2 2 4.5 3.2 4.5 3.2
claw on the other side onto the groove. 3 3.5 2.4 3.5 2.4
4 2.5 1.8 2.5 1.8
* A maximum of two front protection covers can be installed: one for the
SL-C/SL-V series transmitter and the other for the receiver. A maximum of two dimmer filters
can be installed on a single front protection cover.
2 Adjust the position of the front protection cover so that its end
SL-V48H SL-V24L SL-C48H SL-C24L OP-51464 OP-51473 950.3
SL-V52H SL-V26L SL-C52H SL-C26L OP-51465 – 1030.3
surface is level and at the same height as that of the end surface SL-V56H SL-V28L SL-C56H SL-C28L OP-51466 – 1110.3
SL-V60H SL-V30L SL-C60H SL-C30L OP-51467 – 1190.3
of the SL-C/SL-V series.
SL-V64H SL-V32L SL-C64H SL-C32L OP-51468 OP-51474 1270.3
Align this surface. SL-V72H SL-V36L – – OP-83198 – 1430.2
SL-V80H SL-V40L – – OP-83200 – 1590.2
Front protection cover SL-C/SL-V series SL-V88H SL-V44L – – OP-83202 – 1750.2
SL-V96H SL-V48L – – OP-83204 – 1910.2
SL-V104H SL-V52L – – OP-83206 – 2070.2
SL-V112H SL-V56L – – OP-83208 – 2230.2
SL-V120H SL-V60L – – OP-83210 – 2390.2
E-to-E mounting bracket (OP-83181), install the SL-C/SL-V SL-C16F OP-66800 160.3
series by using the mounting bracket first, then install the front SL-C24F OP-66801 240.3
protection cover. These mounting brackets cannot be installed SL-C32F OP-66802 320.3
in the SL-C/SL-V series after the front protection cover has SL-C40F OP-66803 400.3
already been installed. SL-C48F OP-66804 480.3
SL-C56F OP-66805 560.3
Installation Procedure of Dimmer Filter SL-C64F OP-66806 640.3
1 Install the dimmer filter in the front protection cover by sliding it as SL-C72F
SL-C80F
OP-66807
OP-66808
720.3
800.3
shown in the illustration below. SL-C88F OP-66809 880.3
• A maximum of two dimmer filters can be installed on a single SL-C96F OP-66810 960.3
SL-C104F OP-66811 1040.3
front protection cover. SL-C112F OP-66812 1120.3
• To install the two dimmer filters, either install them after SL-C120F OP-66813 1200.3
stacking them or install one dimmer filter after another. SL-C128F OP-66814 1280.3
Front protection cover Note Insert the dimmer filter * Front protection cover must be installed to the suitable model of SL-V/SL-C
series according to the above table. (Ex. for SL-V08H, OP-51454 must be
so that the protrusion (1) installed.)
(1) on the front protection * One package of front protection cover contains one unit of front protection
cover and the notch (2) cover. Two units of front protection cover are required to install the front
on the dimmer filter face protection cover on both the transmitter and receiver.
(2) in the same direction. If * One package of dimmer filter contains one unit of dimmer filter.
they are installed facing
different directions, the
display indicators of the
Dimmer filter SL-C/SL-V series will be
obscured by the dimmer
filter.
2 Press both ends of the dimmer filter toward the front protection
cover, and confirm that the dimmer filter fits into the front
protection cover securely.
Correct
2010
Incorrect Incorrect 11244E 1040-1 96M11244