Professional Documents
Culture Documents
Operation Manual of A3- flatbed printer (EPSON R1390) - 副本
Operation Manual of A3- flatbed printer (EPSON R1390) - 副本
Operation Manual of A3- flatbed printer (EPSON R1390) - 副本
catalog
一、Packing List
二、Introduction of A3-T shirt flatbed printer
三、Preparatory work before starting the machine
四、Preparatory work before printing the picture
五、Detail Process of Printing Object
六、Notable matters and common problems when using the
machine
七、Machine maintenance and after-sales terms
Limit board:
It is the best height to be printed
objects from the nozzle,when the
print tray just can pass the limit
board,if touch the limit board, it will
(二)Introduction of A3 T shirt Flatbed Printer damage print head, also don’t far
from the limited board, otherwise
the picture will fuzzy
The Flatbed Printer is a kind of ink-jet printing type high-tech digital printing equipment which works
object non-contact , its application field is very wide, it is a technical innovation in hand painting, all kinds of
transfer printing, screen printing technology.Use Textile ink, this machine can directly print on the surfafce of
T-shirt、Handkerchief and the other textiles materials, after printing ,the pattern is colourful,washing fastness
reach national level 4 standard. It really realize the true sense of one piece print up, no plate-making, namely
spray is dry, full color image completely
CISS Ink tube
Maintenance Window
Limit board
Cartridge Holder:
used to put the ink bottle. the level of the ink must
lower than the print head
Power jack
USB jack:
Used for printer and computer connection
Up/Down switch
Used to adjust the height of the print tray,the max
Up/Down switch
height is 8cm
No used switch:
This switch don’t work
NO used switch
Technical parameters:
Printer type:Epson R1390
Equipment size:770*640*462mm
Packing size:890*750*550mm
This machine is modified from heart EPSON R1390 printer, please use the EPSON R1390 printer driver and
the compatible consumables, for the detailed specification, please refer to the printer’s instructions.
Characteristic as following:
●Applicable nearly all kinds of material and picture can be directly spray printed
不适用
●Without plate-making,it have output characteristics of time saving and economy,and have fast proofing and
production
●Uneven materials (uneven within 2mm) all can directly spray printing
●Stable performance, repeat print does not shift, humanized appearance design , simple and easy maintenance
● the print tray adjust by electric, the surface of print tray is flat, and the print resolution is very high
Printing sample:
二、Suction Ink
Make the cartridge Please insert each pipeline to
holder and machine on the corresponding ink bottle Make sure the wast ink
the same level, then put according to the label of the pipe is it the waste ink
ink bottle in the cartridge pipeline bottle
holder
Remarks:
If you need to transport the machine,please take out the ink sac ,and lift it
up,then take out the waste ink pipe from the waste ink bottle , use syringe to
suck the ink sac and ink pipe ,make it empty, then make the end of the pipe
bend,in order to avoid the ink spillover and dirty the machine
You must make sure the ink sac and ink pipe empty ,if you don’t suction it
empty, the ink will back flow, the machine will be very dirty in this condition
transport
Take out the waste ink pipe ,don’t put it in the machine, find a bottle which
is corrosion resistant, then put the waste ink pipe in the bottle, the wast ink
will come in to the bottle when you do head cleaning
三、Move The Print Head(please check the video for adding ink)
1、The print head cartridge will stop at the right side of the printer after it finish self-checking, and
automatically lock,it is unable to move
2、In order to fill ink sac up with ink more easily, we should do like this:
A、If the printer is already turn on,please turn off the power switch firstly
B、Turn on the total power when the print head cartridge don’t move
C、Pull up the total power-line immediately while the print head cartridge move left a little
D、At this time, the print head cartridge is not lock,you can easily move it back and forth
by hand
四、Suction Ink(the following ink sac is black , T-shirt use white sac, just the color is different, the
way of suction ink is the same )
Note: every time, you must make sure the print tray is located in the rear position before print, the
print tray work from behind, it will stop in the front position after finish printing
Fix \ A4 paper on the print adjust the height of the Push the print tray to the behind
tray, make the surface flat, print tray,just can through position where there is USB
avoid touch the print head the limited board
2): Make sure the USB line and Computer connection is in good condition, the print tray is in the rear
position,then print nozzle check ,as following pictures:
3): when release print task, the print head cartridge will move left and right ,and spray ink, the print tray will
move forward automatically, when print task is finished, the print tray stop in the front, then please check
the nozzle check picture
一、Picture Design :
1、 Choose high precision picture to print,if the picture is fuzzy,low precision,, the print effect will very bad
2、 If you design the picture by yourself. You should save the picture to PNG、TIFF、JPG format
You can design the picture with PS,Corel DRAW,AI and so on
PS study website:http://www.duote.com/tech/photoshop/
三、install the Acorip software(please check the video for installing Acorip software)
四、after finish installing the AcroRIP software,there will appear icon , insert soft dog ,then
click
“White layer
Generation” 、 “ Black Handing”
and so on , all of them can be
setted according to your needing
Choose white effect, it will print
white ink that shows black color on
the left
Step6、after white ink task finished, you can print color ink ,as followings
Step 7、after click “print”,the print tray will move for ward automatically, print head will move back and
forth ,the Printer Power switch light will flash, after the print task is finished, the print tray will
come to front place,and the Printer Power Switch light will stop flash
3、Ink bottle must be putted on the “Cartridge Holder”,.too high or low position is not good ,,it will
cause high pressure.the level of the ink must lower than the print head,otherwise the ink will leak out
from the print head
Please check the waste ink bottle at fixed period
5、After release print command,if the machine don’t print correctly, you need to cancel the print task
and release the new print command.
7、You had better add sewing machine oil on the track that the print head move back and forth,in order to
reduce resistance,otherwise it will happen flash red when start the machine ;
What’s more,we should add oil on the track that the print tray go through, if the track resistance is big,the
tray will not move, it will affect the print precision too
8、Because the white ink is easy to precipitate,it is best for customer to shake the white ink for several
minutes before using the machine everyday.If you don’t use the machine for a long time ,please shake the
white ink for several minutes and suction the white ink from the ink sac again(the way please see “Suction
Ink”),the ink that suction out can put back into the bottle and continue use,after suction the ink ,you should
do head cleaning again.
9、Attention of choosing picture
A、No matter the pictures from the Internet or the customer offer, you must determine the clarity of the
picture,poor clarity will cause poor print quality. Generally speaking,we should provide more than
300dpi to get good quality .
B、When we need to print pictures,it is best for us to design the picture the same size as material printed by
PS(or AI), please don’t directly modify the size in the AcroRIP, otherwise the picture will
widen or lengthen, the picture will be disproportionately
C、disproportionately you can study the PS on network
Study website: http://www.duote.com/tech/photoshop/
10、Ink reset button:when the machine print several pictures ,the Ink reset light will flash,,it is normal
condition, you just need to do ink reset, after finishing ink reset, the machine will go on
working,following is the way of do ink reset
( please check the video for doing ink reset)
11、SSC Service Utility: when the machine used a period of time ,the Trouble Lamp will flash,and the
computer will show“service request” ,it is normal condition, you just need to
do SSC Service Utility ( please check the video for doing SSC Service Utility)
When there is no white ink ,you just can print light materials “打印机设置”项选择
EPSON Stylus Photo R230
If you need print dark materials:
“打印机端口”选择现在
正在使用的打印机,即状
When there is white ink, you can print dark materials, also can print light materials
态显示“就绪”的 R230 打
印机
13、 Before printing dark materials, you must spray pre-coating evenly, otherwise the white ink effect will
not white after printing it on dark materials 墨水分辨率根据自己需要
进行设置,要求设置在
1440*720 以上
You must choose the good Press machine, the surface temperature of bad Press machine is to big, it
Will impact the dry effect and the picture’s color 如果双向打印的图案模糊,
就改为单项打印
(七)Machine Maintenance And After-sales其他项请按照左边图示进
Terms
Warranty: 行设置,请一定注意红色
圈内设置
1、because the machine in the application must use a special ink, for print head only guarantee good condition
When buying, After using the ink ,the nozzle blocking, pumps and accessories get corrosive , or the main
board burned when cleaning nozzle in a wrong way, they are not within the scope of free warranty.
2、Service scope: except the head and pump, the rest parts, free warranty 1 year (human factors except).
Customer assume the repair freight
when he
3、A、When you receive the goods,please read the instructions carefully(so that you are familiar with the
product part name),we can communicate more easily in time when you come across problems
B、after read the operate manual, please contact the seller for guidance immediately if something you don’t
understand;
C、If customers do not read the instructions,and they are not familiar with the name of the product
components,make call to seller directly ,our company will not deal with it.
D、If buyers don’t understand, and mishandled, or unauthorized disassembling machines, the buyer will
assume all the Consequences himself
Registration form:
Please register customers in time,so that we can track the information and provide good after-
sales service.
Equipment purchase date
Equipment type
Ink type
Name of purchaser
Shipping address
Contact phone
Contact QQ
Contact SKY/MSN
Machine Malfunction