This document contains a bill of materials listing 9 items needed to assemble a driveshaft for a pad mount pump. The items include fittings, fuses, lights, switches, valves, and a driveshaft. Proprietary information is provided noting that all dimensions are in inches and the document is the property of Tread Corporation.
This document contains a bill of materials listing 9 items needed to assemble a driveshaft for a pad mount pump. The items include fittings, fuses, lights, switches, valves, and a driveshaft. Proprietary information is provided noting that all dimensions are in inches and the document is the property of Tread Corporation.
This document contains a bill of materials listing 9 items needed to assemble a driveshaft for a pad mount pump. The items include fittings, fuses, lights, switches, valves, and a driveshaft. Proprietary information is provided noting that all dimensions are in inches and the document is the property of Tread Corporation.
This document contains a bill of materials listing 9 items needed to assemble a driveshaft for a pad mount pump. The items include fittings, fuses, lights, switches, valves, and a driveshaft. Proprietary information is provided noting that all dimensions are in inches and the document is the property of Tread Corporation.
1 1 DRIVESHAFT FOR PAD MOUNT PUMP 247.6893 2* 1 FITTING 90 MNPT/FNPT .125-.125 82089.0202 3* 1 FITTING STR MNPT/FNPT .125-.125 82092.0202 4* 1 FUSE HOLDER WEATHERTIGHT ATO/ATC 231.2902 5* 1 LENS PILOT LIGHT PTO GREEN 231.6882 6* 1 PTO AIR SWITCH BRACKET 285.5144 7 1 PTO CONSULT ENG FOR SPECIFIC RATIO ---------- 8* 1 VALVE AIR PROTECTION WM778A 242.0278 9* 1 VALVE BALL ST .25 264.3102 PROPRIETARY STATEMENT UNLESS OTHERWISE SPECIFIED
THIS DOCUMENT AND ALL
ALL DIMENSIONS ARE IN INCHES 1.0 INCH = 25.4 mm TREAD CORPORATION ROANOKE, VIRGINIA 24012 USA INFORMATION CONTAINED HEREIN ARE PROJECT THE PROPERTY OF TREAD CORP. AND ARE NOT TO BE USED, DISCLOSED, OR TITLE COPIED EXCEPT AS EXPRESSELY AUTHORIZED. ENG SPECIFIED PAD PTO ASM THIRD ANGLE PROJECTION DRAWN UNIBODY TOLERANCE LIMITS UNLESS OTHERWISE SPECIFIED rduncan DWG NO REV SIZE DECIMAL .X = ± .100 DECIMAL .XX = ±.020 DATE 12/9/2005 UH1017A06 1 C DECIMAL .XXX = ± .005 APPR. WEIGHT SHEET Last Changed: 1/17/2006 ANGULARITY = ± 0.5 DEG 0.0 lbm 1 OF 1