Professional Documents
Culture Documents
Adult Mask - Pleated Style Side Elastic With Adjusters Version 4
Adult Mask - Pleated Style Side Elastic With Adjusters Version 4
Adult Mask - Pleated Style Side Elastic With Adjusters Version 4
OUTSIDE
INSIDE
POCKET
FOR FILTER
INSERTION
INSIDE
Inside layer width (vertical) (measure extended including pleats) 18 cms 0.3
inside layer filter pocket opening from mask top edge 2 cms 0.2
3 width at side (vertical) 9 cms 0.3
Metal nose pin quality specification : Galvanized iron 16 gauge OR Aluminium OR Copper with plastic coating
NOTE: THE SINGLE FABRIC LAYER ON THE INSIDE OF THE MASK WHICH ENDS 2 cms FROM TOP EDGE OF THE MASK AND
CREATES A POUCH FEATURE IS THE FILTER POCKET TO INSERT REPLACEABLE FILTER FOR ENHANCED PROTECTION.
LOOP LABEL
> Fabindia label should be positioned on the right side of mask (wearer's left side) (see image)
> Fabindia label should be placed 5mm down from top edge
> Fabindia label is attached by inserting the top edge of the label into the side binding. (see image)
CONSTRUCTION
> Top of mask - top and middle layer stitched together
> Bottom of mask - top and inside layer (pocket pouch layer) stitched together
> Middle layer bottom hem- turn double hem and topstitch 5mm from edge
> Inside layer (pocket pouch layer) top edge- turn double hem and topstitch 5 mm from edge
> Left and right side of mask - binding finishing with 0.8 mm binding ready width