Professional Documents
Culture Documents
Opl 15032019102156
Opl 15032019102156
Opl 15032019102156
(**)
Description :
At Switchgear main motor roller Press CM1 and CM2 (aER12-104AH,105AH and aER12-204AH,205AH) have two hardware
interlocking for permit start closing switchgear. The interlocking signal as following :
1. Permit start main motor signal from Liquid Stater Panel of Roller Press
2. Permit start main motor signal from Roller Press Control cabinet
1 2
Mark cable XT/49Z2M08.1LSP-CLS (49) & XT/54Z2M08.1LSP-CLS (62) = Interlock from water resistance (LSP)
Mark cable XT/54Z2M08AC-CLS (62) & XT/54Z2M08AC-CLS (54) = Interlock from liquid Stater Panel
If All interlocking DCS has been completed and main motor show ready At Switchgear main motor Roller Press CM1 and
CM2 (aER12-104AH,105AH and aER12-204AH,205AH) can Started