Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

A fire onboard may happen ELECTRICAL

in every vessel and has to be


managed not only MALFUNCTION
successfully, but also

FIRE SAFETY
FIRE SAFETY quickly, in order to prevent
larger damages or even loss
Electrical equipment on board the
vessel such as wiring, batteries, and
electronic devices can malfunction

AWARENESS
of vessel and crew, which

AWARENESS could happen if the fire


spreads. Fire on board is one
or short circuit and generate heat
that can lead to fire

ON
ON BOARD
BOARD of the most dangerous
emergencies for a vessel.
But, what are the most usual
causes and the preventive
actions to be taken?

CONTROL MEASURE

Regular maintenance and inspection


of all ELECTRICAL SYSTEMS,
including WIRING, SWITCHES, and
ELECTRICAL EQUIPMENTS

GOF OFFSHORE SDN. BHD. properly TRAINED and QUALIFIED


HSEQ DEPARTMENT
Safety First personnel should carry out the
electrical work

PREPARED BY NOR HAIQHAL MARCH 2023


FUEL AND OIL COOKING CHEMICAL &
LEAKS (ENGINE) (GALLEY) HAZARDOUS MATERIAL

Crew boats usually carry a Cooking equipment such as stoves Crew boat may carry chemicals and
significant amount of fuel and oil, and microwave can easily stat a fire other hazardous materias that can
which can leak and ignite if not if left unattended or not used ignite if they come into contact with
handled properly properly. heat sources or other materials.

CONTROL MEASURE CONTROL MEASURE CONTROL MEASURE

Regular maintenance and inspection of Proper TRAINING for all personnel Proper STORAGE and HANDLING
all engine room EQUIPMENT and who use the GALLEY EQUIPMENT procedure
SYSTEMS, including FUEL LINES,
ENGINES, and VENTILATION. Regular INSPECTION and all personnel should receive PROPER
MAINTENANCE of cooking TRAINING in HANDLING these
BILGES to be clean at all time equipments hazardous chemicals.

proper FIRE DETECTION and never left the STOVE on make sure it is SEALED CLOSE and the
SUPPRESSION SYSTEMS should be in UNATTENDED container are in GREAT CONDITION.
place
make sure to update the Material
Safety Data Sheet (MSDS)

You might also like