Professional Documents
Culture Documents
Especificaciones
Especificaciones
inspired hydraulics.
10.2014
english
10000 Series
Benefits
• High power density for
demanding mobile and
industrial applications
• Many options to draw
from
Applications
• Boring
• Industrial
• Metal Forming
• Port Equipment
• Saw Mill
Description
This is the biggest disc valve motor of our line with
up to 45 GPM and 24,000 in-lb of torque in continuous
mode, this motor is powerful and yet provides good
efficiency.
10,000 Series
Specifications
Displ. cm3/r [in3/r] 345 [21.0] 480 [29.3] 665 [40.6] 940 [57.4]
Max. Speed Continuous 501 354 254 179
(RPM) @ Flow Intermittent 784 552 396 279
Flow Continuous 170 [45] 170 [45] 170 [45] 170 [45]
l/min [GPM] Intermittent 265 [70] 265 [70] 265 [70] 265 [70]
Torque* Continuous 1040 [ 9220] 1475 [13050] 2085 [18450] 2700 [23910]
Performance [250] [500] [1000] [1500] [2000] [2500] [3000] [3500] [4000]
15 35 70 105 140 170 205 240 275
Data [1] [600] [1310]
70 150
3,8 3 1
[2] [740] [1510] [3050] [4600] [6140] [7680]
Motors run with high 85 170 345 520 695 865
efficiency in all areas 7,5 21 19 15 11 8 4
designated with a number [4] [730]
80
[1500]
170
[3040] [4590]
345 520
[6140] [7680]
695 870
[9220]
1040
[10770]
1215
[12310]
1390
for torque and speed. For 15 43 41 37 33 30 26 22 18 14
best motor life select a [8] [720] [1490] [3030] [4580] [6120] [7670] [9210] [10750] [12300]
Performance [250]
15
[500]
35
[750] [1000] [1250] [1500]
50 70 85 105
[1750]
120
[2000]
140
[2250]
155
[2500]
170
[2750]
190
[3000]
205
[3250]
225
[3500]
240
[3750]
260
}
[3470] Torque [lb-in]
390 Nm
940 cm3/r [57.4 in3/r] 391 Speed RPM
∆ Pressure Bar [PSI]
[250] [500] [750] [1000] [1250] [1500] [1750] [2000] [2250] [2500] [2750] [3000] [3250] [3500]
15 35 50 70 85 105 120 140 155 170 190 205 225 240
230 475 725 970 1215 1465 1710 1955 2200 2450 2695
30 31 30 29 28 28 27 26 25 24 23 22
[12] [1990] [4170] [6350] [8540] [10720] [12900] [15090] [17270] [19450] [21640]
225 470 715 965 1210 1460 1705 1950 2200 2445
45 47 46 45 44 43 43 42 41 40 39
[16] [1930] [4110] [6290] [8480] [10660] [12840] [15030] [17210] [19390]
220 465 710 960 1205 1450 1700 1945 2190
61 63 62 61 60 59 58 58 57 56
[20] [1860] [4040] [6220] [8410] [10590] [12770] [14960] [17140] [19320]
210 455 705 950 1195 1445 1690 1935 2185
76 79 78 77 76 75 74 73 72 72
[24] [1780] [3970] [6150] [8330] [10520] [12700] [14880] [17070]
200 450 695 940 1190 1435 1680 1930
91 95 94 93 92 91 90 89 88
[28] [1700] [3890] [6070] [8250] [10440] [12620] [14800] [16990]
190 440 685 930 1180 1425 1675 1920
106 111 110 109 108 107 106 105 104
[32] [1620] [3800] [5980] [8160] [10350] [12530] [14720]
185 430 675 920 1170 1415 1665
121 127 126 125 124 123 122 121
[36] [1520] [3710] [5890] [8070] [10260] [12440] [14620]
170 420 665 910 1160 1405 1650
136 143 142 141 140 139 138 137
[40] [1420] [3610] [5790] [7970] [10160] [12340] [14520]
160 410 655 900 1150 1395 1640
151 159 158 157 156 155 154 153
[45] [1290] [3480] [5660] [7840] [10020] [12210] [14400]
145 395 640 885 1130 1380 1625
170 179 178 177 176 174 174 173
[60] [860] [3040] [5230] [7410] [9600] [11780]
95 345 590 835 1085 1330
227 239 238 236 235 234 233
[70] [540] [2720] [4910] [7090] [9270] [11460]
60 305 555 800 1045 1295
265 279 278 276 275 274 273
Standard Mount
Y Max.
X
Port B
14,5/13,2
[.57/.52] 17,02/16,51 150,1 [5.91] Max
22,4/20,8 [.670/.650]
[.88/.82] Dia. (4)
127,00/126,87
[5.000/4.995] Dia. 147,1
[5.79]
Max.
Wheel Mount
Y Max.
X
Port B
131,1/127,8
[5.16/5.03] 184,9 [7.28]
21,1/20,0 Square Max.
[.83/.79]
127,0
[5.00] 177,80/177,67
Dia. 139,7 [7.000/6.995]
[5.50] Dia. (2)
Dia.
209,55 [8.250]
Dia. Bolt Circle
5,9/4,8 17,02/16,51
[.23/.19] [.670/.650] Dia. (4)
Bearingless
Y Max.
X 20,88/20,52
Port B [.822/.808]
Dia. Thru (4)
161,64 200,5
[6.364] [7.89]
Square Square
Max.
152,40/152,27
[6.000/5.995]
Dia.
12,7/12,4
[.50/.49]
Dimension D mm [inch]
Eaton Part No.
13280-001 133,6/128,5
[5.26/5.06]
BEARINGLESS MOTOR DIMENSIONS
13280-002 156,0/150,9
Displacement X Y [6.14/5.94]
cm3/r [in3/r] mm [inch] mm [inch] D
For 10,000 bearingless motor
345 [21.0] 158,0 [6.22] 256.3 [10.09] application information,
480 [29.2] 170,7 [6.72] 269,0 [10.59] contact your Eaton repre-
665 [40.6] 170,7 [6.72] 269,0 [10.59] sentative (mating coupling
940 [57.4] 189,0 [7.44] 287,5 [11.32] blanks available from Eaton
Hydraulics).
Note:
After machining blank,
part must be hardened
per Eaton specification.
10,000 Series
Installation
Information
Bearingless -B-
Coupling Depth
89,2 ± 0.8
[3.51 ± .03]
51,1 ±1,8
[2.01 ± .07]
1 Internal spline in mating part to be as
-B- follows: Material to be ASTM A304,
Coupling Depth
8620H. Carbonize to a hardness of 60-64
89,2 ± 0.8
HRc with case depth (to 50HRc) of 0,076 -
[3.51 ± .03]
1,02 [.030 - .040] (dimensions apply after
51,1 ±1,8 heat treat).
[2.01 ± .07]
Case Flow
-A-
Case Flow
Case Flow
43,56 -A-
[1.715] Min.
10,000 Series
Dimensions
Shafts
10,000 Series
Side Shaft Load
Capacity
3500 [ 8000]
[ 7000]
3000
Max. Axial Loads [ 6000]
908 kg [2000 lb] 2500
[ 5000]
B 10 bearing life (2000 2000
[ 4000]
hours of 12,000,000 shaft 1500 [ 3000]
revolutions at 100 RPM)
at rated output torque.
-20 0 20 40 60 80 100 120 140 160 180 200 220 240 mm
To determine radial load at
speeds other than 100 RPM, [-1] 0 [1] [2] [3] [4] [5] [6] [7] [8] [9] [inch]
multiply the load values
given on the bearing curve
by the factors in the chart Mounting Surface
below.
10,000 Series
Dimensions
Ports
7/16-14 UNC x
9/16-18 UNF O-ring
29,2 [1.15] Deep (8)
Case Drain Port
Port B
15,10
[.594] (2)
30,20 Port A
29,5/27,4
[1.188] (2) 29,40 [1.16/1.08]
[1.156]
Port A
29,5/27,4
[1.16/1.08]
76,2/74,1
[3.00/2.92] 45° 106,2 [4.18]
30,8/29,2 [1.21/1.15] 184,7 [7.27]
End View
Common Dimensions
154,0 [6.06] Max.
74,0/72,1
[2.91/2.84]
121-1014
10,000 Series The following 30-digit coding system has been developed to
identify all of the configuration options for the 10,000 Series
motor. Use this model code to specify a motor with the
Model Code desired features. All 30-digits of the code must be present
when ordering. You may want to photocopy the matrix below
to ensure that each number is entered in the correct box.
M 10 *** ** ** ** ** * 00 * * ** 00 ** ** 00 *
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
10,000 Series
Two-Speed
Description
The Eaton 10,000 Series Two speed motors are Pilot pressure may come If you are operating in a
motors are available with an available with a return line from any source that will critical area and a restriction
integral two speed feature closed center shuttle for provide uninterrupted in the hydraulic line causes
that changes the displace- closed circuit applications. pressure during the high concern, these two speed
ment in a ratio of 1 to 2 and Low speed high torque speed mode operation. Pilot motors can be ordered
shifts the motor from a low mode is the normal position pressure 6,9 ∆ Bar [100 ∆ timed with CW preferred
speed high torque (LSHT) of the speed selector PSI] minimum, up to the full HSLT shaft rotation. Hence,
mode to a high speed low valve. When a differential operating pressure of the with this option port B will
torque (HSLT) mode. The pressure is supplied to motor. have to be pressurized for
open center selector valve the pilot port and 6,9 Bar In normal LSHT operation CW preferred HSLT shaft
shifts the speed mode from [100 PSI] is reached, the the Char-Lynn two speed rotation. The restriction
low to high speed when selector valve overcomes motor will function with recommended for the line
pilot pressure of 6.9 ∆ Bar the return spring force and equal shaft output in either connecting port B remains
[100 ∆ PSI] minimum is the spool shifts to the high direction (CW or CCW), the unchanged. Finally in
applied to the pilot port (6.9 speed mode. The oil in the same as the single speed closed circuit applications a
Bar [100 PSI] higher than opposite side of the spool is Char-Lynn disc valve motors. hydraulic line restriction is
case pressure). In the high drained internally. Pressure not required. Instead, the
However, to prevent
speed mode torque values between the pilot supply charge pump can be used
cavitation in the HSLT mode,
are approximately one half and case drain or return to supply and maintain a
the preferred direction of
with twice the speed of the line (depending on open or minimum pressure of 14 Bar
shaft rotation is counter
10,000 Series
Two-Speed
Typical Hydraulic
Circuit
Note:
Pilot Pressure 6,9 D Bar [100 D PSI] Min. The schematic diagram
Check Valves below applies to 10,000
series two-speed motors –
Two Position Three Way Valve
differs only in orientation of
shift valve spool and spring
LSHT HSLT (this orientation of spool and
spring positions the pilot
port on the opposite side of
Pilot Port
the port face).
Port B
Port A Port A Port B
Restriction 14 Bar [200 PSI]
and Check Valve
Pilot Port
Output
Shaft
Two Speed
Motor
10,000 Series Schematic
Motor —
Two Speed
High Speed
Low Torque
Speed - RPM
2 - Speed Operating Range
10,000 Series
Two-Speed
Specifications
Displ. cm3/r [in3/r] High Speed Mode 169[10.3] 239 [14.6] 332,7 [20.3] 470 [28.7]
Low Speed Mode 345 [21.0] 480 [29.3] 665 [40.6] 940 [57.4]
Max. Speed (RPM) High Speed Mode 750 630 500 400
@ Continuous Flow Low Speed Mode 375 315 250 200
Flow High Speed Mode 130 [35] 170 [45] 170 [45] 170 [45]
l/min [GPM] Low Speed Mode 130 [35] 170 [45] 170 [45] 170 [45]
Torque* High Speed Mode
Nm [lb-in] Continuous 440 [ 3900] 630 [ 5600] 905 [ 8000] 1175 [10400]
Intermittent 585 [ 5200] 845 [ 7500] 1130 [10000] 1470 [13000]
Ports
10,000 Series
1 5/16 -12 UN-2B SAE O-ring Staggered Ports (2)
Two-Speed 3/4 -16 UNF-2B SAE O-ring Case Drain Port (1)
7/16 -20 UNF-2B SAE O-ring Pilot Control Port (1) or
Dimensions 4 bolt 1 1/4 inch Split Flange Ports (2)
Standard and Wheel 3/4 -16 UNF-2B SAE O-ring Case Drain Port (1)
7/16 -20 UNF-2B SAE O-ring Pilot Control Port (1)
Port B
Y Max.
Port Locations — X
Same as Shown Below
Port B Port A
Port Locations —
Same as Shown Below
169,2
[6.66]
Max.
93,3/87,6 Port B
[3.47/3.45] 105,5/104,3 Y Max.
[4.15/4.11] X
188,5
13,8/13,2 3/4-16
UNF-2B 58,7/57,1
[.54/.52] [2.31/2.25]
O-ring Case
Drain Port
Size 8
2 Inch
1/8 1 1/4 inch Split Flange 120-2009 -2010 -2011 -2012
Wheel 16 T Splined
Motor
2 1/4 Inch 1 5/16 O-ring 120-2013 -2014 -2015 -2016
Tapered 1 1/4 inch Split Flange 120-2001 -2002 -2003 -2004
121-2002
Order Numbers
FT Article Number Eaton Code Type
1248844 119-1028 CHAR-LYNN MOTOR SERIE 10.000
1248845 119-1029 CHAR-LYNN MOTOR SERIE 10.000
1248846 119-1030 CHAR-LYNN MOTOR SERIE 10.000
1248847 119-1031 CHAR-LYNN MOTOR SERIE 10.000
1248848 119-1032 CHAR-LYNN MOTOR SERIE 10.000
1427424 119-1032 CHAR-LYNN MOTOR SERIE 10.000
1248849 119-1033 CHAR-LYNN MOTOR SERIE 10.000
1248850 119-1034 CHAR-LYNN MOTOR SERIE 10.000
1248851 119-1035 CHAR-LYNN MOTOR SERIE 10.000
1427457 119-1035 CHAR-LYNN MOTOR SERIE 10.000
1248852 119-1040 CHAR-LYNN MOTOR SERIE 10.000
1410857 119-1041 CHAR-LYNN MOTOR SERIE 10.000
1248854 119-1042 CHAR-LYNN MOTOR SERIE 10.000
1248855 119-1043 CHAR-LYNN MOTOR SERIE 10.000
1434757 119-1043 CHAR-LYNN MOTOR SERIE 10.000
1417069 119-1045 CHAR-LYNN MOTOR SERIE 10.000
1248857 119-1046 CHAR-LYNN MOTOR SERIE 10.000
1248858 119-1047 CHAR-LYNN MOTOR SERIE 10.000
1248859 119-1065 CHAR-LYNN MOTOR SERIE 10.000
1429263 119-1095 CHAR-LYNN MOTOR SERIE 10.000
1431425 119-1119 CHAR-LYNN MOTOR SERIE 10.000
1411531 119-2002 CHAR-LYNN MOTOR SERIE 10.000
1422724 119-2003 CHAR-LYNN MOTOR SERIE 10.000
Order Numbers
FT Article Number Eaton Code Type
1414970 120-2008 CHAR-LYNN MOTOR SERIE 10.000
1421379 121-1009 CHAR-LYNN MOTOR SERIE 10.000
1248875 121-1010 CHAR-LYNN MOTOR SERIE 10.000
1302110 121-1011 CHAR-LYNN MOTOR SERIE 10.000
1417602 121-1012 CHAR-LYNN MOTOR SERIE 10.000
1423115 121-1013 CHAR-LYNN MOTOR SERIE 10.000
1248876 121-1014 CHAR-LYNN MOTOR SERIE 10.000
1316874 121-2002 CHAR-LYNN MOTOR SERIE 10.000
1414966 121-2005 CHAR-LYNN MOTOR SERIE 10.000
1414967 121-2006 CHAR-LYNN MOTOR SERIE 10.000
1303702 121-2007 CHAR-LYNN MOTOR SERIE 10.000
1303703 121-2008 CHAR-LYNN MOTOR SERIE 10.000
1248877 121-2022 CHAR-LYNN MOTOR SERIE 10.000