Professional Documents
Culture Documents
Technical Notice - GPS Issue Mar 2020
Technical Notice - GPS Issue Mar 2020
Issue:
Solo engineering has identified an issue with a new batch of 2020 GPS units. Fitting a 2020
unit in addition to Quick shift loadcell and Brake pressure sensor can cause issue due to too
much power consumption.
2020 unit (affected – continue below)
+ +
2019 unit (not affected – install with normal harness connector)
(not affected)
Fix:
1) Disconnect your GPS for now …
2) Please contact Solo Engineering if this is impacting you. We will provide the required
cables.
www.soloengineering.com `
Page | 1 support@soloengineering.com
3) Some rewiring of the dashboard connector will be necessary:
- To disassemble the dashboard connector, please refer to the following video:
- https://youtu.be/uXTkm_XV2OY?t=158
Dashboard
Connector Harness AMPSEAL
Connector Sensor Dashboard ADU5
Boot Original Updated
3 CAN_Hi White White
4 CAN_Lo Green Green
7 GPS Grey (Remove) GPS Saver Green
9 GPS GND NA GPS Saver Black
10 GPS Power NA GPS Saver Red
11 12v Switched (Fused) Red Red
12 V Battery Red/Black Red/Black
23 GND Black Black
4) Refit the GPS unit connected to the adaptor – it will be positioned in the front of the bike
now.
www.soloengineering.com `
Page | 2 support@soloengineering.com