Measurement point for
Vo.load/line regulation and
ouiput ripple & noise,
(EIA) RC-9131 probe)
Bandwidth of scope:100MHz
48
Fuse “1 UL ASU Le .
6. 2 :
Baeicorod ope PH600S280—-* z LOAD
A -
“8
cNT TRM
cs
os
re
Bose plate
==NOTE=
mn.
»2.
+3.
*4,
Use on external fuse of fast blow type, for each ul
Put on input capacitor, C1, more than
22uF. (Refer to instruction manual)
Put on output capacitor. (3.3V: more than 10,000uF, SV: more than 4,700uF,
42V: more than 2,200uF, 15V; more than 2,200uF, 24V: more than 1,000uF,
28V: more than 820uF, 48V: more than 470uF)
Refer to instruction manual for further details.
unit ; mm)
MODEL NAME | PH600F280
DENSEI-LAMBDA
Cia=OT= OHDENSEI-LAMBDA
PH600S280
SPECIFICATIONS
cid 01-018
MODEL a
ITEMS : 2033 | 2005 | aso.is | 20.24 | 2so28 | 2w0.48
i] Nominal Ou Volmae vo 33 3 isp oe |
2) Maxims pat Cure [00] 00) ‘at | 35 [345
[Nominal Ouput Power Ww] 330 —| S00 or —| “a0 ao |
“af Econey yp) a |e
3 aque Voting Range Cc
6 opurCuret Typ) a ia as a Lae aa
7 Ont Vaage Acorn
Out Votags Range Aw
9] Maximum Ripple & Nowe oa | 50- [aaa as
| ca 150 [a5 [360 [20 [720
[Tol Rasim Cine Regan an oe a eT a
il Maxim Load Regulation ao [96 ao 9 aaa
1a] Over Curent Priston 1-150
15] Over VoliageProstion as
1a] Renate Senin Fosble
15] Remote ONTOFF Conta Posibi (SHORT ON OFENOWF)
Pazllel Operation
Applicable with CS signal —
17] Series Operation ca Possible
Ts] L0G. Signal Ca) Bullen (Open Collector Oupal)
197 Operating Temperate (Poy “BFE FTOUC(Bssepatey Ambient Tempersture n=O
20°C “#854C 100%, +100°C 80%
20) Operating Hay 30- 95°ARH (No Dewekop)
2] Storage Temperature 0°C = + 1OPC
32] Storage Humidity 10 95%4RIT (No Dewdrop)
35] Coon ~ E onduction Cooled
| 34l Temperatare Contin’ z oonerc
Withstand Volige
TnparBaseplte -2SRVAG, InpueOurpa SEVAC{BI MA Tor Ti
Output Baseplate: $00VIC for In
TGolaton Riau More
Tha 100M 9 25°C and TOPARET Output Ba
‘Vibration
‘Anl
~~ AtNo Opening, 10-38Hz (Sweep for lini)
tude 08251mm Constant (Maximum 420mv6)_ XX.
Shosk
196.1
29] Weight Typ) —
“00
30] Size (WHD)
145 x 12.7 x 86 (Refer to Outline Drawing)
NOTES:
11, AL2S0VDC and Maximum Output Curent,
(Baseplate Temperature = +25°C)
¥2.200 -400VDC, Constant Load
3. No lad - Fall load, Constant input voltage
“4. Const curent ining with automatic recovery
*5-Inverter shutdown method, Manual Reset with CNT sig
"6, Ratings - Refer to Derating Curve onthe Right
Load) s Percent of Maximum Outpt
Current,
Baseplate: Refer to Instruction manual
7 Heatsink has tobe Chosen According to Istretion
Mana
°8. Rete to Insnstion Mana
“9. External Components are Need for Operation
{Retr to Basic Connection and Instruction Manual)
"10. At280VDC Input (Refer to Instruction Manual)
*11 External cieuitis Needed for opecation
(efor to Tostruston Manual)
DERATING CURVE
100
i
2 0 3 4 60 80 100
Baseplate Temperature (°C)