Professional Documents
Culture Documents
SolidCAM Release Notes 2021 Sp2 Hf1
SolidCAM Release Notes 2021 Sp2 Hf1
Bugs
SOL-17649 Can't turn on or off templates in settings Fixed
SOL-17622 Restore link doesn’t work Fixed
SOL-17606 Copy a Holder to the same or another Components Folder - Crashes SolidCAM Fixed
SOL-17594 Gcode/gear\_min\_spin is wrong Fixed
SOL-17579 Feed & Spin | insufficient range of decimal places Fixed
SOL-17576 Export to XML | misspelled value in XML Fixed
SOL-17570 iMachining/GUI problem with spin in m/min Fixed
SOL-17563 Turning Drill Operation/Wrong tool orientation Fixed
SOL-17542 XML Interface - Import of machining level wrong Fixed
SOL-17533 iMachining runs everything twice Fixed
SOL-17525 SolidCAM Crash when copying Tool in TLV File Fixed
SOL-17524 SolidCAM Crash after adding new Probe Job Fixed
SOL-17521 3x Undercut || Unable to calculate TP Fixed
SOL-17510 Adding 3D holder changed joints Fixed
SOL-17508 Change Submachine - incorrect context menu Fixed
SOL-17506 Machine Preview/Part move/Part jump in the Machine Preview Fixed
SOL-17484 Default state of using compensation is not as defined in VMID Fixed
SOL-17482 Milling/Error Message during NC-Code generation Fixed
SOL-17481 iMach 3D / calculation freezes Fixed
SOL-17474 Back spindle is in wrong position upon opening Machine preview Fixed
SOL-17473 feed\_teeth=0 HSS operations Fixed
SOL-17464 Default settings are not applied Fixed
SOL-17454 G-code/arc start are not relative in thread milling Fixed
SOL-17446 Tool assembly incorrect Fixed
SOL-17442 G-Code/Wrong lpos on 4x horizontal machine Fixed
SOL-17440 Portuguese version GUI issues Fixed
SOL-17427 Iscar Tool Advisor doesn't open Fixed
Gcode/change bits in first @line inside sub-proc when in absolute mode are Fixed
SOL-17423 wrong
SOL-17422 SolidCAM generating Crash while using Probe Operation Fixed
SOL-17401 MCO/Wrong position of X1 axis on the beginning of MCO Fixed
SOL-17400 G-code/Different lpos values with and without procedures Fixed
SOL-17396 Hard to pick Clearance area type for 5x operations in Traditional Chinese version Fixed
SOL-17389 iMachining 2D/Not correct toolpath if cutting direction is Conventional Fixed
SOL-17387 SimTurning/no stock update for following operations Fixed
SOL-17374 Machine Simulation/After the Unloading Tool, the turret rotation is not saved Fixed
SOL-17373 Integrated Cimco doesn't work with open/close command Fixed
SOL-17350 Portuguese/GUI problems Fixed
SOL-17349 Spanish/GUI pro Fixed
SOL-17347 Korean/GUI problems Fixed
SOL-17331 French/GUI problems Fixed
Release notes
Page 2 7/7/2021