Professional Documents
Culture Documents
PAVIMYC-HB-2C-Industrial Flooring
PAVIMYC-HB-2C-Industrial Flooring
100% solid 2-component epoxy system formulated based on epoxy resins and pigments. Our Prescription and Projects department offers advice and technical solutions
to all professionals who need it.
Industrial Flooring
Recommended to protect concrete floors from wear and chemical agents and extending floor’s lifetime.
PAVIMYC HB 2/C allows for different continuous coating systems to be achieved with one single product (smooth,
non-slip, self-levelling, multi-layer).
CERTIFIED PRODUCT
UNE-EN 1062-6:2003 UNE-EN ISO 7783:2019 UNE-EN 1062-3:2008 UNE-EN 1542:2000
1 On-site technical advice. PAVIMYC HB 2/C
Determination of Determination of Determination of Determination of adhesion
permeability to carbon permeability to water permeability to liquid water. by direct traction. 2 Study of site and substrate pathologies.
dioxide. vapour. Capsule method.
UNE-EN 13529:2005 UNE-EN ISO 5470-1:2017 UNE-EN ISO 6272-1:2012 UNE-EN 13892-2:2003 Diagnostics of substrate condition with
Resistance to strong Determination of Rapid deformation tests Material testing methods 3
chemical attacks. resistance to abrasion. (impact resistance). Rapid for continuous screeds.
recommendations of preparation and execution
Taber abrasion test. deformation (impact Determination of guidelines.
resistance) tests - Part 1: resistance to bending and
Falling-weight test, large-area compression.
indenter.
All-in-one: roller coat, self-levelling and JUNOMATIC tinting system - Instant RAL
NCS
NCS
L
RA
colours.
L
RA
Combina
JUNO
JUNO
Garages, Warehouses
parkings and
workshops
PAINT MANUFACTURERS SINCE 1927
PAV V1 1022 EN
Technical Data Application Systems Application Systems
PAVIMYC HB 2/C SMOOTH TOPCOAT SYSTEM ANTI-SLIP SYSTEM* MULTI-LAYER SYSTEM 1mm MULTI-LAYER SYSTEM 2-3mm
PAVIMYC HB 2/C
PRIMER (Prod. Code 7931)
(Prod. Code 7915)
• S urface humidity must be below 4% measured two centimeters deep, and no presence of
capillary or environmental humidity.
• Repair cracks, fissures and imperfections with suitable products.
Surface
• Carry out necessary mechanical treatment (milling, shot blasting, sanding or diamond
preparation
grinding).
• Sweep the resulting dust and vacuum afterwards.
• The surface must be clean, dry and free of objects.
2 1 2 1 2 1 3 2 1
Minimum concrete Traction resistance: > 1,5 N/mm2
strength Compression resistance: > 25 N/mm2
PRODUCT CONSUMPTION PRODUCT CONSUMPTION PRODUCT CONSUMPTION PRODUCT CONSUMPTION
Finish High Satin Gloss 1 or 2 coats 1 or 2 coats
1 - 2 primer coats of 1 - 2 primer coats of 0.4-0.7 kg/m2
0.3-0.5 kg/m2 1 0.3-0.5 kg/m2 1 Primer Pavimyc HB 2/C PRIMER 1 Pavimyc HB 2/C 0.4-0.7 kg/m2
1 Primer Pavimyc HB 2/C PRIMER
per coat
Primer Pavimyc HB 2/C PRIMER total Primer
JUNOMATIC INDUSTRIAL tinting per coat (Prod. Code 7915) PRIMER total
Colour Translucent Amber (Prod. Code 7915) (Prod. Code 7915)
system colours (Prod. Code 7915)
2 coats Pavimyc HB 2/C 0.25-0.3 kg/m2 2 coats of
2 Finish Sand Sand 0.3-0.6 mm or
Format 20 Kg 20 Kg (Prod. Code 7931) per coat 2 Finish+ Pavimyc HB 2/C 4 kg/m2 Sand Sand 0.3-0.6 mm or
0.25-0.3 kg/m2 broadcast 0.7 mm 4 kg/m2
micro-beads (Prod.Code 7931) broadcast 0.7 mm
per coat
(Prod. Code 7251) + micro-beads
Short-haired roller, brush, notched trowel. (Prod. Code 7251)
Application Swipe and vacuum Swipe and vacuum
Apply product at supplid viscosity.
* Slip grade depends on substrate condition.
2 2 coats Pavimyc HB 2/C 0.35 kg/m2 0.9 kg/m2 mixture
Finish 2 Pavimyc HB 2/C
Temperature Time SELF-LEVELLING SYSTEM 1 mm SELF-LEVELLING SYSTEM 1,5-3mm (Prod. Code 7931) per coat
Intermediate (Prod. Code 7931)
(0.6 kg/m2
Pavimyc HB 2/C
+10ºC ≈ 50 minutes self-leveling + 0.5 part sand
(Prod. Code 7931)
Pot life coat aggregate
+20ºC ≈ 40 minutes + 0.3 Kg/m2
0.1-0.3 mm
sand aggregate)
+30ºC ≈ 25 minutes
Sand Sand 0.3-0.6 mm
4 kg/m2
broadcast or 0.7 mm.
Temperature Minimum Maximum Temperature Minimum Maximum
+10ºC 30 hours 4 days +10ºC 30 hours 3 days Swipe and vacuum
Repaint time +20ºC 12 hours 2 days +20ºC 24 hours 2 days 3 2 coats
0.35 kg/m2
+30ºC 10 hours 1 day +30ºC 16 hours 1 day Finish Pavimyc HB 2/C
per coat
2 1 2 1 (Prod. Code 7931)
The consumptions given are estimates and may vary depending on the roughness and surface texture of the substrate. The consumptions given are estimates and may vary depending on the roughness and surface texture of the substrate.
Technical Data Application Systems Application Systems
PAVIMYC HB 2/C SMOOTH TOPCOAT SYSTEM ANTI-SLIP SYSTEM* MULTI-LAYER SYSTEM 1mm MULTI-LAYER SYSTEM 2-3mm
PAVIMYC HB 2/C
PRIMER (Prod. Code 7931)
(Prod. Code 7915)
• S urface humidity must be below 4% measured two centimeters deep, and no presence of
capillary or environmental humidity.
• Repair cracks, fissures and imperfections with suitable products.
Surface
• Carry out necessary mechanical treatment (milling, shot blasting, sanding or diamond
preparation
grinding).
• Sweep the resulting dust and vacuum afterwards.
• The surface must be clean, dry and free of objects.
2 1 2 1 2 1 3 2 1
Minimum concrete Traction resistance: > 1,5 N/mm2
strength Compression resistance: > 25 N/mm2
PRODUCT CONSUMPTION PRODUCT CONSUMPTION PRODUCT CONSUMPTION PRODUCT CONSUMPTION
Finish High Satin Gloss 1 or 2 coats 1 or 2 coats
1 - 2 primer coats of 1 - 2 primer coats of 0.4-0.7 kg/m2
0.3-0.5 kg/m2 1 0.3-0.5 kg/m2 1 Primer Pavimyc HB 2/C PRIMER 1 Pavimyc HB 2/C 0.4-0.7 kg/m2
1 Primer Pavimyc HB 2/C PRIMER
per coat
Primer Pavimyc HB 2/C PRIMER total Primer
JUNOMATIC INDUSTRIAL tinting per coat (Prod. Code 7915) PRIMER total
Colour Translucent Amber (Prod. Code 7915) (Prod. Code 7915)
system colours (Prod. Code 7915)
2 coats Pavimyc HB 2/C 0.25-0.3 kg/m2 2 coats of
2 Finish Sand Sand 0.3-0.6 mm or
Format 20 Kg 20 Kg (Prod. Code 7931) per coat 2 Finish+ Pavimyc HB 2/C 4 kg/m2 Sand Sand 0.3-0.6 mm or
0.25-0.3 kg/m2 broadcast 0.7 mm 4 kg/m2
micro-beads (Prod.Code 7931) broadcast 0.7 mm
per coat
(Prod. Code 7251) + micro-beads
Short-haired roller, brush, notched trowel. (Prod. Code 7251)
Application Swipe and vacuum Swipe and vacuum
Apply product at supplid viscosity.
* Slip grade depends on substrate condition.
2 2 coats Pavimyc HB 2/C 0.35 kg/m2 0.9 kg/m2 mixture
Finish 2 Pavimyc HB 2/C
Temperature Time SELF-LEVELLING SYSTEM 1 mm SELF-LEVELLING SYSTEM 1,5-3mm (Prod. Code 7931) per coat
Intermediate (Prod. Code 7931)
(0.6 kg/m2
Pavimyc HB 2/C
+10ºC ≈ 50 minutes self-leveling + 0.5 part sand
(Prod. Code 7931)
Pot life coat aggregate
+20ºC ≈ 40 minutes + 0.3 Kg/m2
0.1-0.3 mm
sand aggregate)
+30ºC ≈ 25 minutes
Sand Sand 0.3-0.6 mm
4 kg/m2
broadcast or 0.7 mm.
Temperature Minimum Maximum Temperature Minimum Maximum
+10ºC 30 hours 4 days +10ºC 30 hours 3 days Swipe and vacuum
Repaint time +20ºC 12 hours 2 days +20ºC 24 hours 2 days 3 2 coats
0.35 kg/m2
+30ºC 10 hours 1 day +30ºC 16 hours 1 day Finish Pavimyc HB 2/C
per coat
2 1 2 1 (Prod. Code 7931)
The consumptions given are estimates and may vary depending on the roughness and surface texture of the substrate. The consumptions given are estimates and may vary depending on the roughness and surface texture of the substrate.
Technical Data Application Systems Application Systems
PAVIMYC HB 2/C SMOOTH TOPCOAT SYSTEM ANTI-SLIP SYSTEM* MULTI-LAYER SYSTEM 1mm MULTI-LAYER SYSTEM 2-3mm
PAVIMYC HB 2/C
PRIMER (Prod. Code 7931)
(Prod. Code 7915)
• S urface humidity must be below 4% measured two centimeters deep, and no presence of
capillary or environmental humidity.
• Repair cracks, fissures and imperfections with suitable products.
Surface
• Carry out necessary mechanical treatment (milling, shot blasting, sanding or diamond
preparation
grinding).
• Sweep the resulting dust and vacuum afterwards.
• The surface must be clean, dry and free of objects.
2 1 2 1 2 1 3 2 1
Minimum concrete Traction resistance: > 1,5 N/mm2
strength Compression resistance: > 25 N/mm2
PRODUCT CONSUMPTION PRODUCT CONSUMPTION PRODUCT CONSUMPTION PRODUCT CONSUMPTION
Finish High Satin Gloss 1 or 2 coats 1 or 2 coats
1 - 2 primer coats of 1 - 2 primer coats of 0.4-0.7 kg/m2
0.3-0.5 kg/m2 1 0.3-0.5 kg/m2 1 Primer Pavimyc HB 2/C PRIMER 1 Pavimyc HB 2/C 0.4-0.7 kg/m2
1 Primer Pavimyc HB 2/C PRIMER
per coat
Primer Pavimyc HB 2/C PRIMER total Primer
JUNOMATIC INDUSTRIAL tinting per coat (Prod. Code 7915) PRIMER total
Colour Translucent Amber (Prod. Code 7915) (Prod. Code 7915)
system colours (Prod. Code 7915)
2 coats Pavimyc HB 2/C 0.25-0.3 kg/m2 2 coats of
2 Finish Sand Sand 0.3-0.6 mm or
Format 20 Kg 20 Kg (Prod. Code 7931) per coat 2 Finish+ Pavimyc HB 2/C 4 kg/m2 Sand Sand 0.3-0.6 mm or
0.25-0.3 kg/m2 broadcast 0.7 mm 4 kg/m2
micro-beads (Prod.Code 7931) broadcast 0.7 mm
per coat
(Prod. Code 7251) + micro-beads
Short-haired roller, brush, notched trowel. (Prod. Code 7251)
Application Swipe and vacuum Swipe and vacuum
Apply product at supplid viscosity.
* Slip grade depends on substrate condition.
2 2 coats Pavimyc HB 2/C 0.35 kg/m2 0.9 kg/m2 mixture
Finish 2 Pavimyc HB 2/C
Temperature Time SELF-LEVELLING SYSTEM 1 mm SELF-LEVELLING SYSTEM 1,5-3mm (Prod. Code 7931) per coat
Intermediate (Prod. Code 7931)
(0.6 kg/m2
Pavimyc HB 2/C
+10ºC ≈ 50 minutes self-leveling + 0.5 part sand
(Prod. Code 7931)
Pot life coat aggregate
+20ºC ≈ 40 minutes + 0.3 Kg/m2
0.1-0.3 mm
sand aggregate)
+30ºC ≈ 25 minutes
Sand Sand 0.3-0.6 mm
4 kg/m2
broadcast or 0.7 mm.
Temperature Minimum Maximum Temperature Minimum Maximum
+10ºC 30 hours 4 days +10ºC 30 hours 3 days Swipe and vacuum
Repaint time +20ºC 12 hours 2 days +20ºC 24 hours 2 days 3 2 coats
0.35 kg/m2
+30ºC 10 hours 1 day +30ºC 16 hours 1 day Finish Pavimyc HB 2/C
per coat
2 1 2 1 (Prod. Code 7931)
The consumptions given are estimates and may vary depending on the roughness and surface texture of the substrate. The consumptions given are estimates and may vary depending on the roughness and surface texture of the substrate.
Industrial Flooring
PAVIMYC HB 2/C JUNO will help you with your projects
PAINT MANUFACTURERS SINCE 1927
100% solid 2-component epoxy system formulated based on epoxy resins and pigments. Our Prescription and Projects department offers advice and technical solutions
to all professionals who need it.
Industrial Flooring
Recommended to protect concrete floors from wear and chemical agents and extending floor’s lifetime.
PAVIMYC HB 2/C allows for different continuous coating systems to be achieved with one single product (smooth,
non-slip, self-levelling, multi-layer).
CERTIFIED PRODUCT
UNE-EN 1062-6:2003 UNE-EN ISO 7783:2019 UNE-EN 1062-3:2008 UNE-EN 1542:2000
1 On-site technical advice. PAVIMYC HB 2/C
Determination of Determination of Determination of Determination of adhesion
permeability to carbon permeability to water permeability to liquid water. by direct traction. 2 Study of site and substrate pathologies.
dioxide. vapour. Capsule method.
UNE-EN 13529:2005 UNE-EN ISO 5470-1:2017 UNE-EN ISO 6272-1:2012 UNE-EN 13892-2:2003 Diagnostics of substrate condition with
Resistance to strong Determination of Rapid deformation tests Material testing methods 3
chemical attacks. resistance to abrasion. (impact resistance). Rapid for continuous screeds.
recommendations of preparation and execution
Taber abrasion test. deformation (impact Determination of guidelines.
resistance) tests - Part 1: resistance to bending and
Falling-weight test, large-area compression.
indenter.
All-in-one: roller coat, self-levelling and JUNOMATIC tinting system - Instant RAL
NCS
NCS
L
RA
colours.
L
RA
Combina
JUNO
JUNO
Garages, Warehouses
parkings and
workshops
PAINT MANUFACTURERS SINCE 1927
PAV V1 1022 EN
Industrial Flooring
PAVIMYC HB 2/C JUNO will help you with your projects
PAINT MANUFACTURERS SINCE 1927
100% solid 2-component epoxy system formulated based on epoxy resins and pigments. Our Prescription and Projects department offers advice and technical solutions
to all professionals who need it.
Industrial Flooring
Recommended to protect concrete floors from wear and chemical agents and extending floor’s lifetime.
PAVIMYC HB 2/C allows for different continuous coating systems to be achieved with one single product (smooth,
non-slip, self-levelling, multi-layer).
CERTIFIED PRODUCT
UNE-EN 1062-6:2003 UNE-EN ISO 7783:2019 UNE-EN 1062-3:2008 UNE-EN 1542:2000
1 On-site technical advice. PAVIMYC HB 2/C
Determination of Determination of Determination of Determination of adhesion
permeability to carbon permeability to water permeability to liquid water. by direct traction. 2 Study of site and substrate pathologies.
dioxide. vapour. Capsule method.
UNE-EN 13529:2005 UNE-EN ISO 5470-1:2017 UNE-EN ISO 6272-1:2012 UNE-EN 13892-2:2003 Diagnostics of substrate condition with
Resistance to strong Determination of Rapid deformation tests Material testing methods 3
chemical attacks. resistance to abrasion. (impact resistance). Rapid for continuous screeds.
recommendations of preparation and execution
Taber abrasion test. deformation (impact Determination of guidelines.
resistance) tests - Part 1: resistance to bending and
Falling-weight test, large-area compression.
indenter.
All-in-one: roller coat, self-levelling and JUNOMATIC tinting system - Instant RAL
NCS
NCS
L
RA
colours.
L
RA
Combina
JUNO
JUNO
Garages, Warehouses
parkings and
workshops
PAINT MANUFACTURERS SINCE 1927
PAV V1 1022 EN