The CA3130IC combines advantages of CMOS and bipolar transistors. It functions as a current to voltage converter with a 0.22 microfarad capacitor between its inverting and non-inverting terminals. The circuit operates on a voltage supply of 5-16V and can be phase compensated through a single external capacitor. The CA3130IC provides high bandwidth like bipolar op-amps and is extremely efficient working with low current like CMOS op-amps.
The CA3130IC combines advantages of CMOS and bipolar transistors. It functions as a current to voltage converter with a 0.22 microfarad capacitor between its inverting and non-inverting terminals. The circuit operates on a voltage supply of 5-16V and can be phase compensated through a single external capacitor. The CA3130IC provides high bandwidth like bipolar op-amps and is extremely efficient working with low current like CMOS op-amps.
The CA3130IC combines advantages of CMOS and bipolar transistors. It functions as a current to voltage converter with a 0.22 microfarad capacitor between its inverting and non-inverting terminals. The circuit operates on a voltage supply of 5-16V and can be phase compensated through a single external capacitor. The CA3130IC provides high bandwidth like bipolar op-amps and is extremely efficient working with low current like CMOS op-amps.
It is an op-amp that combine the advantage of both COSMOC (complementary metal-oxide
semiconductor) and bipolar transistors. CA3130 IC function as current to voltage converter with a 0.22microF capacitor connected between its inverting and non-inverting terminals. The CA3130 IC series cercuit mainly operated at voltage supply which ranges from 5v -16v . These circuit can be phase compensated through a single exterioe capacitor and its terminals can be used for offset voltage adjustment where offset-null is required . CA3130 IC is available with MOSFET .CMOS IC is extremely efficient that works with less current where as bipolar IC held high bandwidth . So it combines the benefints of both the op-amps like CMOS and bipolar . The input terminal current used by this IC is approximately 1MA and maximum o/p voltage is 13.3v . When the cellphone detector signal is detected , the output if IC becomes high and low alternatively acording to the frequency of the signal as indicated by the LED ` Maximum sink current is 20mA i/ i/p terminal current is 1mA duration od o/p short circuit is indefinite CMRR is 80dB DC i/p voltage range from +8v to-0.5v Power supply ranges is wide Differential i/p voltage is 8v Singe supply ranges from -5v t0 16v DC voltage supply is 16v o/p maximum voltage is 13.3v it is perfact of the application of singe supply maximum source current is 22mA current supply is 10mA